LED floodlight: how to choose the best model

Which LED floodlight is better?

To get an accurate answer to the question posed, you first need to decide what the LED device will illuminate. The correct choice of electrical product depends on this according to such parameters as: dispersion angle, power, color rendering and color temperature. If a spotlight selected according to these characteristics copes with its task, it can be considered the best.

The powerful Glanzen lighting device is considered the best for illuminating the facades of large buildings

In addition to characteristics, a good LED floodlight is chosen based on its manufacturer. Branded products are guaranteed to last a long time and will correspond to the stated parameters. However, the cost of LED devices is high. You have to pay for quality. Domestic-made electrical products have an affordable price, but this also has its own nuances. To choose the best model, you need to know more information about the manufacturer. In Russia they are conventionally divided into two groups:

1. The first group includes not manufacturers, but trademarks. In other words, they produce nothing. Companies buy cheap Chinese products and stick their logos on them. Moreover, for completely dishonest companies, these logos may change over time. The need for manipulation is explained very simply. Over time, the consumer learns about the poor quality of the product and stops buying it. The company changed the logo, launched advertising, and sales increased again. These spotlights are considered the worst. They do not shine as brightly as indicated in the specifications. For example, when testing an 11 W ASD LED device, its power was 25% less than declared, and the luminous flux was 20% less. The trick of all such companies is that, for the sake of sales, they inflate information about the characteristics by 10-30%. As a result, a person buys a bad spotlight that shines weakly and lasts a maximum of 1 year.
2. The second group includes manufacturers. They independently develop LED lighting devices and do not deceive consumers with inflated characteristics, as they value their name.

Important! There are up to 130 domestic manufacturers, but most of them produce LED products in China. In Russia they have a small workshop or research laboratory. This gives the right to be called Russian producers.

A popular domestic manufacturer belonging to the second group is Nanosvet. An electrical product from this company will be better than a similar device produced by one of the companies belonging to the first group. However, when compared with European brands, even Nanosvet is much inferior.

Important Points When Choosing the Best LED Flood Light

You cannot buy LED street floodlights without first studying the product and where it will be used.

First you need to decide for what purpose you plan to use the lighting. If the floodlight is installed on a construction site or some technical work will be carried out under it, it is better to choose more powerful models.

Roughly think about the placement of the light source. Please note that it will not illuminate everything around, but a specific sector, the size of which must also be calculated in advance.

Evaluate the ease of fastening. Consider whether it will be easy to install. If you need to move the spotlight frequently, take a look at mobile models.

If you are thinking about lighting for your dacha, you can choose a model with a photo relay. Then the lighting will turn on only at night.

Choose lamps with aluminum bodies. Whatever the degree of protection on a plastic floodlight, it is unlikely to withstand severe weather tests, including temperature changes.

To illuminate a specific area, it is better to prefer round-shaped devices. Elongated ones are suitable for lighting facades and swimming pools. And square ones are traditionally chosen for lighting large areas.

How to choose an outdoor LED floodlight

First of all, when choosing LED products, pay attention to its parameters. It depends on the characteristics whether the spotlight will provide complete illumination of the object.

The choice of lighting fixtures is carried out according to the characteristics of the product

The first thing people pay attention to is power. The parameter determines how far the device will shine and how much electricity it will consume in 1 hour. However, you need to take into account that even with a powerful LED spotlight, the level of illumination tends to decrease exponentially. This means that as power increases, the illumination area does not increase. The parameter varies from 10 to 500 W. The table will help you choose the right LED device based on power to obtain comfortable illumination:

The choice of lighting fixtures is carried out according to the characteristics of the product

Along with power, there is the next important characteristic – brightness. The parameter varies from 700 to 34000 Lm. The higher the brightness, the more clearly the spotlight will illuminate the object.

The dispersion angle determines how much area the spotlight can illuminate. If you need to focus attention on a small object, then an LED device is chosen with a dispersion angle of up to 100 degrees. When the question is which floodlight to choose for your dacha in order to illuminate as much of the area as possible, then preference is given to a product with a maximum illumination angle.

Color temperature affects the visual comfort of a person staying in an illuminated area. There are three spectra:

1. The warm white light is slightly reminiscent of yellow, like that of a regular incandescent lamp. The parameter value is 3700-4300 K.
2. Neutral white resembles the light from a fluorescent lamp. The parameter indicator is 4500-5500 K.
3. Cool white has a bluish tint. The parameter indicator is from 6000 K.

To illuminate areas where people relax, warm light is acceptable. Cold and neutral white light is used to illuminate streets, parking lots, and industrial facilities.

When choosing a reliable LED floodlight, look at its protection class. The parameter is designated by two letters IP, followed by numbers from 20 to 68. They indicate the degree of protection from moisture and solid particles. LED products with a minimum value can only be used indoors. For outdoor installation, the floodlight's protection level must be higher than IP44.

There are other parameters of floodlights, such as: protection from overheating, voltage drop, uniform illumination, material of manufacture. All of them affect the service life of the LED product.

Benefits and professional advice for choosing

Spotlight emitters using diodes have a number of advantages:

1. High quality light generation . The glow points do not burn out, do not flicker, or dim, as can be found in halogen, gas-discharge equipment or those equipped with tungsten filaments.
2. Long service life - manufacturers often give the total operating period of diodes from 30,000 to 100,000 hours.
3. Economical . The diode element does not consume much electricity; compared to halogen, the savings are 80% or 85% more.
4. Different methods of fastening . Installation can be suspended on brackets, on an arc, or overhead with a turn signal. There are also non-stationary and portable devices.
5. Safe for the environment . Failed radiation elements do not need to be returned to the store for proper disposal, as is done with gas lamps.
6. Brightness and uniformity of flow . Diodes spread their rays much further and have a much greater flux force.
7. There are no restrictions on the number of on/off switches.

How to choose the best video spotlight

10 recommendations for choosing outdoor floodlights

An outdoor floodlight must be suitable for use in rain, snow, and fog. For outdoor lighting, the “reaction” of the device to moving objects and people approaching the radiation source is important. When arranging the territory of squares, parks, stadiums or the property of a plant, factory of another enterprise, the following details are important when choosing a floodlight:

1. The degree of waterproofing and dust protection - in the marking is indicated by the letters “IP” - models with an IP value of at least 65-68 should be used.
2. Radiation angle – to cover the largest possible area with a beam, a device with a scattering angle from 135˚ to 350˚ is sufficient.
3. Atmospheric temperature - the optimal range is from -10˚С to +30˚С, the best range is from minus 40-45˚С to plus 40-45˚С.
4. Remote on/off and adjustment – ​​a control panel is required.
5. Motion sensors - you can choose those that “react” to heat and daylight, you can choose those that are triggered by sound (acoustic), or you can buy ones with a combined activation system.
6. The power must match the lighting area. For a porch near a house or country house, 30 W of power is sufficient. When covering large areas (a stadium, an entire street, an alley in a park), the power should not be less than 30-36 W.
7. The case material is any stainless and heat-resistant metal. Plastic options are not suitable.
8. The material used to make the protective lens is any durable transparent plastic or reinforced glass to prevent cracking or chipping under mechanical stress.

It should be noted that for using a spotlight outside a room, a device without a lens is not allowed at all. The device must be protected by a high-quality reflector and beam diffuser. High-quality outdoor lighting is due to a number of advantages that a particular model of lighting fixture has. You can choose a matrix option, where from 40 to 100, 220 diodes are built-in, or you can limit yourself to installing a whole network of points where devices with one diode for each are installed.

10 tips on how to choose a floodlight for an interior space

High quality lighting is also important inside buildings and structures. Therefore, you need to try to choose the most optimal option for floodlights. To do this, it is worth considering the following rules:

1. Acoustic motion sensors – for elevator areas, stairs and corridors. In high-traffic areas, a built-in system for triggering combustion when necessary is important.
2. Degree of moisture protection and insulation from dust - for household options, a class from 20 to 35-40 IP is suitable, for offices, lobbies, corridors and other things in buildings of various organizations - from 35 to 40 IP, for a production workshop or warehouse where there is a lot of dust and debris in the air - from 50 to 65 IP (reinforced version).
3. The radiation angle is important depending on the purpose - for studios 15-80˚ is enough, for living spaces - 100-120˚, for technical spaces - 120˚ or more.
4. Specification - the intended purpose is important due to differences in parameters. For example, for a studio, a device with greater brightness than the outdoor version, but with a lesser degree of protection from moisture and dust, can be installed.
5. Cooling – for equipment with a power of more than 70-100 W, different cooling systems are used to prevent overheating.
6. Installation type – stationary, removable or mobile. For filming in a photo studio, a portable spotlight will be important, and for illuminating rooms in living rooms, a stationary one will be important. Removable models can be used in any case.
7. The flow range is enough for no more than 5 m for studios, 2-4 m for housing and 10-15 m for dance floors, restaurants, theaters and more.
8. Materials for the housing are usually plastic and metal. The most powerful objects should have the latter.
9. Lens materials are durable and heat-resistant polycarbonate or reinforced shockproof fittings in case the unit falls from a tripod, for example.
10. Remote switching is not necessary, but is desirable for large spaces.

When sensors are installed, the lamps turn on after these small devices inside them are triggered, reacting to the approach of objects, people, or heat flow. Once turned on, they light up for approximately a few seconds or minutes, then turn off. This saves energy when you need to illuminate the interior of a building.

To choose the right floodlight, you must first decide what exactly it will illuminate - an office, an administrative building, a technical workshop, a storage facility, or in general it should be installed outside, where it will be exposed to various weather conditions. The price depends on the technical capabilities of the product, but it quickly pays for itself - for anti-vandal, for example, in 150 days, for household ones - in 30 days, for any others - in several months. In this case, service life is measured in years.

Which brand of LED spotlights is better?

The quality of lighting and the lifespan of an LED device largely depend on the manufacturer. Cheap models, for example, may not last a year. In addition, the light will be such that the owner will want to get rid of such a spotlight in a couple of months.

SOYUZ SFLSLED-DOB spotlights have proven themselves quite well

The best manufacturers of LED floodlights are Philips, Osram or Hyunday. As they say, such lighting devices are created to last. However, most of them belong to the premium class with a high cost. Quite good budget LED products are produced by Feron, Luna, Jazzway. The brands “Nanosvet”, “Soyuz”, “Era”, “Photon” have proven themselves to be excellent.

Results

LED floodlight is a complex, even “niche” category that has its own target audience. Not everyone needs a lighting fixture like this, but those who do need one need to know what to look for, what to consider, and what they might encounter when choosing the best option.

Our rating presents the best LED spotlights known in 2021 - you just have to choose the option that suits you in terms of characteristics and cost.

Video - Which LED floodlight is better to choose

Rating of outdoor LED floodlights

A detailed review of LED floodlights helps you choose the right model for specific tasks.

Best LED Floodlights for Premium Street Lighting

PREMIUM -10W has surge protection

The PREMIUM-10W model opens the rating of premium floodlights. The electrical product has a power of 10 W. IP65 protection degree allows for outdoor use. There is protection against voltage surges. Extreme thresholds: 90-285 volts. The anodized aluminum body has excellent heat dissipation. The luminous flux was tested with a lux meter and is 1000 Lm. Dispersion angle 120 o.

High-quality model with a glow temperature of 6400 K

In second place, the rating of floodlights is headed by the LEDCRAFT LCFL model with a power of 10 W. The LED device emits a luminous flux of 600-750 lm and has a protection degree of IP65. The dispersion angle is 120 o.

Powerful spotlight equipped with GREE (USA) LEDs – Matrix-1A

For lighting large objects, the PREMIUM100W model is a good choice. The electronics are protected from voltage surges in the range of 90-285 volts. Power 100 W. LEDs emit a luminous flux of 10,000 lm. The dispersion angle is 120 o. The anodized aluminum body dissipates heat well.

The best mid-priced outdoor LED floodlights

The domestic model ART.L401 from Nanosvet has increased brightness

In the middle price category, the rating of floodlights is headed by the electrical product ART.L401 from. The device has a power of 40 W. Due to the improved matrix, the luminous flux reaches 4000 lm. The driver is completely filled with sealant, which increases protection against moisture.

Convenient portable floodlight for the cottage and garden

The LED lighting device FERON 32088 LL-912 is designed in the form of a portable spotlight. The body has a comfortable handle and a stand made of two tubes. Spotlight power 20 W. The luminous flux is 1600 lm. The built-in battery lasts up to 6.5 hours.

The model operates at temperatures from - 45 to + 55 °C, which allows use in all regions of Russia

The LED device LD-Pro W 50 W, 18116 has good characteristics. A power of 50 W is enough to fully illuminate a large object. Voltage surges in the range of 100-265 volts are safe. LEDs emit a luminous flux of 3750-4250 lm.

The best LED floodlights in the low price category

A high-quality inexpensive floodlight is suitable for a garden

For organizing street lighting, an excellent option is the inexpensive model WOLTA WFL-10/06. The power of the lighting device is 10 watts. Works stably when the voltage drops to 140 volts. Dispersion angle 120 o. LEDs emit a luminous flux of up to 870 lm. SMD LEDs are designed to operate up to 50 thousand hours.

Cheap lighting fixture for illuminating small objects

The inexpensive but high-quality SMD AVT3 10W model is suitable for organizing entrance lighting, advertising signs, and any other small object. LEDs emit cold light - 6000 K. Power 10 W. Luminous flux – 850 Lm. Light dispersion angle – 120 o.

Bright lighting fixture equipped with 48 LEDs

The SAFFIT 20W LED outdoor lighting fixture consists of 48 bright SMD2835 LEDs housed in a waterproof aluminum housing. The glow color is cold – 6400 K. Total power – 20 W. LEDs emit a luminous flux of 1800 lm.

Useful tips

Useful tips will help you arrange the lighting of any object with the highest quality possible:

LED lighting fixtures are selected taking into account where they will be used:

1. When choosing a spotlight, the first thing to consider is what object it is intended for. Areas of architectural structures are illuminated with narrow beams with precise direction. To illuminate an area, a large angle of light dispersion is needed.
2. To illuminate alleys, sidewalks, and other objects where people periodically pass, it is best to consider the rating of floodlights with a motion sensor, which will help save energy. Such lamps turn on only when a moving object enters the sensor field.
3. There are spotlights that are controlled from a remote control. The idea is good, but such lighting will be expensive. If there is no special need for remote control, you can save money by not having a function.

It would not be superfluous to pay attention to the dimensions, weight, and mobility of the lighting device. A heavy and bulky product that is inconvenient to use.

Video review of the spotlight:

Features of operation of different types of spotlights

The most affordable ones are halogen, they have relatively low energy efficiency - 10-15 lumens/W. The service life of such a lamp is less than 1000 hours. It is most advisable to use them for periodic illumination of small areas, for example, a floodlight with a motion sensor in front of a gate.

Sodium and metal halide lamps have high energy efficiency - 80-120 lumens/W. At the same time, they are quite “capricious” to the ambient temperature, supply voltage, and require time to ignite and turn off. A short-term power outage and an attempt to re-ignite a lamp that has not cooled down can damage it.

LED spotlights are the most convenient and practical for both industrial and domestic use. Energy efficiency at the level of gas-discharge lamps, instant ignition and very long service life make them the most attractive. Ideal for lighting an area.