First launch of a Bosch dishwasher

Such a useful purchase as a Bosch dishwasher greatly simplifies housekeeping and ensures economical water consumption. You can install the equipment by a service center technician or yourself, strictly following the manufacturer’s recommendations. But it is equally important to use the Bosch dishwasher correctly.

• Installing a Bosch dishwasher
• How to turn it on
• First use of the dishwasher
• Control panel and modes
• Required funds
• Care for PMM
• Bosch dishwasher catalog with reviews

Installing a Bosch dishwasher

While a compact dishwasher can easily find a place on the countertop, placing a larger built-in model requires some thought. The machine is installed taking into account the location of communications, namely: to the left or to the right of the sink. Some miniature devices fit directly under the sink.

When integrating the machine into an existing kitchen unit, it is necessary to dismantle the selected cabinet to free up space:

• remove the door from its hinges;

• remove all shelves;

• remove the back wall and bottom panel.

If you can’t get rid of the back bar, you will have to make holes in it or the side walls necessary for the hoses to come out. Some modern manufacturers provide a niche for a dishwasher when making furniture. To protect the tabletop from moisture, a sheet of metal is attached to its inside.

Bosch dishwasher

To ensure proper operation, the device must be connected in accordance with the supplied instructions. To do this you should:

• carry out installation of all parts provided in the package;
• adjust the position of the machine using a building level;
• connect the equipment to the drain;
• provide cold water supply;
• connect the machine to the electrical network.

To install the dishwasher you will need the following tools and accessories:

• adjustable wrench;
• pliers;
• screwdrivers;

• roulette;
• building level.

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

The machine's power cord may be short, in which case you will have to install a new moisture-resistant outlet. A professional can do this kind of work better.

Let's look at how to use a Bosch dishwasher

Modern dishwashers are quite convenient and practical equipment. It is almost impossible to get injured while using them. But despite this, all safety precautions must be observed when using the machine.

Sometimes housewives complain that it is impossible to wash dishes in machines such as Siemens, Bosch, Electrolux, Sigmund and Stein, Veko, Ariston, etc. because they simply do not wash them. And the point here is not at all the poor quality of equipment, for example, the Electrolux brand.

Any operating mode of a Bosch dishwasher can be selected at the top of the door

The reasons for ineffective laundering when using units of well-known brands usually have completely different factors. There are several of them, and all of them have nothing to do with the technical structure of the machine.

Reasons for poor dishwashing in machines:

• You should not expect a very good result if initially there was dried or burnt food on the walls of the plates, pots or spoons when loading them into the machine;
• Sometimes dishes may not be washed due to the wrong option that you set for them, or because additional programs were not enabled;
• Dishes do not wash well even when the machine is overloaded;
• It is necessary to clean the impeller nozzles as often as possible;
• Do not allow any solvents to get inside the device;
• It is prohibited to use household chemicals for manual dishwashing;
• Operating the machine without regeneration salt is not recommended;
• Do not open the door while the device is operating;
• After each wash, the filters must be thoroughly cleaned;
• Wipe the external surfaces of the machine regularly;
• If any misunderstandings arise, do not try to repair the device yourself.

Reliability and ease of use are what distinguishes this equipment from reputable brands. If you follow all the technologies for its use and properly refill the device, then your dishes will always be clean, and the device itself will last a long time.

How to turn it on

Many manufacturers, including Bosch, recommend conducting a dry test run of a new dishwasher. This action helps:

• remove any remaining grease and dust from the device parts;

• evaluate the correct installation and operation of the equipment.

In addition, if problems are identified, you will not have to remove unwashed dishes from the machine.

compartment for PMM products

The washing chamber should be empty, but you will need to use detergent and special salt from the starter kit. The salt compartment is located in the pull-out lower basket at the bottom of the machine.

After unscrewing the lid, add 2/3 of the contents of the pack. The reservoir must not be overfilled.

Then, on the inside surface of the dishwasher door, find compartments for products: powder, gel or tablets.

Now you can turn on the machine and set the type of detergent used on the panel. Salt consumption depends on the water hardness level specified by the user.

Is a dishwasher profitable?

Oh yes! No

Bosch devices come with test strips for determining this indicator. If you do not soften the water with salt, the walls of the chamber will quickly become covered with scale.

All that remains is to select any operating mode and press the “Start” button. Don't forget to open the water tap.

Procedure before first start

any packaging materials or advertising stickers left in the chamber , which can be found in Bosch dishwashers of the SPV series, Hansa and many other models of popular brands.

Pay attention to the foam packaging balls , of which there are quite a lot inside the PMM. All this must be removed when detected.

Also wipe the camera with a clean cloth to remove any obvious signs of dirt .

Mechanical cleaning of the dishwasher chamber before first use

Although dishes are not loaded into the PMM, the corresponding compartments still need to be filled with special softening salt, washing powder or gel, rinse aid , or use a 3-in-1 tablet that combines detergent and rinse aid.

Even if you use "all-purpose" tablets, still add salt to the hopper. Before doing this, pour about 1 liter of purified water into the tank. Then add about 500 g of salt there.

The salt compartment is located in the bottom of the chamber and is closed with a lid

Be sure to mark on the control panel what kind of composition the dishwasher should wash the chamber with - powder, gel or using a tablet. This rule applies to those PMM models that do not themselves recognize the type of detergent.

Variety of dishwashing detergents

In the presented video you can familiarize yourself with the advantages and disadvantages of various dishwasher detergents:

In addition to specifying the type of detergent, you need to set the salt consumption level (if the machine does not detect it itself). This parameter depends on the degree of water hardness - the harder it is, the more product is needed to soften it. From the video we offer for viewing, readers will be able to learn how to set the salt consumption level in a Bosch dishwasher:

To determine the level of hardness, use special strips that usually come complete with PMM. Such test strips can also be purchased in retail stores.

Determining the degree of hardness of tap water by the color of the test strips

The chemical industry produces special detergents for the first start of a dishwasher. They have a more powerful cleaning and disinfecting effect, destroying contaminants that arise during the production process. But these household chemicals are intended only for the first use of the dishwasher. You should not use such means in the future.

The means for the first launch of PMM of the Bon and Magic Power brands have proven themselves well.

Last stages of preparation:

• set the machine level by tightening the legs of the body;
• check whether the nozzles rotate freely by twisting them by hand;
• remove the filter located in the bottom next to the sprayer and rinse it with running water.

First use of the dishwasher

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

After the dry test wash, allow the car to cool slightly. Excessive use will overload the heating element and pump.

When the device has cooled down, load the chamber with dishes that have been cleared of food particles and add detergent to the compartment. The salt and rinse aid left over from the test run will last for a couple of months.

Don't underestimate the importance of properly storing dishes and cutlery in baskets and holders. High quality of cleaning is achieved if the movement of the rocker arms occurs without interference, and water access is provided to all areas of the washing chamber.

Having laid out the dishes, select a program and run it. As you continue to use the dishwasher, these actions will become automatic and will not take much time.

Bosch Silence SMS24AW01R

Operating instructions for Bosch dishwashers

On the facade of the dishwasher there is a control unit with a power button, keys for selecting modes, additional settings and an electronic display. Modern machines have up to ten different programs. Also, some machines are equipped with LEDs to inform you about the end of the mode, lack of detergents, high water hardness, possible leakage or water shutdown. Each program has its own intuitive icon and numerical value.

The first launch is the most important!

The first start after purchasing a dishwasher is a strategically important moment! Never neglect this step, otherwise you can significantly reduce the life of the machine. The first use should be idle, that is, without dishes and detergents at maximum temperature. This is necessary in order to check the correct installation, the presence of leaks, extraneous sounds during operation, and also to wash off factory lubricants and dust.

The manufacturer often includes test strips in the package to determine water hardness. It is necessary to measure the water before starting and, based on this, add softening salt to a special compartment. This salt is necessary for the normal functioning of the machine and should always be available. Otherwise, if you do not use it, unsightly whitish stains will remain on the dishes, and scale can damage the heating elements.

The dishwasher adds salt when washing itself; you just need to constantly monitor its level. At the first start, water is added to the salt compartment; this will not be required in the future.

Rules for loading dishwashers efficiently

To effectively clean dishes, you need to load the machine correctly.

Simple rules will help you achieve ideal cleanliness of dishes and increase the service life of your Bosch dishwasher:

• Avoid overfilling and preventing the circulation of water and detergents.
• Start loading the machine from the bottom up. First, plates and dishes are set up.
• Mugs and bowls are placed on the top level. Glasses, glasses and other fragile dishes are secured with folding holders.
• Spoons, forks, and spatulas are placed vertically with the handle down. The knives are opposite, point down.
• Pots, pans and stewpans are placed on the lower level, having previously been rinsed to remove large food debris, as pieces of food can clog the filter. It is also better to soak dishes with burnt food in advance to get the best results.

IMPORTANT! Products made of metals that are not resistant to corrosion and detergents, some types of plastic, fragile materials, wooden utensils, glazed and painted dishes, kitchen textiles should not be washed in the dishwasher.

Selection of detergents

For dishwashers, you will need a small arsenal of special chemicals. Liquids, powders and tablets are used as detergents. They are responsible for dissolving fat and removing dirt from dishes. For shine and quick drying of dishes, conditioner is added. For dosage, follow the manufacturer's recommendations on the packaging. Otherwise, the dishes may become sticky or streaky.

There are complex additives with conditioner, detergent and softening salt. But their inconvenience lies in the impossibility of choosing the right dosage of a particular product depending on the type of dishes and water hardness.

Control panel and modes

The location of the dishwasher control panel depends on the type of device. For the built-in model, buttons and indicators are located at the end of the door. Freestanding machines have a panel on the front of the cabinet.

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

In most cases, the user is able to understand the meaning of the symbols on the buttons intuitively. If a problem arises with this, you can always find clarification in the instructions.

Bosch offers customers a wide variety of models with various modes and great functionality. When choosing a program, you should focus on the number of dishes and the degree of soiling. As a rule, the machine is equipped with the following modes:

• standard;
• fast;
• delicate;

• intensive;
• economical.

The more intensive the cleaning, the greater the consumption of water and electricity. The use of multi-stage processing, including pre-soaking, washing, several rinses and drying, is justified only when the machine is fully loaded with very greasy dishes. The standard program is suitable for everyday use.

Delicate modes are included for items made of thin glass, or in the case of joint loading of dishes made of different materials.

The presence of several types of drying is of no small importance. PMMs in the mid-price segment are equipped with condensation drying, its action is based on creating a high temperature in the chamber. Expensive models are equipped with a powerful fan, which ensures quick drying of dishes without streaks.

BOSCH SD4P1B

Required funds

As a rule, along with the machine, buyers purchase a starter kit, which includes all the necessary tools to operate the device for the first time.

Bosch dishwashers use any detergents that are available today in specialized stores:

• powder;

• liquid;

• compressed tablets.

When purchasing, it is important to make sure that the product is intended specifically for machine washing of dishes, and not for hand washing.

Depending on the components in the composition, there are 3 types of substances:

• with phosphates and chlorine;

• with chlorine and without phosphates;

• with phosphates, but without chlorine.

If there are no phosphates in the composition, a white coating will appear on the surface of the chamber and even on the dishes. If faded plates and cups require bleaching, it is better to use a product with chlorine.

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

Using a rinse aid will help add shine to glassware and prevent water marks on washed plates and cups. Change the volume of rinse aid depending on the desired result. But its excess can lead to the appearance of rainbow stains.

Combined products contain all the necessary components. Their disadvantage is that it is not possible to adjust the salt content. It is recommended to do this.

You can find out which compartments are used for different products and the order in which they are loaded from the instructions for the dishwasher.

How to turn your dishwasher on and off for transport

After you have purchased and installed a new dishwasher, you only have one step left before you can forget about washing dishes by hand - start it. However, this step must be done correctly, because otherwise your brand new device may be hopelessly broken.

To transport the dishwasher, it must be unplugged and disconnected from the pipes.

The first launch of a new dishwasher is a kind of familiarization with the new equipment. Don't try to experiment on the first day. During operation, you will definitely study all the capabilities of the unit and be able to evaluate them. But not today.

Experts have developed a certain procedure, or rules of use, recommended for actions when starting up the dishwasher for the first time.

When starting up your dishwasher for the first time, do the following:

• Inspect the device and make sure that it is not damaged;
• Free the device from all foreign objects;
• Carry out the first start of the machine without dishes;
• Don't forget to add ionic salt to the softener compartment;
• Set the machine to medium temperature and operating time.

Having completed all these steps, turn on the unit and ensure uninterrupted operation. In case of problems, contact your dealer or service center.

Care for PMM

In order for electrical equipment to function properly over a long period of time, it must be properly cared for. Full information about caring for a specific model of Bosch dishwasher can be found in the manual that came with it.

• Oddly enough, even high-tech machines need to be cleaned inside and out, scale and grease removed, sprinklers and filters washed.
• In some cases, it will be enough to switch on the intensive program with detergents, but with an empty chamber. This will help clean the rocker arms from accumulated grease and scale deposits.
• If you do not monitor the condition of the filters, dirt can block the drain pump. In such a situation, you will have to take the car in for repairs. Therefore, after each work process, it is necessary to manually clean the filters using running water.
• In a similar way, sprayers are washed from food residues. When they are dirty, the quality of the wash decreases.

According to statistics, problems in the operation of the machine arise as a result of operating errors: improper loading of dishes and the use of low-quality products. Careful use and proper care of equipment will eliminate the need to wash dirty dishes by hand every day and free up time for relaxation and more exciting activities.

Video