10 best manufacturers of pumps for wells

Which pump is better to buy for a well?

Selecting a pump for a well must begin directly near the water intake point. This is done to obtain the following data:

Well depth - measured from the surface of the soil to the bottom.
Statistical level - represents the distance from the ground line to the water surface.
Dynamic level - measured after water is pumped out, when the natural inflow into the well becomes equal to the water intake.
Well flow rate is the difference between the statistical and dynamic levels. Allows you to evaluate the power and performance of the pump to eliminate the risk of draining the well.
The height of the water column is the distance from the bottom to the set dynamic level.
Degree of water contamination and operating conditions of the installation. Based on the data obtained, the need for a filter and a hydraulic accumulator is determined.

After this, you can move on to studying the basic technical characteristics of suitable pumps. First of all, this is the productivity of the unit (l/min), which should take into account the flow rate of the well and be approximately equal to the actual water withdrawal.

The geometry of the well will allow you to determine the required immersion depth of the pump and the pressure - the height of the water column at the supply.

There are two types of pumps: surface and submersible. The main parameter for choosing one type or another is the working depth. If it is more than 8 meters, you need a submersible model. For shallow well depths, surface pumps should be purchased.

Recommendations: 12 Best Pumps for Home Heating Systems

15 Best Water Pumps

15 best pumps for wells

Which submersible vibration pump is best?

The most ideal pump that would suit absolutely all tasks does not exist. When choosing, it is necessary to take into account the specifics of the work. “MALISH” BV 0.1-63-U5 is perfect for multifunctional use due to the presence of IPX 8 protection.

However, if it is necessary to equip a pumping system, then you should pay attention to BOSNA TYPHOON-2 BV-0.25-40 U5M. The solution can work painlessly with liquids containing abrasive impurities.

The STURM WP9740T pump looks great in household irrigation systems. The pump effectively copes with the supply of gardens, vegetable gardens and small farms.

The best surface pumps for a well

The maximum column height for lifting water for these units is 10 m. Taking into account the bends and turns of the water supply system, the optimal column height for surface models is reduced to 6-9 m. Almost all modern pumps are equipped with automation, which significantly increases the service life of the equipment.

Gardena 3000/4 Classic Pump Set – reliable and quiet

5.0

★★★★★

editorial assessment

100%

buyers recommend this product

See review▶

The super-compact self-priming pump with a horizontal installation method is equipped with a powerful 600-watt motor and allows you to draw water from a depth of up to 7 m. The performance of the little one is quite good: 3.1 m3/h.

Buyers note the high reliability of the device and good equipment. The box with the pump includes: a hose with a filter and check valve, a 20-meter ½-inch garden hose and the necessary connecting elements.

Advantages:

Compactness.
Low power consumption.
Reliable design.
Low noise level.
Engine thermal protection.

Flaws:

Relatively low power.

Gardena Classic Pump is a good model for organizing water supply for a small suburban area. However, its small power imposes some restrictions on the distance between the points of water intake and consumption. The purchase of this model is justified when the well is located no further than 15 m from the water tap or sprinkler system.

Gilex Jumbo 70/50 P - powerful pump for clean water

4.9

★★★★★

editorial assessment

97%

buyers recommend this product

A surface centrifugal pump with a built-in ejector has a capacity of 4.2 m3/h with a maximum head of 50 m. The engine of this model is equipped with a soft start system and overheating protection. The unit itself can operate as part of a pumping station.

Advantages:

High performance.
Reliability.
Not a bad depth of water rise (9m).
Long warranty from the manufacturer.
Low cost - a little more than 5 thousand rubles.

Flaws:

Noisy.
Short network cable (1.5 m).

Gilex Jumbo 70/50 P is an excellent option for organizing watering of a garden plot.

Metabo P2000G - high-quality and reliable unit

4.8

★★★★★

editorial assessment

94%

buyers recommend this product

The quiet and compact garden pump is equipped with a capacitor motor, which provides a capacity of 2000 l/h at a maximum water supply height of 30 m. Long service life is ensured by the presence of a mechanical seal system and protection of the motor from overheating.

The manufacturer also took care of the ease of putting the device into operation by providing a separate water intake hole. And the price of this device is only 3500 rubles.

Advantages:

Compact sizes.
Economical (power consumption 450 W).
Ability to work as part of a pumping station.
Low noise and vibration levels.
Carrying handle.

Flaws:

There is no protection against dry running.

A surprisingly inexpensive model with more than impressive characteristics.

Hammer NAC 1000A - a budget model with decent characteristics

4.8

★★★★★

editorial assessment

91%

buyers recommend this product

See review▶

A fairly compact circulation pump with a kilowatt motor provides a head of 45 m with a very good performance of 76.5 l/min. The model can be used as independent equipment or as an element of a pumping station.

The unit is equipped with an inlet filter that protects its internal elements from mechanical impurities, and a check valve that prevents the reverse flow of liquid. The manufacturer also took care of the safety of the engine, providing for the presence of thermal protection with automatic activation after reaching the normal temperature regime.

Advantages:

High quality build.
Good performance.
Compact sizes.
Low cost - less than 6 thousand.

Flaws:

There is no protection against dry running.
Short power cord.

The Hammer NAC is an excellent garden pump with an excellent price/quality ratio.

Whirlwind PN 650 – compact pump at an affordable price

4.5

★★★★★

editorial assessment

82%

buyers recommend this product

See review▶

An inexpensive and unpretentious self-priming pump provides a head of 45 m with a maximum productivity of 3300 l/h. The main feature of the model is its high resistance to corrosion due to the use of cast iron in the manufacture of the body.

Advantages:

Good power.
The maximum lifting depth for devices of this class is 9 m.
Low noise level.
Low cost - 3500 rubles.
Overheat protection.

Flaws:

Not the best quality of the support bearing.

The PN whirlwind is suitable for organizing an irrigation system in a garden plot. The main thing is to control the pressure in the system to prevent air from being sucked in from under the seal.

The best pumping stations for a well

Like all surface pump models, these stations are not designed for submersion. Their maximum water supply depth is also small (9-10 m). A special feature of these installations is the presence of a hydraulic accumulator and automation that controls the operation of the station.

Denzel PS 800X - inexpensive but productive station

5.0

★★★★★

editorial assessment

100%

buyers recommend this product

A very compact and economical surface pumping station Denzel PS 800X is specially designed for automatic water supply, irrigation of garden plots and increasing pressure in suburban water supply systems.

Despite its compact dimensions and not very powerful engine, the station is capable of providing a working pressure of 1.5-3 kg/cm2 and a productivity of up to 3200 l/h with a maximum lift height of 38 m. The model is equipped with a 24-liter hydraulic accumulator, which reduces the frequency of engine starts . The cost of this complex is 7400 rubles.

Advantages:

Compactness.
Low noise level.
Economical energy consumption.
Good pressure.
Overheating protection available.

Flaws:

No built-in filter.

An excellent and inexpensive model that easily copes with the uninterrupted supply of water to three points simultaneously.

Metabo HWW 3500/25 Inox - a unit with honest characteristics

4.8

★★★★★

editorial assessment

92%

buyers recommend this product

See review▶

This compact new generation model is specially designed to create an effective water supply system for a country house. The station is based on a reliable pump, which is driven by a silent capacitor electric motor.

Automation allows you to configure the operation of the device depending on the pressure in the system. A capacity of 3500 m3/h is sufficient to uninterruptedly supply 2 water collection points. Such a station costs 8300 rubles.

Advantages:

Good performance.
Good pressure (45 m).
Overload protection.
Economical motor (900 W).
No noise or vibration.
A check valve is included.

Flaws:

No dry running protection.

An excellent model for organizing water supply at a dacha and building a site irrigation system.

DAB E Sybox Mini 3 – compact station with impressive functionality

4.7

★★★★★

editorial assessment

89%

buyers recommend this product

See review▶

Sybox Mini is one of the most compact pumping stations for water supply to private homes and maintaining pressure in private water supply networks. The unit is equipped with a powerful engine and a very efficient pump, providing a throughput of up to 4.8 m3/h with a maximum head of 50 m.

The built-in hydraulic accumulator reduces the risk of water hammer (although when installed in a well, this plus loses its significance). The main feature of the design is the built-in frequency converter, which ensures stable pressure in the water supply system.

Advantages:

High power in compact dimensions.
Possibility of floor and wall installation.
Informative display.
Disabling the self-priming function for use in pressure systems.
Self-diagnosis.

Flaws:

High cost - almost 30 thousand rubles.
Small hydraulic tank volume (1 l).

A universal model with many functions for creating a full-fledged automatic water supply system.

Grundfos Hydrojet JPB 6/60 – high-quality high-power pump

4.6

★★★★★

editorial assessment

87%

buyers recommend this product

Grundfos has made a virtually silent stationary installation with excellent performance. Thanks to a powerful 1.4 kW motor and an improved design of the Hydrojet JPB pump, it is capable of providing a flow rate of 5 m3/h at a head of 48 m. The reliability and high wear resistance of the unit is a merit of the stainless steel that is used in the production of the internal elements of the pump.

Advantages:

Reliability and long service life.
High performance.
High quality build.
Large hydraulic accumulator volume 60 l.

Flaws:

Sensitive to voltage changes.
Noisy work.
High cost - more than 30 thousand.

Grundfos Hydrojet is ideal for creating automatic water supply for a private home and watering a suburban area.

Foreign models

The ranking of the best vibration pumps also includes Italian models. Here it is worth highlighting the units for pumping water from the Quattro Elementi well. The power of products of a given brand may vary. The cheapest options, which are well suited for use in the country, provide up to 1000 liters per hour. Pumps from an Italian company, as a rule, produce good pressure. The price of Quattro Elementi pumps is from 1,500 to 3,000 rubles. In the most expensive models you can find special automatic thermal protection, which allows the unit to switch itself off if it overheats. The disadvantage of such units is that they are only suitable for pumping clean water. Contact with dirt quickly disables them.

Vibration pumps made in Germany are also popular. For example, in many summer cottages you can find devices from the Hammer brand. These are lightweight pumps that do not deliver more than 1000 liters per hour. Despite the fact that such devices are inferior in performance to Russian ones, their price is higher.

When purchasing a vibration pump, you should pay attention to popular products that are widely represented on the local market. The thing is that any unit will eventually require replacement of some components. For rare models it can be very difficult to find spare parts.

The best submersible pumps for a well

As the name suggests, these pumps are designed to be fully or partially submerged in a body of water. Among them there are well and borehole models. Depending on the type chosen, the height of the water column varies from 9 to 200 m. Submersible pumps are characterized by high efficiency (compared to surface models) and the presence of a sealed housing.

They are usually equipped with a filter and automatic dry-running protection. Experts recommend paying attention to the presence of a float, which will turn off the power to the pump when the critical water level is reached.

Pedrollo NKM 2/2 GE – pump for wells with moderate energy consumption

5.0

★★★★★

editorial assessment

100%

buyers recommend this product

A productive and reliable pump that is capable of “digesting” water with minor mechanical inclusions up to 150 grams/1 m3 without harm. With a immersion depth of 20 m, the unit provides up to 70 liters of water, raising it by 45 m. This model can also work stably in networks with voltage drops.

Advantages:

Reliability.
Excellent performance.
Stable operation in contaminated water.
Low power consumption.
The presence of a float switch.

Flaws:

High cost - 29 thousand.

A very good model for organizing water supply for a private home. The main thing when using this pump is to take into account the flow rate of the well.

Water jet PROF 55/50 A DF – for pumping contaminated water

4.9

★★★★★

editorial assessment

97%

buyers recommend this product

See review▶

New this year is a submersible pump with impressive technical characteristics. When diving to a depth of 30 m, this unit is capable of delivering up to 55 l/min. to a height of up to 50 m. Dry running protection is provided by a float switch.

The main feature of the device is the floating design of the impeller. This technical solution allows pumping water with a solid content of up to 2 kg/m3. The cost of the unit is 9500 rubles.

Advantages:

Good performance and pressure.
Overheating protection available.
Ability to work in water with a high content of mechanical impurities.
The presence of drainage channels to reduce the load on the engine at start-up.

Flaws:

No check valve included.

A good model for creating an automated water supply system at home. However, its construction requires additional elements and accessories (hoses, fittings, check valve, etc.) that must be purchased separately.

Karcher SP1 Dirt – silent model with low power consumption

4.8

★★★★★

editorial assessment

90%

buyers recommend this product

See review▶

A reliable submersible pump from a well-known German manufacturer is designed for a maximum productivity of 5.5 m3/h at an immersion depth of up to 7 m. The unit is equipped with a carrying handle, a patented quick connection system, and has the ability to operate in manual and automatic modes with a float switch.

The main feature of Karcher SP is the possibility of stable operation in turbid water with mechanical inclusions up to 2 cm in diameter. At the same time, the price of the device is quite low - 3300 rubles.

Advantages:

High performance.
No noise during operation.
High quality build.
“Digestion” of large mechanical inclusions.
Extended warranty (5 years) from the manufacturer.

Flaws:

The kit does not include an input filter.
Large outlet diameter – 1″.

The extremely low pressure of 4.5 m indicates the narrow specialization of the device. It is suitable for watering the site, draining drainage wells and swimming pools.

Specifications

The well vibration pump is very popular among summer residents and owners of private houses. It is highly rated for its convenience, simplicity and versatility. If you choose the unit correctly, taking into account its technical characteristics, and then use it according to the instructions without overloading, the device will last a long time and will not require repair or replacement.

In a private home or country house, a vibration pump can solve a lot of problems. It is suitable for continuous water supply in houses without a central water supply and pumping water during constant interruptions in the water supply system. A similar device can be used in a well, a pond, or a shallow well. The unit can be useful for providing water not only to a living space, but also to a garden. The same ones are used to fill the heating system. In addition, a vibration pump can also play the role of a drainage device if it is necessary to pump out water from flooded areas, basements, etc.

But in order for the pump to perform its functions well and work for a long time, it must be operated in accordance with the technical specifications. If the device is constantly overloaded, it will quickly fail.

For example, if you install a 200-watt pump, it will clearly not be enough to supply liquid to a multi-room cottage with several bathrooms and a swimming pool. However, if we are talking about a small country house with 2 rooms with a kitchen and a bathroom, then such equipment will easily cope with the task.

When purchasing a vibration pump, you need to clarify its characteristics in terms of supplying the number of liters per minute. If you buy the cheapest unit, it is unlikely to be able to produce a pressure of more than 10 liters per minute, and there will be no water in the kitchen when watering the garden.

In the technical data sheet for the device you can always find information about the optimal depth for which the vibration pump is designed. The optimal option is 7 meters. In addition, you can see information about the diameter of the pipe. This is a very important point for those who are going to use a pump to take water from a well or pump out liquid from narrow spaces. Dimensions can be from 75 to 105 mm.

But the most important technical characteristic that experts recommend paying attention to is performance. The main thing is that the unit can withstand the load to which it will be subjected during operation. It should be borne in mind that the price of the device and the additional costs of servicing the pump depend on the power and performance.

There are 3 load categories in total. For small country houses and watering the garden, the simplest units are sufficient - up to 700 liters per hour. The average load is considered to be a fluid supply of 700 to 1500 liters per hour. But there are also vibration pumps that deliver 2000 liters or more. These are already units for large wells, they are enough for multi-room houses.

Before you make a purchase, you need to calculate the pressure and level of water rise. The operation of many devices that are associated with the supply of liquid, for example, washing machines and water heating elements, depends on this. The closer the water source is to the tap, the better the pressure.

It is advisable to pay attention to such a point as thermal protection. Experts recommend choosing units with automatic shutdown in case of overheating. Such equipment is the Russian-made vibration pump “Malysh”. When purchasing a device, you need to pay attention to the cable. It must be well insulated so that it can work even at low temperatures.