TOP 10 best heating radiators for a home or apartment

Rating of the TOP 15 best aluminum radiators of 2021

Rating of the TOP 17 best heating radiators of 2021

How to choose and what to pay attention to?

Many companies are engaged in the production of heating devices from aluminum, but when choosing a device you should pay attention not to the brand, but to the technical characteristics of the product.

The following recommendations will help you choose a high-quality aluminum battery::

1. In terms of design, it is better to give preference to a cast radiator . It withstands pressure changes in the system much better and can work in any conditions.
2. You should also pay attention to the internal coating of the product . Reliable manufacturers treat the inside of the radiator with a special compound that forms an oxide film on the surface and protects the device from corrosion.
3. It is advisable to buy the radiator assembled and with the required number of sections - since factory twisting is usually more reliable than doing it yourself.
4. It is better to give preference to European manufacturers . Their devices are of high quality, and no toxic compounds are used for production. Chinese devices do not have such guarantees.

It is also advisable to purchase the device in a specialized heating equipment store, and not on the market..

This way the buyer will be protected from buying a fake.

The best aluminum radiators for a private home in terms of price/quality ratio

Aluminum radiators can be installed both in high-rise buildings and in private houses. For individual heating systems, you can choose a high-quality and relatively inexpensive device.

Royal Thermo Revolution 500

Sectional aluminum radiator designed for wall mounting . The connection to the heating system is lateral, there are no difficulties with installing the device.

The radiator is made of cast aluminum, so it can withstand water hammer and sudden pressure surges within 30 bar.

Depending on the model, the device can consist of 1-22 sections, but it is better to immediately buy an assembled radiator, focusing on the area of ​​the room.

The installation kit is not provided with the heater, so all additional elements required for installation will have to be purchased separately.

Specifications:

• heat output 181-3982 W;
• operating temperature 110 degrees;
• maximum operating pressure 20 bar;
• weight 1.2-26.4 kg;
• section dimensions (W/H/T) 80x570x80 mm.

pros

• increased strength of the plug;
• light weight;
• stylish design;
• very good heat dissipation;
• The wave-like shape of the fins ensures good circulation of heated air.

Minuses

• Poor quality painting of the rear part of the case;
• Installation kit not included.

ROMMER Profi AL 350

Externally simple but functional aluminum radiator, which is suitable for individual heating systems.

The device is compact and has a laconic design, so it will fit harmoniously into any interior.

The sectional design of the radiator allows you to select a model based on the area of ​​the room.

The product is entirely made of aluminum, and high-quality internal coating and external painting prevent rust and leakage..

The maximum operating pressure is 16 bar, but the device can withstand pressure surges up to 24 bar.

The connection is lateral, but the installation kit is not provided with the radiator, so the necessary parts for installing the radiator will have to be purchased separately.

Specifications:

• power 135-2700 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 0.8-16 kg;
• section dimensions (W/H/T) 80x428x80 mm.

pros

• affordable price;
• attractive appearance;
• the number of sections can be changed individually, depending on the area of ​​the room;
• reliable protection against rust and leaks;
• low weight makes transportation and installation easy.

Minuses

• provided without installation kit;
• Suitable only for individual heating systems.

Oasis AI 500/96

Lightweight and functional radiator is designed for installation in private houses or apartments with an individual heating system.

The body is made of aluminum, and high-quality painting and a special internal coating prevent the formation of rust.

The operating pressure of the battery is 16 bar, but, due to its thoughtful design and high-quality materials, the heater successfully withstands pressure surges up to 24 bar without loss of performance characteristics.

Users positively evaluate the high heat output of the device.

Additionally, the housing has a rotary regulator that allows you to adjust the room temperature with one movement.

Specifications:

• operating temperature 110 degrees;
• number of sections 4-12;
• power 532-1596 W;
• weight 3.4-10.2 kg;
• section dimensions 75x560x96 mm.

pros

• discreet design;
• high quality of materials and workmanship;
• affordable price;
• low weight facilitates installation and transportation;
• high-quality painting of the body.

Minuses

• provided without installation kit;
• dimensional model, in comparison with analogues.

Royal Thermo Revolution 500 x 8

A high-quality aluminum radiator with a standard number of sections is ideal for heating medium-sized residential premises.

The body is made using casting technology from high-quality aluminum. A special internal coating prevents the formation of rust, and a thick layer of paint on the outside of the device ensures long-term operation and protection against leaks.

The radiator can be installed in private houses with individual heating, and in high-rise buildings connected to a central heating system.

The design of the device is capable of withstanding an operating pressure of 20 bar and sudden pressure surges within 30 bar.

Specifications:

• power 1368 W;
• number of sections 8;
• operating temperature 110 degrees;
• weight 9.6 kg;
• section dimensions (W/H/T) 80x570x80 mm.

pros

• affordable price;
• wavy fins ensure uniform distribution of heated air throughout the room;
• high resistance to mechanical damage;
• the paint does not turn yellow or crack when exposed to high temperatures;
• There is a heating regulator on the body.

Minuses

• The kit does not include an installation kit;
• provided with a fixed number of sections.

Royal Thermo Indigo 500

The radiator of a famous European brand is distinguished by high quality workmanship and thoughtful design.

The device is of a sectional type, so the number of elements can be increased individually, focusing on the area of ​​the room.

The aluminum body is reliably protected from rust, thanks to a special internal coating and high-quality painting on the outside.

The device is recommended for installation in private houses with an individual heating system.

But the radiator is able to withstand operating pressure of 20 bar and surges of up to 30 bar, so it can also be installed in apartment buildings with a centralized heating system.

Specifications:

• heat output 195-2730 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.35-18.9 kg;
• section dimensions (W/H/T) 80x585x100 mm.

pros

• affordable price;
• reliable European manufacturer;
• high quality of materials and workmanship;
• there is a temperature regulator on the case;
• resistance to pressure surges and water hammer.

Minuses

• no mounting kit included;
• large dimensions in comparison with analogues.

Bimetallic products

Sira RS Bimetal 500

Very reliable products, characterized by an original design. Such radiators can withstand pressure up to 40 atmospheres. They are made on the basis of reliable steel alloys that are not subject to corrosion processes. The outer shell is made of aluminum, which is quite predictable. Heat transfer can reach 200 W if the coolant temperature is 70 degrees. This ensures high production efficiency even with a small number of sections. Radiators are characterized by not too large overall dimensions and are available in several versions, which allows them to be installed in both spacious and small apartments. The design is very interesting - the profile is rounded, the edges are processed. The paint is durable and can withstand significant temperature changes and other physical stress. In most cases they are used without decorative screens.

It is allowed to use these devices in both two- and one-pipe systems, regardless of the type of building. In other words, they are suitable for both apartment buildings and private residential buildings. They can be installed in liquid and steam systems. The vertical channel here is made of steel, which allows not only to increase heat transfer, but also to make the device more reliable.

More: Top 10 best sealants for the bathroom, how to choose the right sealant

Advantages:

• Very easy to install;
• During operation they do not emit any extraneous sounds;
• High level of paint quality;
• Sealed products;
• The original design allows the use of radiators without decorative screens.

Flaws:

• High sensitivity to the composition of the coolant - it is undesirable to use antifreeze as it.

Sira RS Bimetal 500

Rifar Monolit 500

This model of domestic production is rightfully considered one of the best not only in our country, but also in all European countries. The product turned out to be completely sealed. The collector is monolithic, the body is one-piece. This heating equipment can withstand significant pressure well and does not rust either outside or inside. The radiator can be used even in quite difficult conditions. The center distance is 350 or 500 mm depending on the modification. The first type is used for houses or apartments, while the second is intended more for large premises such as factory floors or shopping centers. In terms of its operating parameters and workmanship, the product significantly exceeds its European analogues. The radiator is capable of working even with low-quality coolants.

The thermal power of the unit is very high - it will be quite enough to qualitatively warm the air even in a poorly insulated room even in fairly severe frost. The structure is one-piece, welded, and the welds are absolutely invisible. The sections here are not disassembled, which helps prevent leaks and increase the reliability of the heating device. During manufacture, the unit is tested under pressure and the highest loads.

Advantages:

• Excellent reliability;
• Reasonable cost;
• Very beautiful appearance;
• Not subject to corrosion;
• Can work even with low-quality coolants;
• Long service life.

Flaws:

• Not detected.

Rifar Monolit 500

Global STYLE PLUS 500

The company that produces these products has been on the heating equipment market for more than 30 years. These radiators are perfect for central heating systems because they can easily cope with low-quality coolant and can withstand significant water hammer. They can also be used in individual heating systems. This is one of the few models with a depth of 95 cm, which can significantly increase heat transfer rates. The increased level of product durability goes well with an attractive appearance that will optimally fit into any interior design. Radiators can withstand pressure up to 35 atmospheres, which helps to cope with even very strong water hammer. The safety margin is very high.

The internal surface is entirely made of steel, which makes the radiator resistant to pH. Only high-quality materials are used in production, which fully comply with Russian and international requirements. Internal and external surfaces undergo careful processing at the production stage, which gives the structure an attractive appearance and also facilitates the passage of coolant during active operation of the system.

Read in detail about the Global Style Plus heating radiator and buy from the manufacturer at the best price!

Advantages:

• Long warranty period - it is as much as 25 years;
• The maximum operating temperature of the coolant is 110 degrees;
• The internal channels are thoroughly processed, so there will be no difficulties in the passage of coolant;
• Can withstand pressure of 35 atmospheres.

Flaws:

• Relatively high cost.

Global STYLE PLUS 500

How are Global Radiatori heating radiators produced?

The best aluminum radiators with side connections

The side connection of the radiator is standard for many apartments and houses, so many models have exactly this design. The choice of heating devices with side connections is wide, but there are models that stand out among the rest.

ROMMER AI Plus 200

This model of aluminum radiator is suitable for those who value quality, compactness and functionality..

The device is intended for wall mounting and lateral connection to the heating system.

But the design features suggest the use of a radiator only with individual, and not centralized heating systems.

The operating pressure of the device is 14 bar, but a short-term increase in this indicator to 21 bar is allowed.

The number of sections can be selected individually, depending on the area of ​​the room, but it is better to immediately buy a ready-made device with a certain number of sections, since the factory connection is more reliable than a manual one.

Specifications:

• operating temperature 110 degrees;
• power 120-2400 W;
• number of sections 1-20;
• weight 0.6-13.4 kg;
• section dimensions (W/H/T) 80x276x96 mm.

pros

• compact dimensions;
• affordable price;
• high heat transfer;
• low weight facilitates transportation and installation;
• The optimum ratio of price and quality.

Minuses

• not suitable for apartment buildings;
• not very high quality painting.

Royal Thermo Revolution 350

The radiator of a famous European brand has a discreet design and thoughtful design.

Combined with its affordable price and functionality, this makes the device one of the best for installation in private houses and apartments in multi-storey buildings.

The device body is made of high-quality aluminum, and a special internal coating protects the device from corrosion.

The outside of the radiator is painted with heat-resistant paint, which does not turn yellow or crack when exposed to high temperatures.

On the side of the case there is a convenient rotary regulator that allows you to adjust the room temperature.

Specifications:

• heat output 141-1974 W;
• working pressure 20 bar;
• operating temperature 110 degrees;
• weight 1-14.1 kg;
• dimensions (W/H/T) 80x420x80 mm.

pros

• high quality of materials and workmanship;
• universal use: suitable for both apartments and private houses;
• durable aluminum housing with high heat dissipation;
• there is protection against water hammer;
• high-quality external coating.

Minuses

• no mounting kit included;
• not suitable for low window sills.

Royal Thermo DreamLiner 500

Stylish aluminum radiator has an original design and excellent performance characteristics.

The device is designed for side connection, so there are no problems with installing the radiator. But keep in mind that the installation kit is not included, so brackets and other necessary accessories will have to be purchased separately.

The design of the heating device allows it to be connected to individual and centralized heating systems.

The operating pressure is 20 bar, but the high quality of the assembly ensures reliable protection of the device from water hammer and pressure surges within 30 bar.

Specifications:

• heat output 113-1592 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.3-18.3 kg;
• section dimensions (W/H/T) 80x580x87 mm.

pros

• universal design;
• high-quality assembly;
• water hammer protection;
• light weight;
• Compact dimensions allow you to install the radiator under a low window sill.

Minuses

• no mounting kit included;
• Some users encounter a manufacturing defect.

Rifar Alum 500

An easy-to-use and reliable domestically produced aluminum radiator is specially adapted for installation in multi-storey buildings.

The durable aluminum case is painted on the outside with heat-resistant paint, and inside is treated with a special anti-corrosion compound.

Combined with a robust design, this allows the device to withstand operating pressures of 20 bar, as well as water hammer and short-term pressure increases of up to 30 bar.

The lightweight body and compact dimensions make the device easy to transport and install.

But you need to keep in mind that the installation kit is not included, so you will have to buy brackets and other accessories additionally.

Specifications:

• heat output 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

pros

• reliable domestic manufacturer;
• there is protection against water hammer;
• convenient temperature regulator on the case;
• high-quality protection against rust and leaks;
• high heat transfer.

Minuses

• high cost in comparison with analogues;
• no mounting kit included.

Global VOX R 500

Sectional aluminum radiator designed for wall mounting and side connection.

The design of the heating device is ascetic and discreet, so the device will fit harmoniously into any interior.

The body is made of high-quality aluminum, and the inside is coated with a special composition that prevents corrosion.

The heating device is more suitable for private houses or apartments with individual heating, since the operating pressure of 16 bar is not enough to connect to the central heating system.

Moreover, the device is able to withstand water hammer and short-term pressure surges of up to 24 bar.

The outside of the case is painted with heat-resistant paint, and is equipped with a convenient rotary regulator that allows you to adjust the room temperature.

Specifications:

• heat output 127-2540 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 1.4-29 kg;
• section dimensions (W/H/T) 80x590x95 mm.

pros

• the number of sections can be adjusted individually, depending on the area of ​​the room;
• stylish design;
• high-quality materials and assembly;
• water hammer protection;
• does not leak or rust even after long-term use.

Minuses

• high price;
• not always on sale.

Aluminum radiators

Thermal RAP-500

Another domestically produced model. Despite the low cost, these products have proven themselves when working even in the most difficult conditions. In many respects, these radiators are superior to their foreign counterparts. These heating devices are designed for a wide range of users - they can be used in high-rise and low-rise buildings, regardless of the characteristics of the heating system. The depth is small - only 52 mm, so the radiator will take up practically no free space. It is well suited for small apartments, and due to its original design it is practically invisible. The products fully comply with international quality requirements.

Radiators are made from the most reliable aluminum, which is not subject to corrosion processes. The outer surface looks mirror-smooth - it is painted with glossy enamel, which is a powder paint. Over time, the color of the radiator does not change because the surface is well protected from direct exposure to ultraviolet rays. It uses original leakage protection, which consists of two levels. The average service life of the device exceeds 20 years, regardless of the type of room. The radiator can easily withstand even severe physical loads, does not deform, maintaining its original shape throughout the entire period of operation.

More: Top 10 best wood glues, how to choose wood glue?!

Advantages:

• High level of heat transfer;
• Reasonable cost;
• Attractive appearance;
• Occupies a minimum of free space in the room;
• Can be used in both residential and industrial premises;
• Reliable protection against leaks.

Flaws:

• The narrow tubes of the sections can periodically become clogged.

Thermal RAP-500

Rifar Alum 500

It has a very original appearance, is produced using original and patented technology, thanks to which not only water or water vapor, but also oil and even antifreeze can be used as a coolant in these radiators. The main distinguishing point here is the oval-shaped vertical channel, and the thickness of its walls is 2.8 mm. This allows the product to cope with high pressure - about 20 atmospheres. Radiators will not wear out much even if liquid passes through them at significant speed. The inner surface is coated with special compounds, which prevents the formation of lime deposits. The warranty period is 10 years.

The connection technology is standard - lateral, so installation is quite simple. It is allowed to install radiators of this type in residential, industrial, office, and commercial premises. The products are distinguished by a high level of strength, as well as optimal convection characteristics. The radiators are cast, which makes it possible to prevent leaks throughout their entire service life. In the lower part there is a special technological hole designed to remove possible contaminants. It is closed with a special plug and sealing gasket. It is allowed to use such a radiator at coolant temperatures up to 135 degrees. The stated service life is 25 years, and in fact it will be much longer.

Advantages:

• Increased level of heat transfer;
• Sufficiently thick radiator walls;
• There is a hole for removing dirt;
• Can work with a wide variety of coolants;
• Attractive appearance;
• Reasonable price.

Flaws:

• The sections have sharp corners;
• May not be painted between sections.

Rifar Alum 500

Aluminum radiator Global VOX R 500

They are characterized by minimal inertia and fairly high heat transfer, so to heat the room you will need to install significantly fewer sections. This radiator mounts well with pipes made of steel, plastic, metal-plastic and other materials. The manufacturer recommends installing the product in systems where the acidity of the coolant is less than pH 8.5. The optimal room temperature is created in the shortest possible time. A temperature-regulating tap can be installed on the radiator to prevent the room from becoming excessively hot. The design weighs little, so it is easy to install and connect - this work can be done even alone.

The design of the radiator was developed taking into account the characteristics of domestic heating systems, so the engineers decided to make it reinforced. The radiator can withstand up to 48 atmospheres, but the maximum recommended operating pressure should not exceed 16 atmospheres. The products are made from certified aluminum, safe for humans, and a two-stage painting technology is used.

Advantages:

• During operation they do not cause any problems;
• They are durable;
• Attractive appearance;
• Quite acceptable power.

Flaws:

• It is significantly more expensive compared to other heating radiators.

Aluminum radiator Global VOX R 500

The best aluminum radiators with bottom connection

Not all houses have bottom connections for radiators, but the choice of heating devices with this function is quite wide. Most users prefer domestic devices.

Rifar Alum Ventil 500

Compact, inexpensive, but reliable aluminum radiator, adapted for use with domestic heating systems.

Since the body is entirely made of aluminum, the weight of the radiator is light, which makes transportation and installation easier.

The outer part of the case has a special protective coating against rust . The top of the device is completely covered with heat-resistant paint, which does not crack or turn yellow even after several years of use.

The radiator is a sectional device, so the number of sections can be selected individually, based on the area of ​​the room.

The operating pressure of the device is 20 bar, so it can be connected to both individual and central heating systems.

Specifications:

• heat output 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

pros

• resistance to water hammer;
• withstands pressure surges up to 30 bar;
• stylish design;
• compact dimensions;
• suitable for private houses and apartments.

Minuses

• no mounting kit included;
• Some users complain about the poor quality of the paint on the back of the case.

Rifar Alum Ventil 350

The domestic radiator is characterized by ease of operation, reliability and thoughtful design.

The durable and lightweight aluminum body is coated with a special anti-corrosion compound, so failure of the device or leakage is excluded.

There is a regulator on the side of the case, with which the user can independently adjust the room temperature.

The design of the device is universal, and the convenient bottom connection allows you to mount the radiator even under a low window sill.

High heat transfer and optimal distribution of hot air ensure long-term temperature retention and rapid heating of the room.

Specifications:

• heat output 153-2448 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.2-19.2 kg;
• section dimensions (W/H/T) 80x415x90 mm.

pros

• affordable price;
• compact dimensions;
• withstands pressure surges up to 30 bar;
• low weight facilitates transportation and installation;
• the number of sections can be selected individually.

Minuses

• fasteners for installation must be purchased separately;
• Some users do not like the quality of the temperature controller.

Rifar Alum Ventil 500 x 5

A functional and well-thought-out model of an aluminum radiator with 5 sections . High heat transfer and operating temperature ensure quick heating of the room, but the limited number of sections allows the device to be installed only in small and medium-sized rooms.

The durable housing made of high-quality aluminum successfully withstands water hammer and pressure surges up to 30 bar.

The inside of the housing is coated with a special chemical composition that prevents corrosion and guarantees protection against leaks.

Users also positively evaluate the design of the device, which makes the radiator suitable for installation in residential, office and other premises.

Specifications:

• heat output 915 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 7.2 kg;
• dimensions (W/H/T) 80x400x90 mm.

pros

• reliable protection against corrosion;
• convenient temperature regulator on the case;
• high heat transfer;
• affordable price;
• protection against water hammer and pressure surges.

Minuses

• Poor quality painting of the rear part of the case;
• Suitable for bottom connection only.

Rifar Alum Ventil 350 x 13

A powerful and functional radiator that can be used to heat even large rooms.

The product is made of lightweight but durable aluminum. The inside of the case is coated with a protective compound that prevents the formation of rust and leakage of the device.

Additionally, a rotary regulator is provided on the case, which allows the user to independently adjust the room temperature.

The outer layer of paint is very durable, so it does not crack or turn yellow when exposed to high temperatures.

The operating pressure of the device is 20 bar, but the housing itself is capable of withstanding water hammer and pressure surges of up to 30 bar.

Specifications:

• heat output 1989 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 15.6 kg;
• dimensions (W/H/T) 80x1040x90 mm.

pros

• reliable domestic manufacturer;
• affordable price;
• water hammer protection;
• does not leak or rust;
• stylish design.

Minuses

• no mounting kit included;
• the number of sections is standard and cannot be adjusted.

Rifar Alum Ventil 350 x 11

Functional and easy-to-use aluminum radiator with a standard number of sections.

11 heating elements are enough to heat and maintain optimal temperature even in large rooms.

Another advantage of the device is that the mounting kit is included, so the user does not have to additionally purchase brackets and other fasteners.

The lightweight but durable aluminum body has a protective coating against rust and is resistant to water hammer, so if the pressure level in the system rises to 30 bar, the device will not fail.

Specifications:

• heat output 1683 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 13.2 kg;
• dimensions (W/H/T) 80x880x90 mm.

pros

• reliable domestic manufacturer;
• protection against corrosion and leaks;
• adapted for use with domestic heating systems;
• affordable price;
• stylish design.

Minuses

• standard number of sections;
• Suitable for bottom connection only.

Products made from steel and its alloys

Purmo Compact 22 500

This is a panel-type radiator, equipped with profiled heating panels, as well as elements that provide convection. It also comes complete with side pads and a grill-style top pad. The radiator itself has four holes for connecting to the heating system. They are equipped with a standard thread, so it can be built in on both the right and left sides. The model is produced taking into account all international requirements for these products. At all stages of production, the radiator goes through several quality checks, including being repeatedly pressurized under pressure that is several times higher than the working one. All low-quality products are rejected at this stage, and only the most reliable and durable heating devices reach consumers.

All included pads help prevent burns during operation of the heating element. It is worth noting that its strength is significantly higher compared to aluminum and bimetallic radiators, which allows it to be used even in high-rise buildings, where the coolant pressure is often very high. It is painted with high-strength powder compositions, so the paint layer remains in its original form throughout its entire service life. The paint does not deteriorate under the influence of temperature changes and other physical stress.

Advantages:

• Quite reasonable cost;
• Attractive appearance;
• Absolute safety of operation;
• Increased level of strength;
• Long service life;
• Can work with any coolant.

Flaws:

• Heat transfer is significantly lower compared to aluminum and bimetallic products.

Purmo Compact 22 500

Buderus Logatrend K-Profil 22 500

Made in a traditional format, it can be used in residential, industrial and other premises. The design is quite modern, so the radiator will fit well into any interior. Ideal not only for new heating systems, but also for replacing batteries that have failed. The device consists of two panels through which the coolant passes, and there are also two convectors. The structure is covered with a grill on top, and there are walls on the sides that prevent you from getting burned if touched accidentally. The parts are connected to each other using roller welding - this is a very original approach of the manufacturer, since most similar radiators are made using spot welding, the strength of which leaves much to be desired.

More: Top 10 best gas and gas-wood stoves for saunas

The product can be connected to a thermostatic head, which will regulate the temperature of the radiator. After painting, the structure is dried with hot air, which significantly increases the resistance of the coating to impacts, scratches and other physical influences. Can be installed on either side. In production, steel elements are used, the thickness of which is 1.2 mm. The warranty period is 5 years with a declared service life of about 25 years. The manufacturer clarifies that these batteries are not suitable for rooms with an aggressive or damp environment, but they can be installed in bathrooms - you just need to comply with one condition: the distance from the source of splashing water must be at least 60 cm.

Advantages:

• Very high quality paint layer;
• Reasonable cost of the radiator;
• Domestic products;
• Can be mounted on either side to the wall;
• Insignificant mass.

Flaws:

• The top of the bracket seems a little flimsy.

Buderus Logatrend K-Profil 22 500

Kermi FKO 11 500

One of the most budget radiators presented on the Russian market. Moreover, the battery is of excellent quality. Even despite the low price, the products are characterized by fairly good energy efficiency indicators. One design will be quite enough to create a comfortable environment in a room with an area of ​​35 sq.m. With the longest panel length, a little more than 8 liters of coolant fits into it. The battery reaches optimal operating parameters only when it is completely full. Peak operating pressure reaches 10 atmospheres, but the radiator can withstand up to 45 atmospheres. These indicators are quite enough for the product to withstand strong water hammer. There is only one heating panel here - it is through it that the coolant circulates.

There is also a convection element located on the back of the product, which significantly increases heat transfer. It is connected to the heating system from the end sides - there are 4 holes that allow for different operating principles. On the back side there are welded plates used for installation. The overall dimensions are compact - the radiator is only 61 mm deep, so you can install the battery in rooms where it is necessary to ensure a minimum distance from the wall.

Advantages:

• Excellent heating of room air - heating costs can be greatly reduced;
• Slight inertia;
• Radiators can withstand even very strong water hammer, so they are allowed to be used in high-rise buildings;
• Occupy a minimum of free space;
• High quality workmanship.

Flaws:

• They are not very convenient to wash;
• Very sensitive to the quality of the coolant.

Kermi FKO 11 500

Types of aluminum radiators and their brief description

There are three types of aluminum radiators in total.

They differ in manufacturing technology and have some features:

1. Cast . Such batteries are manufactured using injection molding technology. As a rule, an alloy of aluminum and silicon is used for production. Thanks to this, the products are characterized by increased strength, corrosion resistance and excellent heat transfer.
2. Extrusion . Sections of such radiators are extruded using an extruder under pressure and then connected by welding. Some manufacturers, in order to save money, use composite glue for this purpose. In any case, the likelihood of such a radiator leaking is much higher than that of a cast one.
3. Anodized . This is the most expensive type of radiator. For production, special highly purified aluminum with anodic oxidation is used. Due to this, the structure of the metal itself changes and its resistance to corrosion increases. However, due to the high cost, this type of aluminum radiators is practically not used in everyday life.

Advantages and disadvantages of aluminum radiators

The increased demand for aluminum radiators is explained by their numerous advantages.

The advantages of such heating devices include:

• Ability to withstand high pressure and water hammer . On average, an aluminum radiator is designed for a pressure of 20 bar, but most models can withstand short-term pressure surges of up to 30 bar. Due to this, such batteries are suitable for installation in apartment buildings.
• The high level of heat transfer from aluminum contributes to rapid and uniform heating of the room . In addition, a special regulator is installed on the radiators themselves, which allows you to adjust the temperature.
• The low weight of aluminum batteries makes them easier to transport and install . Also, such products have a stylish design and fit harmoniously into any interior.
• Aluminum radiators are presented in a huge range of standard sizes . This allows you to choose a model that is suitable in size and number of sections.

But we must not forget about the disadvantages.

First of all, the maximum operating temperature of aluminum batteries is 110 degrees, so this indicator must be taken into account before connecting to the system.

In addition, aluminum corrodes easily . And, if the manufacturer has saved on the internal treatment of the radiator, it is unlikely that leaks will be avoided.

The best radiator heating systems for apartments

"Global STYLE PLUS 500"

The product from the Italian company is sold in stores with a ten-year warranty from the manufacturer, which already proves the high quality of workmanship. It features a high level of heat transfer, as each section is made of a steel core and an outer layer of aluminum. Withstands pressure up to 35 atmospheres, so the heating battery can be safely installed in an apartment in a multi-storey building. The design of the internal cavities of the radiator eliminates the formation of air locks, which also protects against water hammer.

Advantages of the model:

• Cute design;
• Efficient level of rapid heat transfer;
• Italian quality;
• Resistant to water hammer.

Identified deficiencies:

• Poor heating at low coolant temperatures;
• Quite a high price.

"Rifar Monolit 500"

The bimetallic model, made of aluminum and steel, made it into our rating due to its amazing durability and reliability. The unique design of the product practically does not allow the possibility of leaks, and the excessive resistance to a maximum pressure of 100 atmospheres allows you not to worry about water hammer. Another plus is the unpretentiousness to the quality of the coolant liquid used in the central heating system.

Advantages of the model:

• Reliability and wear resistance;
• Minimal risk of leaks;
• Not bad appearance;
• Resistance to water hammer;
• No sharp corners.

Identified deficiencies:

• Sold in pairs only;
• Price.

"Sira RS Bimetal 500"

The heating battery is also made of steel and aluminum, which helps to significantly increase the speed of heat transfer. Capable of operating at an internal pressure of 40 atmospheres, which is more than enough to connect to the central heating system. In addition to apartments, it can also be used in offices, as it provides for the simultaneous use of 20 sections.

Advantages of the model:

• Workmanship;
• High level of resistance to water hammer;
• Attractive design;
• High heat dissipation.

Identified deficiencies:

• High price.

"MZOO MS-140M-500"

An indestructible Soviet classic: a model for those who are experiencing financial difficulties or want to save money on the purchase of radiator heating systems. It warms up slowly, but also cools down slowly. Manufactured in Belarus, the manufacturer provides a modest three-year warranty, but this battery will last significantly longer.

Advantages of the model:

• Unpretentiousness;
• Resistance to water hammer;
• Good heat dissipation;
• Minimum cost.

Identified deficiencies:

• Dimensions and weight;
• Unpresentable appearance.

"Viadrus Styl 500/130"

A more expensive version of a cast iron radiator heating system with an attractive appearance and good performance characteristics. Made in the Czech Republic, workmanship is above average. Suitable for installation in low-rise buildings; it is not recommended for installation in high-rise buildings due to low resistance to changes in internal pressure: the battery is designed for an average operating pressure of 12 atmospheres, the stability threshold according to the data sheet is 18 bar.

Advantages of the model:

• Good heat dissipation;
• Reliability;
• Workmanship;
• Low price;
• Unpretentiousness to the quality of the heat transfer fluid used.

Identified deficiencies:

• Weak resistance to water hammer;

Which company should you choose?

Many companies are engaged in the production of aluminum radiators, but the leaders are traditionally considered:

1. Italy . Well-known companies Sira, Ferroli and Global produce stylish products with high-quality heat-resistant coating that reliably protects devices from corrosion. Radiators of these brands can withstand pressure changes well, but are expensive.
2. Russia . Rifar is considered the leader among domestic radiator manufacturers. Some brand models copy Global products in design and technical characteristics. Such radiators cost less than Italian ones, but they are much better adapted for connection to domestic heating systems.
3. China . The most famous Chinese manufacturers of aluminum radiators are Bilux and Konner. Such products are inexpensive and of high quality, but in order not to buy a defective or counterfeit product, you need to buy a radiator only in a specialized store, having first studied its technical data sheet.

Steel, copper or aluminum – what to choose?

It is difficult to unequivocally answer the question of which radiator is better, since each device made of a certain metal has its own characteristics, pros and cons.

An objective assessment of radiators made of a certain type of metal will help you make the right choice:

• Steel devices are more suitable for individual rather than centralized heating systems . Such radiators are cheaper than aluminum ones, have good heat transfer and are resistant to corrosion. But steel is considered a relatively brittle metal and is not able to withstand water hammer when the pressure increases to a level greater than 25 bar.
• Copper radiators have excellent performance characteristics . Copper has high thermal conductivity, so such a battery will warm the room 2 times faster than aluminum. In addition, the device is resistant to corrosion and water hammer, but the cost of copper radiators is very high, so many users bypass them.
• Aluminum devices have all the necessary characteristics for long-term operation . But in order for the battery to warm the room well and not leak, you need to buy products from trusted manufacturers.

Aluminum or bimetallic – which one to choose?

There are also bimetallic radiators on the market. They cost more than aluminum ones, but are considered the most modern type of heating device.

In bimetallic radiators, the body is made of aluminum and the interior is made of stainless steel.

Due to this, the device is characterized by increased resistance to corrosion and provides quick heating of the room.

In general, the performance characteristics of bimetallic and aluminum radiators are similar, and the only difference between them is the price.

If your budget allows, it is better to buy a bimetallic radiator, and if finances are limited, you can install an aluminum one, but it must be of very high quality.

Rating updated September 12, 2021.