Size is one of the most important parameters when choosing household appliances. When buying refrigeration equipment for your home, you need to take into account the square footage of the room, the composition of the family, food habits that affect the ratio of the volumes of the refrigerator and freezer compartments, the intended installation location, and even the height of the people living in the apartment.

Depending on these factors, the consumer can choose:

• single-chamber model without freezer compartment;
• two-chamber model with bottom or top freezer;
• a large Side-by-Side unit with three, four, five compartments (with a side-mounted freezer);
• French Door type model (with two doors in the refrigerator compartment and one or two doors or drawers in the freezer, which is located below);
• freestanding or built-in refrigerator

The catalog of the Hausdorf online store contains models of all listed types, both free-standing and built-in. The choice of built-in equipment also imposes restrictions on its characteristics.

Standard sizes

To make it easier for the buyer to navigate all the diversity, the sizes of the most popular devices were standardized in three dimensions, as well as in total volume. For Europe and Asia, these standards may differ, since the design differs:

• European type - bottom location of the freezer, small width and depth with a significant height;
• Asian type - upper location of the freezer, lower height, increased width and depth compared to European ones;
• American type - all overall dimensions are quite large, and the freezer is located at the bottom or side.

In Russia, they traditionally prefer the European standard with the following parameters: - width - 55-65 cm, - depth - 60 cm, - height - from 85 to 200 cm, - volume - from 30 to 800 liters.

Within this standard, different categories are distinguished, most often by height.

Installation rules for built-in Samsung refrigerators

When purchasing built-in equipment, you need to consider its location. The installation technology directly depends on the size of the device that will be hidden in the furniture set. Samsung appliances are multifunctional. It is intended not only for home use, but also for installation in work establishments, such as offices or shopping centers.

Successful installation of built-in equipment requires that its dimensions match the furniture cabinet.

This can be done in two ways:

• hide the refrigerator in a niche and leave its front part open;
• hide the refrigerator body in a prepared niche and close the door with a furniture set.

Refrigerators from a well-known brand are equipped with doors that can open on the right or left, depending on the design of the room.

To change the direction of door opening, the facade is hung on a specially made kitchen cabinet. The number of hinges depends on the width of the façade and the material from which it is made. Each refrigerator model is equipped with installation parts and has clear instructions with an installation diagram.

Requirements for installing a built-in Samsung refrigerator

Depending on the type of equipment, the refrigerator can be fully or partially built-in. In both options, the device is placed in a separate cabinet, which is a continuation of the kitchen unit. Full built-in means that the refrigerator door opens simultaneously with the opening of the cabinet, but with partial built-in, the doors may be independent of each other or there is no cabinet door.

It is important to understand that it will not be possible to build any refrigerator into a regular cabinet. In this case, the equipment has special fasteners for the front doors, and the pencil cases are most often made to order for a specific refrigerator model.

Another difference between built-in equipment is the presence of special fasteners. In addition to ordinary hinges, the kit includes a special device that resembles guides, which serves to smoothly open both doors.

Regardless of which option you choose for your kitchen, you should know about the basic requirements for installing such equipment. The main thing to consider:

• There should be gaps of several centimeters between the top, bottom and side walls of the cabinet and refrigerator for free air circulation;
• the back of the pencil case should be completely open;
• Ventilation holes must be provided in the bottom surface of the refrigerator.

All these recommendations can be seen in the installation and operating instructions for built-in refrigerators.

In addition, there are several rules for placing such equipment in space. Namely:

• the device should not come into close contact with the wall of the room - it is important to leave a gap of 5-10 centimeters;
• the back of the pencil case with the refrigerator should not be placed against the wall with the heating radiator;
• in general, you need to install the refrigerator away from any constantly heating appliances;
• the doors of the installed pencil case must open freely to the maximum angle, without interfering with other devices or the passage.

Important! The two main rules in this case are not to combine refrigeration appliances with heating appliances, and also to install the refrigerator in a place so that all family members have free access to it.

Choosing a place to install a built-in Samsung refrigerator

The location for installation should be selected based on the specifics of the selected model of equipment. First of all, you need to take into account the dimensions of the built-in refrigerator plus the dimensions of the cabinet for it. Remember that the main goal is to save free space in the kitchen, so take into account that the future refrigerator should not interfere with free movement around the room.

Pay attention not only to the appearance of the refrigerator, but also to the design of the cabinet underneath it, because it will become an integral part of your kitchen set. Therefore, choose colors and textures that match the rest of the furniture.

How to choose the right size for a Samsung built-in refrigerator

When discussing the dimensions of a built-in refrigerator, it is important to note that they can be very different, ranging from narrow models of 60 cm to huge refrigeration complexes more than 2 m wide. To calculate the dimensions, you should start not only from the square footage of the kitchen, but also the ceiling height, quantity residents and regularity of purchases. Let us explain - if you are used to purchasing products in large quantities once every half month or month, then you will need a lot of space to store them. For those who visit the store every day and buy little by little, a small single-chamber built-in refrigerator is suitable.

If you want to place equipment under the countertop, its height should be about 80 cm, and its depth should correspond to the depth of the kitchen unit, that is, 56-57 cm. You should also take into account such a concept as “working volume”. This means the capacity of the refrigerator compartment, which is measured in liters. For a family of 2 people, 135 liters is enough, for a family of 3 - about 160 liters, for large families - from 180 liters.

Installing a built-in Samsung refrigerator

Installing a built-in refrigerator is a complex and painstaking process that requires certain skills and special tools. Therefore, this matter is most often entrusted to professionals, which saves time and even money (in case of accidental damage to the device or its fasteners).

But regardless of which way you decide to go - install the refrigerator yourself or resort to the help of specialists, you should at least roughly know the procedure for this process.

In any case, it is better to control the process yourself, even if a trained person is working, in order to avoid poor-quality performance of the service.

The installation process of a built-in refrigerator includes the following steps:

• Unpacking equipment, removing protective films from all surfaces. Checking the presence of all parts, fasteners and related elements specified in the instructions.
• Checking the dimensions of the refrigerator with the dimensions of the niche for installation - ventilation gaps and holes in the right places are a prerequisite.
• Check the lower part of the canister for level; in case of deviations, eliminate the problem when installing the ventilation platform.
• Removing the transport restraints from the device and installing it in a permanent place. Often at this stage, free space is left in front of the facade for ease of installation of doors.
• The location of the wires above or below the refrigerator compartment, their fastening;
• Installation of decorative panels that hide the nuances of installing equipment and cabinet doors.
• Sealing of metal parts, installation of protective elements.
• Installing the refrigerator to the required depth and fixing it in a permanent place.
• Connecting the device to the electrical network and checking its functionality.

The instructions for built-in refrigerators must describe in detail all the nuances of installing a specific model. If you decide to install the equipment yourself, be sure to carefully read the manufacturer’s instructions and recommendations.

Installing an external door on a Samsung built-in refrigerator

If the equipment is completely installed in a cabinet, it must be closed with a front door. You can carry out the installation yourself, following generally accepted algorithms:

By means of runners that allow the door to slide in relation to the front part. By means of fixed hinges.

In 2 cases, there are some subtleties that require equipment skills. Therefore, to avoid problems, you must carefully read the instructions.

Connecting a built-in Samsung refrigerator to the mains

To connect the refrigerator to the electrical network, it is important to determine the location and technical parameters of the outlets. If the building is undergoing general renovation and it is possible to change the location of the outlets, you need to move them to the most convenient location with easy and simple access.

At the stage of connecting electricity, it is worth considering the following subtleties:

• Do not place the device in such a way that the socket remains behind. This will cause a number of inconveniences when connecting. In addition, gaining access to the outlet in the event of a short circuit will be problematic.
• If the device is connected to one outlet using adapters or extension cords, it is necessary to evaluate the total load on the network.
• It is better to place the socket under the tabletop, in the side part of the set.

What to watch out for when installing a Samsung refrigerator

To avoid possible refusal of warranty repairs, you should carefully read all the points in the manual included with the unit upon sale. The installation instructions for a built-in refrigerator contain a list of supplied fasteners, the sequence of use of parts, requirements for installation work and operation of the installed device.

Facts of violation of operating techniques that lead to refusal of repairs under warranty may be:

• The use of heavy decorative panels leading to improper distribution of load between the appliance door and the cabinet.
• No gap or “podium” at the bottom of the niche for sufficient heat transfer.
• Place the device near heating devices (under the oven, near the microwave, etc.).
• Connecting the device to the electrical network through an outlet that does not comply with the requirements of the instructions.

Dimensions of small refrigerators

The height of mini-refrigerators, which include minibars, ranges from 50 to 120 cm, the width and depth are approximately 50-60 cm.

These single-leaf devices are suitable for installation in non-standard rooms: for example, living rooms or bedrooms. They are often placed in hotel rooms, installed in a cabinet or simply under a tabletop. Their capacity is usually from 120 to 220 liters.

Models with a height of 120 to 150 cm are also considered small. Among them there are both single and double doors, with any location of the freezer compartment. The width and depth of such devices also have a standard value of about 60 cm.

Advantages of Samsung No Frost

The two-chamber “Samsung No Frost” is easy to use; for the convenience of users, the refrigerator is equipped with instructions in Russian. The document describes in detail how to properly install and turn on a household appliance. Separate sections of the instructions are devoted to:

• features of using the unit;
• possible malfunctions;
• methods for setting up the device.

“No Frost” refrigerators differ from previous generation units in the design of the freezer compartment. It does not have a metal evaporator.

In Samsung No Frost, the evaporator is mounted in the rear wall housing. A fan is installed behind this device, which drives cooled air through a system of channels into the internal chambers. Most of the air flow is sent to the freezer, the rest is directed to the refrigerator compartment.

Condensation does not settle inside the refrigerator and freezer as in older models. The defrosting system works like this:

• frost accumulates on the evaporator;
• two to three times a day the device is thawed by heaters located directly under the evaporator;
• turns the defrosting timer on and off.

Without periodic removal of frozen ice, the refrigerator cannot operate. In Samsung No Frost, the command to turn on the heating elements is given by a timer. The action is performed by opening and closing the contacts of certain devices. During defrosting, the fan and compressor are switched off. The surface of the evaporator heats up, it defrosts, and the melt water flows into a storage tank located next to the compressor. During operation, the compressor heats up and evaporates moisture from the container.

This model has several advantages:

• the temperature inside the refrigerator compartment is evenly distributed;
• when the freezer is heavily loaded and the door is opened frequently, the temperature is quickly restored;
• the products are cooled by cold air, which is supplied in uniform streams into the chamber;
• the refrigerator is equipped with high-quality thermal insulation;
• the temperature mode can be adjusted using an electronic display;
• the device has a closed container intended for certain food and medicines;
• The use of biotechnology allows you to keep food fresh longer than in a conventional refrigerator.

Popular refrigerator models such as Samsung Bio SR43NXB, Silver Nano; Samsung Sr 398 control display may be slightly different. There are display types A, B, C. To set the desired temperature in the freezer, you need to press the Freezer button. The device allows you to set from -15 to -23 degrees.

The temperature inside the refrigerator compartment is controlled by the Fridge button. To quickly cool food in Cool Select Turbo (display type A), press and hold the Quick Cool button for 3 seconds. All mid-priced models are easy to operate. In contrast, the Samsung Family Hub Refrigerator, which costs an order of magnitude more, is equipped with a touch screen and timers.

The care and operation of the unit depends on the type and model of the refrigerator. The alphanumeric code of the device name contains its description. The first letter “R” - refrigerator, indicates the purpose of the household appliance. The second letters of the code tell about the location of the freezer:

• L – lower compartment;
• T – Top Mount – two-chamber device with a freezer on top;
• S - Side-by-Side position;
• F - two-door unit.

The code numbers indicate the height of the refrigerator, and the letters following them indicate the type of control:

• S - mechanical;
• “E”, “RR”, “Q”, “H” - electronic panels of different types;
• VQ-touch display.

Dimensions of narrow refrigerators

For kitchens with a small area, narrow refrigerators, the width of which does not exceed 60 cm, are best suited. Among them, there are models of 55, 50, 45 and even 40 cm.

Otherwise, they are no different from more spacious ones: the depth and height can be very different, the location of the freezer compartment is predominantly lower, useful options include No Frost defrosting, an electronic control system, and long-term preservation of cold when the power is turned off.

Setting the refrigerator temperature using the numeric keypad

Mechanical refrigerators have dials or knobs with numbers (range 1 to 7). The number does not show degrees, it indicates the position number. 1 - indicates the minimum flow of cold air, 7 - maximum. Typically the disk rotates clockwise.

We suggest you familiarize yourself with How to store dried mushrooms at home so they don’t spoil

On the electronic regulator, the temperature mode is set using a button. By pressing it, you set the temperature range programmed by the manufacturer or select the desired one. One press increases the value by 1°. The degrees are set in the range from 2 to 8°C.

First, it is recommended to set the temperature on the temperature regulator in the refrigerator from 2 to 4°C. After 6-8 hours, the indicator is checked using a thermometer. If it does not coincide with the required one, then adjustment is carried out. The set mode is influenced not only by the technical condition of the device and its design, but also by the frequency of door opening, the workload of the refrigerator, its service life, ambient temperature and other factors.

Before plugging in the Samsung No Frost refrigerator, you must place it in the room as prescribed by the manufacturer in the instructions for the device. After purchasing the unit, it is recommended to follow the following rules:

1. Sign the delivery certificate of the goods by removing the cardboard packaging and carefully inspecting the refrigerator for damage to the case, creases and breaks in the network cable. In addition, you need to check the completeness of the product and the availability of accessories for the refrigerator.
2. The equipment must be at rest for 5-6 hours before switching on. This time is required to evenly distribute the oil in the compressor chambers and adjust the sensors to the room temperature.
3. When installing, do not press the body of the rear wall of the product against the wall, or place the unit near heating appliances or windows. Installation in niches that prevent free air circulation is not permitted.
4. After placing the device in a permanent place - a hard, stable surface - using a building level with adjustable legs, the horizontal position of the installation is adjusted.
5. The power cord must freely reach the socket; tension, kinks, damage to the insulation, its contact with the evaporator grille, and fixation on structural elements are unacceptable.

Parameters of tall refrigerators

Tall refrigerators are a good choice for users who are taller than average. They are installed in apartments with high ceilings, especially if the room area is small.

Typically, models exceeding 200 cm are considered high. The maximum value is 250 cm, but such devices are rare. The main advantage of these models is their significant capacity with a standard or even small width, but they are not very comfortable for short people.

How to properly store food

To ensure that food retains its attractive appearance and freshness for a long time, it is placed in the refrigerator packed in containers. Raw and ready-to-eat foods are stored separately. Hot food should not be placed in the refrigerator.

Strong-smelling fish and smoked meats are tightly covered with several layers of polyethylene so that they do not emit a smell. Washed vegetables and fruits are wiped with a napkin and then placed in a container.

We invite you to familiarize yourself with how to remove unpleasant odors from the refrigerator at home and quickly.

The optimal temperature for storing most foods in the refrigerator is from 2 to 5°C. If the temperature in the refrigerator is set at a lower temperature, the food freezes slightly or freezes, losing its beneficial properties. Once defrosted, food spoils quickly.

At higher temperatures, bacteria begin to multiply in products, which leads to their rapid spoilage. Eating such food is dangerous to health.

If the temperature is set incorrectly, energy consumption increases. Ice forms on the walls of the unit, and it has to be defrosted frequently. Or, on the contrary, water is constantly leaking. All this shortens the life of the household appliance.

Dimensions of a single-chamber refrigerator

Single chamber refrigerators Asko

Single chamber refrigerators Bork

Single chamber refrigerators Miele

Single-chamber small refrigerators are chosen by buyers who do not intend to store a large supply of food or prefer to eat out. The freezer compartment in such devices is absent or is located on top in the same chamber as the refrigerator.

They are not designed for effective long-term freezing, and their dimensions are modest: height from 50 to 160 cm with a standard width and depth of 55-60 cm. Their capacity is from 100 to 200 liters. The advantage of such models is their favorable price and low weight, which is important for free-standing models.

How to use

The Samsung No Frost refrigerator's operating instructions are quite simple, and servicing the household appliance does not require compliance with any special rules. Before use, you need to wipe the inside of the refrigerator walls with a clean sponge, wash the drawers and shelves. When the compressor starts working after turning on the product, you need to set the desired temperature on the display or select the cooling mode using the Cool-Hot control knob located in the refrigerator compartment.

The new two-chamber unit is loaded with products gradually: the next portion is placed after the previous one has cooled.

The product will serve the user for a long time without breakdowns if you follow the simple operating instructions:

• place freshly prepared culinary dishes in a two-door refrigerator only after they have cooled to room temperature;
• Before storing, products should be hermetically packaged and containers containing food should be covered with a lid - this prevents the surface from weathering, moisture evaporation, and the formation and spread of unpleasant odors;
• When placing products, you need to leave distances between the bags and the dishes, they are necessary for the unhindered circulation of air flows;
• place food in appropriate compartments, wipe wet fruits and vegetables dry before placing them in the refrigerator;
• carry out inspections in a timely manner: remove products with expired shelf life from the chambers;

View » What to do if the refrigerator is very cold

Dimensions of two-chamber refrigerators

Two-chamber devices, the most common and in demand, are available in all sizes - small and large, high and low. The standard is considered to be models with a width of 60 cm, a height of 85 - 240 cm, and a depth of 60 cm.

In the Hausdorf store you can find models with 2 chambers with a height of 45 to 240 cm, a width of up to 84 cm and a depth of up to 85 cm.

Among them, you can choose built-in and free-standing ones with many possibilities - a freshness zone, automatic defrosting of both chambers, an inverter motor, any location of the freezer. The buyer can choose a unit of any color and style to suit the interior.

Standard sizes of Side-by-Side refrigerators

For those lucky enough to have a spacious kitchen, the spacious Side by Side appliances will suit you. Their freezer is located on the side, which significantly increases its volume:

• height ranges from 170 to 200 cm (most often 180 and 189 cm),
• width can reach 120 cm (with an average value of 78 cm),
• depth - 85 cm.

With a total capacity of up to 800 liters, the freezer compartment volume is up to 300 liters.

These models are the most advanced technically. They are equipped with a number of innovative technologies: an electronic control system with a display and the ability to remotely control from a smartphone, an ice maker, a separate temperature control system, and a freshness zone.