New kettle smells like plastic: what to do before use

A new kettle smells like plastic - a common occurrence for newly purchased household appliances. As extensive user experience shows, getting rid of unpleasant amber is not difficult; just remember all the practical wisdom of household use. An obsessive or subtle odor appears due to various chemical additives that are part of the plastic. The more expensive the product, the better the technical components, the less they emit their specific aroma. There are several ways to quickly and effectively get rid of the plastic smell in your electric kettle.

Cleaning with lemon

This is perhaps the oldest and most popular life hack, and here lemon is used in all forms. The cheapest option is to use regular citric acid; for a standard-sized kettle, one or two packets are enough. The process is not complicated: pour water to the maximum mark, add citric acid and boil. Leave the kettle of lemon water for 12 - 14 hours, boil again and rinse well with running water.

An alternative is to use the juice or peel of three to four lemons. The algorithm of actions will be the same: boil, insist and boil again. It is better to pour water through the spout, this will clean the filter and the outer surface of the plastic.

Important! It happens that a solution of citric acid corrodes parts at the joints. Indeed, a sad fact, but this only happens with low-quality equipment. Good plastic will not deteriorate under the influence of lemon solution, even with regular boiling.

The acids contained in lemon will clean the inside of the kettle and bring metal parts to a shine. The advantage of the method is its absolute environmental friendliness, because lemon does not contain any kind of chemicals and leaves no odor or residue.

Orange zest

A good way to drown out the polymer taste is to treat the inner container with a citrus-flavored liquid.

To do this you need:

peel 5 oranges, lemons, tangerines or grapefruits (you can make a mix of different fruits);
to enhance the aromatization effect, it is better to grind the peel in a blender or simply finely chop it with a knife;
the mixture is placed in a kettle, then filled with cold water to the maximum mark;
the device heats up to boiling;
flavored water is left inside for one day;
the next day, without pouring the liquid out of the kettle, you need to repeat the boiling process;
After the liquid has cooled, pour it out and rinse the inner flask under running water.

Sugar

Another handy remedy for eliminating the chemical smell in a new kettle is regular sugar with the addition of citric acid. It can be used in two ways.

First option:

take a full kettle of cold water and boil it;
after turning off, add 3 tablespoons of sugar with a pinch of citric acid;
Without turning on the kettle, leave the sweet mixture for 10-15 minutes;
drain the syrup and rinse the inner walls well with water.

Second option:

pour three tablespoons of sugar into an empty kettle and leave for 12 hours without adding water;
after time, dilute half a teaspoon of citric acid in warm water;
Use the resulting liquid to rinse the kettle of sugar;
Finally, rinse with running water.

How to use bay leaf

If you don’t have citric acid or fruits at hand, then bay leaves are present in almost any kitchen. Laurel leaves also do not contain chemical compounds and join the list of environmentally friendly ways to combat the unpleasant smell of plastic in a teapot.

Unlike lemon, laurel quickly gets rid of the aroma of plastic and dyes. Pour half a bag of dried leaves into a kettle, add water and bring to a boil, then let it brew for an hour to an hour and a half. Then bring it to a boil again, drain the water and rinse the kettle.

It is important here to check if there are any pieces of leaves left in the kettle or filter. Even small branches will transmit the spicy scent of laurel to tea or coffee. It would be a good idea to ventilate the device a little after washing.

How to get rid of plastic smell in an electric kettle using cleaning products

Soda and vinegar

Boiling water

Chemicals

Products made of enamel and stainless steel do not pose a health hazard and are safe to use. The only drawback of an iron electrical appliance is the “metallic” smell of water. Often, an unpleasant odor indicates that the tap liquid contains harmful impurities.

If the problem is water, use filters regularly to clean it.

If there is a metal smell due to the kettle, you can eliminate the problem using the following methods:

pour water into an enamel kettle, add 2-3 tbsp. l. soda Turn on the stove, heat to boiling temperature. Then simmer over low heat for half an hour;
use apple, pear and potato peels. Fill the bowl with water, add cleaning, wait until it boils. Let it brew for 2-3 hours, the unpleasant smell will go away;
Pour water and an arbitrary amount of brine into the device. Boil the liquid, leave for 1-2 hours;
Place 1-2 tbsp on the bottom of a dry electric kettle. l. coffee or aromatic tea. Leave overnight;
boil water with bay leaf (half a pack of leaves for 1 teapot);
boil the liquid, add 2 tbsp. Sahara. After half an hour, rinse the kettle;
After repairing an electrical appliance, an unpleasant odor may occur due to residual technical oil. The problem can be eliminated by washing the kettle with soapy water and drying it with the lid open.

Do not remove odors from enamel cookware by boiling sweet carbonated drinks in them, as this may damage the appliance.

If the above methods do not have an effect, think about whether it is worth using such an electric kettle. An unpleasant aroma indicates the use of low-quality (and possibly dangerous) materials in production. Chemicals will enter food, which is harmful to health.

Article verified

by the editors

The new kettle smells:

Due to residues of special technical oil that were used during the production of the device and were not completely removed after completion of the manufacturing process. In most cases, this problem can be solved by boiling water three times in a new device, which should help get rid of the unpleasant aroma;
Due to the smell of chemicals and plastic that got into the hermetically sealed bag with the device at the manufacturer. This situation can also be solved without using any improvised methods. It is enough just to boil the new device with plain water, and then leave it to air for 3 days (preferably in a well-ventilated area). This method allows you to get rid of the stench forever;
Because of the plasticizer that is used to create all plastic parts of electrical appliances. Its main function is to extend the service life of the product, but it is very harmful to human health. If this smell cannot be removed by boiling and airing, then it is better not to use such a device, but to buy a new one of high quality;
Due to the use of cheap dye. If the smell of this dye also cannot be eliminated by boiling, then you should stop using the device.

The first two reasons are quite harmless and easy to get rid of. The second two are very significant and the use of a new device that has an unpleasant odor of this nature is strictly not recommended. In this case, the new kettle should be returned to the store and demand replacement with another device or a refund of the money paid for the product.

Important! It is prohibited to use water from a new kettle, which emits a fetid odor of plastic, for food purposes due to the toxic substances that are released when low-quality plasticizers and dyes are heated.

In order to get rid of the plastic smell in a new kettle, it is not at all necessary to go to the household chemicals department and buy specialized cleaning products. Every housewife has everything she needs in her kitchen to easily cope with this problem. The advantages of such methods are their low cost and high efficiency.

Baking soda has long established itself as a highly effective cleaning agent that removes dirt and gets rid of odors of a wide variety of nature and origin. It can also be successfully used to combat the smell of plastic from a new electrical appliance.

To get rid of the “aroma” emanating from a new device, use soda to do the following:

fill the electrical appliance with clean water to the maximum possible level;
pour 4 tbsp into a container. (without a slide) regular baking soda;
stir the soda until it is completely dissolved;
boil the resulting solution once;
leave everything unchanged for about 2 hours;
repeat the boiling procedure;
Wash the new electrical appliance thoroughly.

Lemon is widely used not only in cooking, but is also quite in demand for removing dirt and odors from various surfaces. Concentrated citric acid successfully helps to cope with “aromas” of various origins. In order to get rid of an unpleasant odor, you should:

fill the new electrical appliance with clean water up to about (“MAX”);
pour out two bags of lemon;
bring the resulting solution to 100 degrees;
leave the new product in this form for about 12 hours;
re-boil the settled liquid;
Rinse the device until the lemon solution is completely washed away.

At first glance, a product such as sauerkraut is absolutely inapplicable in the matter of cleansing anything. However, this is a misconception, and in practice cabbage has proven itself to be very successful. In order to get rid of stench in this non-standard way, you need to:

fill the container of the new device one third with sauerkraut with a large amount of brine;
add water to the device to the maximum permissible level;
boil the resulting mixture;
leave the container in this form for approximately 3 hours;
after the specified time, empty the device container of all contents;
Wash the device as usual.

We suggest you read: How to descale a regular kettle

Important! The more sour the cabbage chosen for cleansing, the faster and better it will cope with the need to remove the smell of plastic.

The juice of a citrus fruit such as lemon can easily help get rid of the plastic aroma in a newly purchased electric kettle. To increase the effectiveness of this method, it is recommended to use citric acid in combination with fruit peel. To clean using this method, perform the following steps:

squeeze the juice of three lemons into a separate container;
pour the contents into the device;
cut the peel remaining from the used fruit into small pieces;
add lemon slices to the container of the electrical appliance;
Fill the new kettle with clean water to the maximum possible level;
boil the contents;
leave the device unchanged for a period of 12 to 24 hours;
clean the contents of the kettle;
wash the electrical appliance.

If the desired result has not been achieved and the smell is not completely removed, then you should repeat the procedure again until the “aroma” is completely eliminated.

Vinegar has also proven itself positively in the fight against volatile aromatic substances of a wide variety of nature. To get rid of stench using this method, it is better to take 9% vinegar. If you only have 70% vinegar essence on hand, then it should be used in the following proportion: 1 tbsp. l. vinegar per 1 liter of liquid. To get rid of the smell you should:

pour 250 ml of cold clean water into the kettle;
add 125 ml of 9% acetic acid to the liquid;
fill the kettle with water up to about;
heat the resulting solution in a kettle, but do not bring to a boil;
do not touch the kettle for about half an hour;
repeat the heating procedure;
Wash the device thoroughly.

If necessary, the entire procedure should be carried out again.

Laurel can quickly and easily remove the plastic aroma from a new electric kettle. In order to remove the smell from the electric kettle, you will need to perform the following steps:

fill the container with cold water to the maximum possible level;
put approximately -7 bay leaves into the liquid;
boil the device;
do not touch the device for 3 hours;
re-boil the liquid;
drain the resulting solution and rinse the device.

Important! After using this method, the smell of the bay leaf itself may remain in the device. In order to remove it, you will simply need to leave the device for airing for several days.

You can get rid of the smell of plastic from a new electrical appliance by using the peels of citrus fruits (lemons, oranges, grapefruits). To use this method you need:

peel 5 - 6 any citrus fruits;
cut the peel into small slices;
place cleaning products inside the electrical appliance;
fill the contents of the device with cold water up to about;
boil;
do not touch the device for 24 hours;
at the end of the specified time, repeat the boiling procedure;
empty the device of all contents;
Wash the container thoroughly.

Regular sugar will also help eliminate the plastic smell in your new electric kettle. Moreover, using sugar, you can remove amber from plastic using several methods at once.

First option:

fill the electrical appliance with water up to about;
boil the liquid;
add 2 - 3 tbsp to boiling water. l. sugar (white or brown);
wait about 10 minutes;
drain the liquid and wash the electrical appliance in running water.

Second option:

pour 3 tbsp into an empty new electric kettle. l. granulated sugar;
do not touch the device for 12 hours;
After the specified time, wash the device with warm water and lemon juice.

Attention! For this procedure, lemon juice is added in an arbitrary amount.

Many carbonated drinks (Coca-Cola, Sprite) contain phosphoric acid, which has the property of dissolving oils and technical fluids. Thus, these drinks will help get rid of the aroma that comes from your new electric kettle. To perform cleaning you must:

Fill the appliance to the maximum possible level with soda;
boil all contents;
leave everything until completely cooled;
repeat these steps about 3 times;
clear the new device of contents;
wash the product thoroughly.

Activated carbon has many beneficial properties. It will also help to get rid of the smell of plastic from a new kettle. In this case, you can use any type of coal. To do this, you will need to perform sequential manipulations:

put 15 tablets of activated carbon into an empty electric kettle;
close the lid;
wrap the device with plastic wrap;
leave the new device in this form for 24 hours;
after the required time has passed, empty the container of all contents;
pour clean water up to about;
boil and drain the liquid.

Acetic acid

Soda solution and vinegar for odor removal

Baking soda is a universal household cleaner and a fairly safe one. The use of the usual powder is quite extensive: cleaning dishes, plumbing fixtures, ashtrays from tobacco smell. Baking soda is also useful in combating the “new kettle” aroma. Water, as in previous cases, must be filled to the maximum level. Add 3 – 4 large spoons of baking soda and mix well until the powder dissolves. Bring to a boil once, leave for a couple of hours and boil again.

Baking soda is an alkali, as you know, it perfectly neutralizes acidity, therefore, eliminates various specific odors.

In the absence of soda, vinegar along with vinegar essence will do. Pour 150 ml of 9% vinegar and two tablespoons of 70% acetic acid into a kettle of water. Turn the kettle on and off without letting the liquid boil. After simple manipulations, rinse the container thoroughly.

How to get rid of plastic smell in an electric kettle using cleaning products

There are many ways to remove odors from a new kettle. Most often housewives use:

table vinegar;
baking soda;
lemon juice and peel, or citric acid.

Each product is quite effective and will help remove the smell of plastic. Before using them, it is better to wash the kettle with a sponge and dishwashing gel.

The method of removing odor using lemon consists of several steps.

Fill the electric kettle with water to the maximum level.
Cut 2-3 lemons in half and squeeze the juice into the teapot.
Grind the squeezed halves and add them to the water.
Turn on the electric kettle so that the water in it boils.
When the kettle turns off, leave the lemon solution inside for 24 hours.
After a day, repeat the entire procedure.
Wash the kettle with clean water.

Using citric acid instead of lemon has similar effects. For a full electric kettle, add one tablespoon of acid.

Most often, performing this procedure is enough to remove the smell of plastic and rubber. If the synthetic aroma remains in the kettle, then you can repeat the method or use other means.

You can also get rid of the smell using baking soda. This method requires less time and consists of the following steps.

Add three tablespoons of baking soda to the electric kettle.
Pour water and turn on the device.
When the soda solution boils, wait until it cools and boil it again.
Pour out the water and wash the kettle.

When using vinegar to remove odor, do not use acetic acid. It can ruin an electric kettle, especially if you overdo it with the dosage, making it unsuitable for further use. To remove the smell, use 9% table vinegar.

Pour half a glass of vinegar into the kettle.
Fill up with water to the maximum level.
Turn on the kettle and wait until the solution heats up, but does not boil, and turn off the electric kettle.
Drain the vinegar solution and rinse the device.

If there is no soda, lemon or vinegar in the house, then you can try to remove the smell using detergents based on alkaline-water solutions. Similar products are used to clean various kitchen surfaces.

With its help, you can get rid of the smell in the following way:

The inside of the entire device must be treated with a detergent (both liquid gel and powder detergent or a combination of both will do);
Wash the product thoroughly and remove all remaining cleaner;
Boil the device with clean water several times.

Important! It is necessary to completely remove the cleaning component from the entire surface of the device to prevent it from getting into food.

Anti-scale products

They will help get rid of not only scale, but also the unpleasant aroma that comes from the new device. They should be used strictly following the instructions on the packaging.

We suggest you familiarize yourself with how to clean carbon deposits in an engine? | TuningKod

This product can also be used on a new kettle. Algorithm of actions:

treat the entire device with a cleaner from the inside;
wash its container thoroughly;
Boil the device with clean water repeatedly.

Carbonated drinks

Sprite is a highly carbonated lemon-based drink. No matter how funny it may be, it can really remove obsessive plastic odors from a new kettle. The list of suitable sodas also includes Coca-Cola.

Unlike previous methods, here you need to pour in sparkling water instead of regular water and boil it several times in a row, allowing the drink to cool slightly. Next, rinse the container well under running water. In addition to the absence of any odors, the kettle will be well cleaned of any technical liquids, for example, oil residues.

The principle of operation is simple: these drinks contain a component such as orthophosphoric acid (E338). Thanks to this, it perfectly cleans the entire internal surface of the kettle, simultaneously eliminating all unnecessary odors.

What to remember

remove the smell of plastic from a new electric kettle using natural remedies: lemon, bay leaf, baking soda, table vinegar, Coca-Cola, Sprite, sugar, sauerkraut, charcoal.
remove the chemical smell from an electric kettle using dishwasher detergent.
extend the life of your kettle for many years by caring for it properly.

Video: how to get rid of the plastic smell in a kettle

Activated carbon

The ability of activated carbon to absorb odors can be useful when eliminating plastic odors in a new kettle. To do this you need to take several sequential steps:

Place 15-20 charcoal tablets inside the empty device, then close the lid;
take cling film and tightly wrap the kettle with a lid, leaving no gaps for air access;
leave the resulting cocoon for one day;
the next day, remove the film, shake out the coal from the container and pour clean water inside to the maximum mark;
Boil the kettle and rinse thoroughly after cooling.

How to remove odor from a new electric kettle

If you didn’t buy the cheapest kettle from a well-known brand, but it emits a faint aroma of plastic, just boil it three times. Without auxiliary agents (soda, citric or acetic acid). If the procedure does not help, and after it the device “transmits” the smell and taste of plastic to the drink, try one of our recipes.

Source: www.SportObzor.ru

Seal
How to get rid of the plastic smell in a new electric kettle?

How to get rid of the smell in a new electric kettle. How to get rid of odor in a thermopot. How to get rid of odor in a coffee maker. How to get rid of plastic smell in plastic dishes.

Quite often, a new plastic kettle, especially if it is a budget option and made in China, has a persistent plastic smell that transfers into drinks and affects their quality. The plastic itself actually does not have a strong odor, and the kettle smells only of dye and plasticizer, which are specially added in large quantities to extend the life of the kettle and improve its appearance.

Agree, many have encountered this problem.

It’s probably trivial, but when purchasing, it is advisable to carry out an organoleptic examination yourself - smell it. It smells bad, don't take it. If the kettle meets sanitary standards, which should be noted in the documentation, then this is usually the case, and apart from a slight odor there should be no harm. If there is no such record, and household appliances were brought by friends who bought them on the border with China or via the Internet, then of course you need to think deeply about this. The good quality plastic from which the kettle is made will not have any odor. In any case, after the first boil it will go away forever. If anything happened before this. We do not recommend using this kettle.

Biological products for cesspools.

Otherwise, we can say that any plastic kettle is dangerous and you should only take steel ones. But they also have plastic parts.

In half of the cases known to us, equipment with a pungent odor was returned to the store. Try it, it might work.

Having considered this problem, we can come to the conclusion that the source of odor can be divided into 4 types:

A) Remains of process oil, which is washed off with boiling water in three spills.

This is especially true for metal flasks and stainless steel parts. (Or read further about cleaning methods). Not very dangerous.

B) The smell of plastic and chemicals that remained in the tightly packed product in a plastic bag at the factory. (the problem is solved by washing and airing for 3 days). Unpleasant, but not very dangerous.

C) The smell of plasticizer, which was added in excess to plastic parts and the body. It will be present in water and products. If it is not washed with boiling water 3 times, then it is definitely dangerous for health and it is better to get rid of this device (A blow to the liver and kidneys, it is safer to drink Cola every day). Agree, treatment will become several orders of magnitude more expensive.

D) The smell of plastic dyes. Same as point B). Less common. And it usually washes out faster. However, it is also dangerous.

3. How to get rid of the smell if you have already purchased it?

A) Boil a full kettle several times, changing the water (as usually stated in the operating instructions).

B) Boil the kettle by adding natural lemon juice, citric acid in bags or lemon peels. If you add lemon juice, then squeeze the juice from 1 to 3 lemons, pour into the kettle, add water to the maximum level, boil, leave the solution for 12 hours, boil again, drain the solution, rinse the kettle with running water. Repeat the procedure if necessary. We warn you that if the kettle is of poor quality, it can be completely damaged (from corroding contacts to dissolving low-quality plastic parts).

C) You can use vinegar or vinegar essence. To do this, pour water into the kettle, add half a glass of 9% vinegar, heat the kettle, but do not bring it to a boil, since when it boils, the solution will float out (a chemical reaction occurs), that is, it will pour on top of the kettle. Heat it several times, drain the solution, and rinse the kettle under running water several times. We warn you that if the kettle is of poor quality, it can be completely damaged (from corroding contacts to dissolving low-quality plastic parts).

D) Baking soda helps to cope with the smell of plastic. Fill the kettle with water, add 3 tablespoons of soda, boil the kettle, cool, boil again, drain the solution, rinse the device under running water.

D) A method of getting rid of plastic smell using bay leaves. Take a full kettle of water, add half a bag of bay leaves, bring to a boil, set aside for half an hour, then bring to a boil again, drain the water, remove the leaves from the kettle and rinse it thoroughly under water.

E) A teapot or stainless steel appliance gets rid of the smell of ordinary sugar quite well. It is enough to boil it, put a few pieces of sugar into the boiling water, close the lid and let it sit for 20-30 minutes, and then rinse it well and boil without sugar.

G) A cruel method, but it helped some - try boiling the sprite!

H) But be careful with cleaning products. Health is more valuable than a teapot. To eliminate the smell of plastic, special cleaning solutions with surfactants are sometimes used. Typically these include alkaline aqueous solutions containing surfactants. After using such solutions, it is recommended to thoroughly rinse the kettle several times; these solutions, if not washed out of the kettle, can cause health problems.

How to get rid of the plastic smell in a new electric kettle?

Source: aver.ru

Chemicals

If the means at hand do not help get rid of the obsessive odor, then it’s time to use specialized household chemicals.

Any dishwashing detergent

An inexpensive and effective way to eliminate any foreign odors. In this case, liquid gel, paste or powder for washing dishes is suitable.

Simply apply the cleaning agent to a sponge and thoroughly wash both the internal and external surfaces of the new kettle.

An important point is to thoroughly rinse off household chemicals under running water. To ensure the safety of subsequent use, it is best to test boil the water and then drain it.

Anti-scale products

Such chemicals are sold in any hardware store and help not only remove calcified build-ups in old kettles, but also disinfect the walls of a new device.

Important! For safe use, it is enough to strictly follow the instructions written on the packaging. For allergies, test boiling and draining after cleaning can be done twice.

Refrigerator cleaner with odor neutralizer

An odor absorber, which is often found in refrigerators, can serve a good purpose for a new kettle. Typically, the air purification unit is a plastic container with carbon filters inside. It must be placed in a kettle by analogy with the method of cleaning with carbon tablets and wrapped in film for a day. After a day, return the container to the refrigerator, wash the kettle and carry out a test boil.

Rules for working with household chemicals

When treating food surfaces with chemicals, it is important to adhere to simple rules of protection that do not harm health:

all products must have a neutral environment that does not corrode the skin;
You should use only soft powders and gels without adding abrasive particles that can damage the surfaces of food-grade plastic;
Under no circumstances should you use cleaning products containing chlorine;
even if the cleaning composition is intended for washing dishes, it is best to work with protective rubber gloves;
After using any chemical, it is necessary to repeatedly rinse all containers with running water and test boil the kettle.

After using chemicals, be sure to boil the water in a kettle and drain it!

How to get rid of plastic smell in an electric kettle using cleaning products

Manufacturers recommend that after purchasing a new kettle, be sure to boil it several times, draining and refilling each time.
This is required in order to clean the device from residues of production substances that come with new material and equipment at the factory. What to do if the smell does not go away with normal boiling? In this case, you can use some popular folk remedies.

https://www.youtube.com/watch?v=Bz6XTLRHF10

Let's look at the most effective methods of combating odors.

Lemon acid

The most environmentally friendly way to clean and remove odors is to use lemon or its derivatives. Dissolve 3 tbsp in a teapot. l. citric acid (50 g). You can replace it with lemon juice. You can also use lemon peels: boil water with the peels and leave to steep, rinse after a few hours.

Bay leaf

Pour water into the kettle and add 10 bay leaves (half a bag). Boil and leave for a couple of hours. Then boil again, rinse and can be used to boil drinking water.

Baking soda

Fill the kettle and dissolve 3-4 tbsp. l. regular soda. Bring to a boil and drain the resulting solution. If necessary, you can repeat the procedure. After the smell has disappeared, rinse the kettle.

Acetic acid

Add 2 tbsp to the water. l. acetic acid or 100–150 ml of table vinegar. Heat the kettle without bringing it to a boil (otherwise the bubbling acid solution will spill out). After using acid, be sure to thoroughly rinse the inside of the tank and leave it to air until the vinegar smell goes away.

To remove the plastic smell, you can simply boil Sprite or Cola in a new kettle several times instead of water. They contain orthophosphoric acid (and the first also contains citric acid), which not only eliminates odors, but also perfectly cleanses.

Fill the drink to the maximum permissible level, after boiling, drain and rinse.

Detergents

You can add a few drops of any cleaning solution when boiling, the main thing is. For example, powder or dishwashing liquid. After using foreign substances, it is important to rinse everything thoroughly to prevent chemicals from getting into your drink.

If your new electric kettle smells like plastic, do not use it until the smell is removed. The easiest way to get rid of the unpleasant aroma is to boil clean water three times. You can use other methods as well.

The natural component will clean the electrical appliance without harm to health. After treatment, just rinse the dishes in running water and you can use:

Squeeze the juice of 2-3 lemons, add to an electric kettle, fill with water to the maximum level, and boil. Let it brew for 30 minutes, repeat the procedure. This method will help remove the smell of burning, plastic, and remove mold.
Similarly, use the fresh peel of 4-5 lemons.
If you don't have lemon, use citric acid. 2-3 tbsp is enough. Proceed according to the scheme given above. Citric acid will remove stench and clean dirt.

Citric acid and lemon juice corrode the materials of a plastic electric kettle. The problem is typical for cheap Chinese devices containing plasticizers.

Soda and vinegar

Pour water to the maximum mark, add 3-4 tablespoons of soda (depending on the volume of the dishes). Mix the solution and turn on the device. Bring to a boil, let it brew for 2 hours. Vinegar will help get rid of the unpleasant odor in a new kettle. To do this, add 150 ml to the kettle. table vinegar and 2 tbsp.

When removing an unpleasant aroma, vinegar and acetic acid should not be boiled, otherwise it will flow through the top of the device.

The smell of plastic in a new kettle is removed by carbonated sweet drinks containing orthophosphoric acid (E338); there is no need to dilute them. Boil the liquid several times, then rinse the kettle.

Boiling water

In a new kettle, the aroma arises due to long-term storage in a sealed package. Boiling water 2-3 times will help remove the smell from a new electric kettle. Each portion of liquid is drained; it is not recommended to drink water until the odor is completely eliminated.

Chemicals

You can get rid of the problem using chemistry, following certain rules:

use household chemicals containing surfactants with a neutral environment;
do not use chemicals that contain abrasive substances (there is a risk of harming the surface of the device);
do not use store-bought household chemicals with bleach;
You only need to clean the kettle with chemicals containing surfactants, do not heat the substances;
carefully read the label with instructions for using household chemicals, avoid contact with eyes and mucous membranes, work with rubber gloves;
After treating the device with chemicals, rinse it with plenty of water, draining the first two portions of liquid.

If, upon purchase, a barely noticeable smell of plastic emanates from the electric kettle, this means that the kettle is still new and the aroma will soon go away. But the heavy and intrusive smell means that low-quality materials were used in the manufacture of such a kettle. Such a device can hardly be washed and get rid of the smell. It is advisable to take it back to the store and replace it with another one.

Reasons for the unpleasant smell of a new kettle:

The remaining technical oil that is used by the equipment manufacturer.
Plasticizing additives added to plastic to extend the life of the device.
Cheap dye.
Chemicals (or plastic) that have been in a sealed bag for a long time.
Other nuances.

An unpleasant odor may appear during the operation of the electric kettle. This happens due to stagnant water in the kettle, which was not replaced with fresh water before boiling.

The smell in the kettle can be affected by the quality of the tap water. With a high content of impurities, scale and sediment are formed, which provoke the appearance of an unpleasant spirit.

We suggest you familiarize yourself with How to remove water stains in the bathroom

If a musty smell appears, use home remedies: citric acid or sugar.

Pour water into an electric kettle and add 2 tbsp. citric acid. Boil and drain. Wash the device thoroughly.
Add 2 tsp to the bottom. Sahara. Leave for about 12 hours.

Pour in water, citric acid, heat. Empty the kettle of liquid and rinse the inside.

Almost all new kettles smell of plastic, and you need to get rid of this smell right away. There are many effective methods for removing plastic smell from a new electric kettle.

For such purposes, it is not recommended to use household chemicals. Harmful components contained in their composition may remain on the walls of the device and be absorbed into its body. This means that the liquid poured for boiling will constantly absorb harmful structures. This will lead to unpredictable consequences. Possible allergies, intestinal upset, skin rashes. Therefore, use only proven methods from which you can not expect a catch.

Proven Methods

These methods include folk remedies. They will rid the kettle of the plastic smell, and at the same time preserve the health of those around you. Housewives can offer many proven and effective methods, because the problem of odors has existed for a long time. Traditional methods are being improved, new products are being selected, the properties of which many do not even think about, the ratios of ingredients are being revised, and new formulations are being tried. Thanks to the intensive work of housewives, you can choose those drugs that are always at hand and can bring results.

Boiling water several times

The method is used for a new electric kettle:

Wash the inside of the appliance body with any dishwashing detergent. It's a good idea to take dish soap for children's accessories. They do not contain dyes or pungent aroma;
Fill the vessel with water and boil it;
drain the contents and add fresh water;
re-boil.

Repeat boiling and changing the liquid at least twice. The plastic smell will disappear. Only after this simple procedure boil water in a kettle for use.

Lemon acid

pour a full kettle of water;
add 4-5 packets of citric acid;
turn on the electric kettle; boil the contents;
leave filled for 12 hours;
After a while, bring the poured mixture to a boil again;
drain the lemon mixture and rinse the kettle.

Instead of citric acid packets, you can add the juice of 4 freshly squeezed lemons to the water. The remaining steps are performed in the same way as in the previous case.

Lemon zest

Follow these steps:

Take several lemons and peel the skin of each one.
Fill the second part of the device with zest.
Add water to the top. Boil the mixture.
Turn off the device and leave the mixture for 12 hours.
Then boil the mixture again.
Drain off the remaining liquid, remove the skins and wash the device thoroughly.

Powder is indispensable in everyday life. They can carry out any cleaning work. Baking soda is also used to remove odors from the kettle. The procedure is simple but effective:

Fill the device with water.
Add 3 tbsp. l. soda
Boil the mixture.
Wait half an hour.
Boil the cooled water again.
Drain the water. Wash the kettle under running water.

Vinegar

Algorithm for combating plastic odor with vinegar:

Pour water into the kettle.
Add half a glass of 9% vinegar and 2 tbsp. l. essences.
Heat until almost boiling so that water does not splash out of the spout.
Turn off the device, wait a little, then turn on again.
Repeat the procedure several times.
Rinse the device thoroughly under the tap.

Basic operating rules

To prevent unpleasant odors from appearing in the kettle, follow these simple rules:

Clean the container regularly;
use clean water after filters;
do not boil anything other than water in a container;
If you do not plan to use the kettle for a long time, then rinse it and leave it stored with the lid open.

If you have already purchased a new electric kettle and it has a strong plastic smell, try to get rid of the aroma before you start drinking tea. Drinks that smell like chemicals are unlikely to be enjoyable. As a rule, simple manipulations solve the problem quickly and forever. What to do with the product if technical odors are not eliminated is up to the user: you can return the product to the store or use it for technical purposes.