Atlant washing machine: error f4 and other common faults and what to do about it

Atlant washing machines from the Belarusian manufacturer have proven themselves well among many consumers in the Russian Federation and CIS countries. The Minsk plant initially specialized in the production of refrigerators. Now he has a wide range of household appliances, including a favorite assistant for many housewives. Over the short history of the company (no more than 60 years), only high-quality washing machines of practical design came off the factory assembly lines. But sooner or later the equipment breaks down, and then Atlant washing machines have to be repaired. You can do such work with your own hands, but if the machine is still new and recently purchased, then independent manipulations will void the warranty period. Otherwise, you can try your luck and at the same time gain experience.

Each unit of household appliances from this manufacturer undergoes the necessary tests in accordance with European quality standards. Products are supplied not only to Poland, Slovakia, Lithuania, Hungary, but also enter the market in Germany and France.

Washing machine device

It is possible to repair a washing machine only if you have a clear understanding of how it works and what the role of each of its parts is. When the operating principle and purpose of each part is clear, then by the malfunction itself it is possible to identify the cause of its occurrence.

The most common models of washing machines have a front-loading type of laundry. In modern realities, such equipment is located in the kitchen, covered with a countertop, or in the bathroom. In other words, loading laundry this way is very convenient.

Common error codes for Atlant washing machines and troubleshooting

In this section we will talk about the most common malfunctions that you may encounter, and how to deal with this situation before the technician arrives. Often these are errors such as f3, f4, f9 and f12. So what to do if at least one of these codes is displayed?

Error code f3

An error code f3 was displayed or the third and fourth indicators came on. , a breakdown of the heating element occurred , which must be completely replaced or some elements repaired. The control module may have broken down and must also be replaced.

Error code f4

One of the most common errors that appears on the display is the error code f4. If there is no display, the fault will be shown on the second LED indicator, which is located on the control panel, namely in the bottom row of lights. Don’t rush to panic and call a car repairman. In this situation, you can independently find out what exactly happened to your Atlant washing machine. Error f4 indicates that there is a problem with draining water . Basically the problem is this:

Failure to connect the drain pipe to the sewer pipe.
The drain pipe is clogged or kinked.
The clutch is clogged or the ball is stuck.
The drain filter is clogged.
The pump is broken, meaning the impeller could be jammed.
Pump malfunction.
The control module has broken down, namely: a resistor or a triacistr.
Electronics failure, problems with electrical circuits.

Control unit or module

As noted above, it is impossible to repair Atlant washing machines yourself without a clear understanding of how its main units work. The control unit is a panel, inside of which there is a board with a set of various electronic parts. On the panel itself there are knobs or buttons that set the washing mode. The board is responsible for recognizing them. During the process itself, it controls all parts of the washing machine in accordance with the specified operating mode. Turning on/off the water supply, heating it, connecting the drum, activating the pump, etc. - all this is the responsibility of the control unit of household appliances. When might it be necessary to repair the Atlant washing machine module?

Each parameter is monitored by different sensors, information from which is processed by a microprocessor installed on the board. The entire control system is quite complex, however, it is the most important part of any modern automatic washing machine.

Among the sensors are:

Water level sensor - according to its information, the water supply is turned on and off.
Temperature sensor - usually located below the location of the tank, is responsible for turning the water heating on and off.
A tachometer, like a tachometer in a car, measures the speed of rotation of the drum.
Time relay - necessary for tracking various stages of time intervals.

All of them are connected to the board via wires, and relays are installed in some sections of the circuit.

Module failure

The main symptom that indicates the need to repair the control board of the Atlant washing machine is when the equipment begins to confuse the washing programs. The cause of other breakdowns may be a malfunction of the sensors, but failures of operating modes are a stable disease of the processor.

As a rule, repair of the control board is carried out in extremely rare cases, since it is easier to replace it with a new and working circuit. But there is one disappointing news here - the fact is that the cost of the board is quite high, although the replacement process itself is not difficult. Just disconnect all the connectors, remove the faulty circuit, and replace it with a new one.

The most important reason for the failure of the main electrical component of a washing machine is power surges. And since the board is quite fragile and vulnerable, it is necessary to power the equipment through a stabilizer.

It is better to install such a device to power the entire apartment or private house. This will allow you to avoid frequently calling a technician to repair the Atlant washing machine at home.

Replacing the heating element

A frequent breakdown in washing machines is the breakdown of the heating element. As a rule, it fails due to physical wear and hard water shortens its service life. Scale settles on the heating element, as a result of which the load on it increases . You can replace the heating element in the washing machine with your own hands.

To do this you need:

Disassemble the machine, or rather remove the back cover of the case.
Next, under the tank, find the heating element itself, or rather its terminals.
Disconnect the power wires and the ground wire, and also disconnect the terminals from the thermistor if it is built into the heating element. In some models, the temperature sensor is installed separately.
We loosen the central bolt by turning the nut a few turns counterclockwise and try to press it inward.
Please pay attention! In Atlant washing machines, it is sometimes not easy to remove the heating element from the holder, since the sealing rubber becomes very “sour” or pressed in during installation.
You need to take a flat-head screwdriver and hook the heating element by the base, then pull it out towards you with a loosening movement from side to side.
Before installing a new heating element, do not forget to clean the “nest” of scale and debris.
Reassemble everything in reverse order.

Checking the functionality of water level and temperature sensors

A malfunction of the water level sensor (pressostat) usually occurs when water is drawn in and drained. The sensor does not send a signal about the level of collected water and the tank may overflow with water, or the machine may even stop before spinning, since the pressure switch does not signal about drained water, or the laundry will not be wrung out well. The article Checking the pressure switch of a washing machine describes how to get to this unit, remove and replace it.

As for the temperature sensor, if it breaks down, the machine overheats the water, and sometimes does not heat it at all.

In order to check the functionality of the sensor, you must:

Remove the back cover of the washing machine and remove the sensor. It can be located either at the base of the heating element or on the tank.
We measure the resistance of the sensor using a multimeter.
Place the sensor in hot water and let it warm up a little.
We measure the sensor resistance again.
We compare the obtained measurements: if they differ significantly, then the sensor is working, and if not, then we replace it with a new one.

When disconnecting terminals, mark them so that you can reconnect them correctly later.

Troubleshooting the drain and filling system

If at one point the machine stops draining water, then the search for the cause should begin by inspecting the drain filter, hose, and then the drain pump. If debris and foreign objects get into the filter, the machine may not only stop draining water, but also not turn on. Therefore, before putting laundry and things into the drum, the pockets are inspected and all excess is removed.

Cleaning the drain filter should become a regular procedure, this way you will protect your machine from breakdowns and yourself from spending money on repairs. You can also clean the drain hose yourself; the maximum cost is two hours.

The pump in the Atlant washing machine is located, as in all machines, in the lower part. You can remove it from the housing through the bottom by placing the unit on its side. This process is the same as in Ariston, Beko, Samsung machines; we have described it more than once in articles on our website, for example, in the article on how to clean the drain pump of a washing machine.

As for excessive water entering the tank, in this case you have to check the water inlet valve. It is located on the back side of the machine, in the upper part, and the inlet hose is connected to it from the outside. Therefore, in order to check and inspect the water inlet valve, you need to disconnect the machine from the network and from the water supply, then open the top cover of the housing. Next, disconnect it from the wire and use a multimeter to check the resistance of the valve, it should be about 2-4 ohms. Otherwise, we change the valve, for this:

We remove all the hoses from the valve, loosen the clamps, and note their correct location.
Unscrew the bolts holding the valve. If the valve is secured with latches, you need to release them.
Turn the valve to the side and pull it out.
We install the new unit according to the algorithm in reverse order; the valve cannot be repaired.

Replacing the motor and control module

One of the specific breakdowns of the Atlant washing machine is the failure of the electric motor. In most cases, the engine can be repaired without having to buy a new one. The fact is that the “weak link” in the engine is the brushes. But this work requires some skill, so in this case we would recommend contacting a specialist.

We follow the same advice in the case of a faulty control board. A board is a complex microcircuit that can only be dealt with with special equipment and tools. Based on the results of an accurate diagnosis, you can decide whether it is worth replacing an expensive unit or buying a new machine.

Tips for preventing breakdowns

Even the most reliable equipment fails, but what can we say if the washing machine is assembled from Chinese components. However, in this case, the reasons for machine failure can be called:

Quality of water for washing.
Incorrect installation and connection of the machine.
Terms of Use.

To summarize this article, let us recall the basic rules that will help extend the life of your assistant:

Always check pockets for small items and debris.
Carry out regular descaling.
Use softeners for hard water, such as a cleaning filter.
Rinse and clean the drain filter regularly.
Wipe the cuff and powder cuvette after each wash with a dry cloth to prevent mold from developing.

Interesting:

Which washing machine is better: Indesit or Atlant?
Best top loading washing machine
Comparison of technical characteristics of washing machines
Which Bosch washing machine is better to buy?
Repair of faults in Ardo washing machines
Which dishwashers are the most reliable (review)

readers

01/21/2017 at 14:56
Dima:
Read also: Convection drying in a dishwasher
My belt is falling off the drum.
Answer
07/10/2017 at 10:16
Sergey:
When turned on, the machine knocks out, what should I do?
Answer
07/25/2017 at 00:10
Sasha:
Water is constantly flowing in the machine through 1 drawer of the PDA
Answer
10/25/2017 at 11:54
Olya:
The electric drive is damaged. Is a replacement possible?
Answer
10/31/2017 at 17:04
Dmitriy:
Shows F 13 45У82
Read also: Synthetic mode in the washing machine
Answer
11/18/2017 at 07:29 pm
Anonymous:
Atlant washing machine, the lights are on, but it won’t start.
Answer
02/01/2018 at 00:41
Anonymous:
The Atlant machine showed error F 13, what should I do?
Answer
02/21/2018 at 11:43
Dina:
Three identifiers are lit on the machine, but when you press the start button it does not turn on. What could be the problem?
Answer
02/26/2018 at 16:04
Vladimir:
Command F4 was displayed.
Answer
03/02/2018 at 13:25
Eugene:
Hello. The buttons on the 35M101 typewriter are stuck, is there anyway I can do it myself?
Answer
03/04/2018 at 15:41
Valery:
Machine 50у102, error f9. The ROT1 track on the board is burned out. What resistance should there be on the tachometer? I have 16 ohms.
Answer
04/05/2018 at 01:17
Maksim:
Machine 60s107. What can break in the board if the pump does not turn on. He is a worker.
Answer
04/07/2018 at 11:38
Vladimir:
While the machine is operating, when switching the washing mode, the machine knocks out.
Answer
04/07/2018 at 11:42
Vladimir:
During operation of the washing machine, when switching the washing mode, the machine knocks out. What is the reason?
Answer
04/15/2018 at 14:00
Artem:
Colleagues, tell me. Atlant machine. There are 4 wires going to the pressure switch. When I was taking it apart, I took a photo of which one goes where, but the photo was deleted by accident. Now I can't connect it. How do you know which wire goes where?
Answer
06/02/2018 at 14:10
Danil:
I tried Kirill's advice. It doesn’t work and she’s tired of her beeping.
Answer
Read also: Rating of ironing systems: 12 best models for saving time when ironing
06/24/2018 at 18:08
Irina:
Please tell me, SMA 45U101 boils water in any washing mode, the temperature sensor has been replaced.
Answer
10/03/2018 at 04:24
Vladislav:
The machine does not spin. The program starts, but when it comes to spinning and rinsing the LED starts blinking.
Answer
12/19/2018 at 21:21
Masha:
How to properly assemble the door handle of an Atlant 45u82 machine?
Answer
12/25/2018 at 18:07
Alexei:
Hello! There is a problem with the pump, the water sometimes drains, and sometimes the pump stops and does not turn. When you tug it a little, it drains. When I took it apart myself, there was water inside. It is difficult to turn with your fingers, and after connecting 220, the blades twitched and did not spin.
Answer
05/22/2019 at 10:38
Zoya:
The drain does not work in any program. The filter was cleaned and the impeller too. The ball moves in the pump. The pump hums and gets very hot and does not work.
Answer
07/13/2019 at 20:10
Nina:
The machine starts washing and shows F5. We read that this means there is no water pressure, but there is pressure and very good, what could it be?
Answer
01/22/2020 at 01:59
Anonymous:
Atlant. The tank is cracked. Water dripped near the bearings and everything completely fell apart. What can I use to seal a crack? Will it last for a long time?
Answer
02/09/2020 at 22:39
Elena:
Hello, please tell me what to do? The Atlant washing machine displays error F13.
Answer

Water supply valve

The washing machine is connected to the water main through a hose, at the end of which there is a valve that ensures the supply and shutoff of water.

If the equipment refuses to draw water, and it is definitely present in the water supply and the pressure is within normal limits, then the problem may lie in the valve. Do-it-yourself repair of the Atlant 35m102 washing machine in this case will be reduced to cleaning it from salts and other contaminants. But if this does not help, then it is better to simply replace this part with a new valve.

Failure options

Masters identify two large groups of reasons - subjective and technical:

Misuse	Factory problems
metal or plastic objects forgotten in your pocket, which can damage the drum during washing; too much detergent used; hard water leading to scale on heating elements; excessive use of the machine.	Malfunction due to defects (control module) is an extremely rare occurrence; on average, they account for no more than 3% of the total number of cases.

Atlant washing machines are equipped with a special system that allows it to report the reason for the suspension of operation. For this, certain error codes are used.

Washing machine repair

Power unit

Yes, it also has its own motor, like a car and other similar equipment. It is the engine that rotates the drum, where, in fact, dirty laundry is washed. As a rule, torque is transmitted to the working container through a belt drive.

But some models are equipped with direct drive. It happens that the drum rotates manually, but when you try to start the washing machine, it does not rotate. In this particular case, the motor itself is faulty, which can be “treated” by repairing or replacing it.

heating element

Another necessary device, without which the operation of the Atlant 35m102 washing machine is impossible. It is not difficult to do the repair yourself, and if the heating element is faulty, you can replace it yourself.

The main duty of this device (as you might guess) is to provide water heating. If during washing it does not heat up, although it should, the first thing you should do is check the functionality of this element. But if it is fully operational, shift the focus to temperature sensors. Perhaps the reason lies precisely in their incorrect operation.

How to find out what happened in the Atlant car?

Depending on the type of disabled function, you can guess the reason.

Problem	Possible malfunction
The machine does not turn on	damaged power socket or wires inside the device itself; Damage to the start button or control module.
Laundry doesn't wring well	failure or oxidation of motor contacts.
There is water left in the drum after washing	clogged drain hose; failure in the drain pump.
Significant vibration during centrifugation	bearings have become unusable
No water heating	heater failure
Leaks	the cause is determined by the area of water exit (under the bottom of the car, from the hatch, at the level of the powder container) - a damaged hose, wear of the pipe or oil seal, rupture of the cuff.

The Atlant washing machine is a smart appliance that, using codes, will indicate the possible area of violation. These digital or alphabetic designations are displayed on the display. The list can be viewed in the attached instructions in Russian.

Washing machine control panel

In order not to miss a precious moment and complete repairs on time, you need to listen to the work. If suspicious changes occur, take action.

Signs that the Atlant washing machine drum needs to be repaired

To figure out why the drum does not rotate, you should first rule out the most common and simple reason - a faulty door latch. And if the locking is faulty, the drum will not rotate. To check, just press the door button several times; there is a chance that it is simply stuck.

If the washing machine is equipped with a belt drive, the belt may jump out of place, and then, for obvious reasons, the drum will not rotate. It can also simply slip, which is usually accompanied by a characteristic whistle. And if the equipment is also equipped with a tensioner, then it’s worth adjusting the belt and tightening it a little tighter.

It is important not to overdo it, otherwise too much tension can lead to rapid wear of the bearings, which will negate the entire DIY repair of the Atlant washing machine. Such actions can completely damage the drum. You can check the degree of tension like this: if, when pressed, the displacement value is approximately 12 mm, then the parameter is set within normal limits.

Otherwise, when the tensioner is missing, it is better to replace the belt. You can do this yourself without outside help. However, the reason that the drum does not rotate may be the worst thing - the motor has burned out. Here you can check for yourself the presence of voltage at its terminals: if there is none, then nothing can be done; it is almost impossible to carry out repairs on your own. In this case, you cannot do without the help of a specialist.

The drum does not fill with water

In Atlant washing machines, the weak link is the water intake system. When it is in good condition, water, as the level in the working tank rises, begins to compress the air in the pressure regulator compartment. When a certain parameter is reached, the switch is activated, closing the inlet valve. At the same time, the heating element is turned on and the door lock is activated. If the supply tube is damaged or clogged, the system will not work.

In this case, the Atlant washing machine repair instructions will look like this:

The first step is to check the connection between the tube and the water level switch. If its end is quite hard, you should cut it off and then put it back in its place.
Checking the switch is also not difficult, just blow into the tube - if you hear a click, everything is in order. But it is better to make sure of this by checking it with a multimeter. If it is faulty, there is only one verdict - replacement.
Then you should loosen the clamp that secures the pressure chamber to the drum. Inspect the cavity for cracks and deformations.

Sometimes the reason may lie in a clogged filter. Then the manipulations will be like this:

Close the tap that supplies water.
Disconnect the hose from the inlet valve of the machine.
Remove the filter and rinse it under running water.
Install the valve, connect the hose and restore the water supply.

If the inlet valve is faulty, self-repairing the Atlant washing machine is also easy - just replace the valve with a new element.

Washing machine drum does not fill with water

First of all, check whether the water supply taps are open. Next, make sure that the inlet hose is not deformed or clogged. Rinse it if necessary.

If the inlet filter is clogged, perform the following manipulations:

Close the water supply tap.
Disconnect the hose from the unit inlet valve.
Remove the filter and rinse thoroughly under running water.
Install the valve, connect the hose and open the water supply valve.

If the intake valve breaks, it will need to be replaced. You can also do this yourself. It is necessary to remove the valve from the inlet pipes and replace it with a new one.

The water intake system is a weak point in Atlant machines. In good condition, when the water level in the drum rises, the water compresses the air in the pressure regulator compartment. When the pressure reaches the required value, the switch operates and the inlet valve closes. At the same time, power is supplied to the heating element and the switch for prohibiting premature opening of the drum door is activated. If the tube is damaged or clogged, the water supply system will not work.

To troubleshoot:

Check how the tube is installed on the water level switch. If the end of the tube has hardened, cut it a couple of centimeters and put it back on the switch.
To check that the switch is working properly, blow into the tube. The click of the switch should be heard.
Afterwards, loosen the clamp on the hose that secures the pressure chamber to the drum.
Flush the chamber so that the inlet and outlet ports are clean and free of blockages. Inspect the camera for cracks and deformations.
Make sure the switch is working properly: test it with a multimeter. If damaged, replace with a new one.

Drum filling too slow

The most common cause in this case may be a clogged or deformed inlet hose. It is worth rinsing it under good water pressure. The problem may also be caused by a clogged inlet filter. To fix the damage, just remove and wash it.

It is also worth paying attention to the pressure in the line; if it is below normal, water will also flow slowly. The minimum permissible parameter is 12 atm. You can increase the pressure by placing a pressure tank near the ceiling of the apartment or in the attic of a private house.

Water does not drain

The first thing you should pay attention to in this case is the condition of the outlet hose. It is worth checking it for blockages and rinsing it well (if necessary). Another reason may lie in a clogged pump.

To understand whether the pump of the Atlant washing machine needs repair, or to eliminate the possibility of its malfunction, you need to do the following:

Prepare a rag in advance, as the appearance of water cannot be avoided.
Remove the clamps that secure the hose to the pump and check if it is clogged.
Armed with a pencil or any other similar object, check the rotation of the impeller.
If the rotation of the impeller is difficult, you should disconnect the electrical connector and, unscrewing the fastening bolts, remove the pump.
Mark the location of the pump parts or take photographs of their location to avoid confusion during subsequent assembly. After this, separate the two parts of the pump by removing the clamps or unscrewing the screws.
Check if there is debris in the impeller chamber. You should also make sure that there are no wound threads on the shaft.
Wash both parts of the pump and then put them back together.

If the manipulations done do not produce results, it is worth replacing the pump with a new unit.

Problems with draining water

The first possible reason for water retention in the drum is a clogged outlet hose or its deformation. Check the hose for blockages and flush if necessary. The exhaust filter may also be clogged. You can clean and replace it through the hole located at the bottom of the washing machine.

Cleaning the drain filter

The next possible cause is a clogged pump. Remove it and check for foreign objects. To do this you should:

Prepare a rag for water in advance.
Remove the clamps securing the hoses to the pump. Check the hose for blockages.
Using a pencil, check the rotation of the impeller. If the impeller rotates slowly, remove the chip with wires and mounting bolts from the pump. Then remove the clamps or screws that connect the two parts of the pump.
Mark or take a photo with your phone of their location so as not to confuse them when assembling. Check the impeller chamber for debris, and also make sure there are no threads wrapped around the shaft.
Clean and reassemble the pump. If the above manipulations did not help, replace the pump with a new one.

Atlant washing machine repair: bearing replacement

A characteristic sign that the fault lies in the bearing is a crackling, humming or knocking noise made when the drum rotates. Its backlash should also alert you.

The process of replacing a bearing is quite labor-intensive, but this kind of work can be done on your own. To get to it, you need to remove the drum, which is easier to do through the top. The whole procedure looks like this:

The screws on the back side that secure the cover are unscrewed, after which you just need to pull it back a little and lift it.
The counterweight and transverse rod are removed.
The springs that secure the drum are removed.
The power unit is removed from the bottom side.
The hoses are disconnected from the drum.
Now, to make the process easier, you can remove the front panel, including the pump.
The rubber casing is removed, which connects the machine body to the drum.
The counterweight is removed, after which the drum can be removed out.
The drum body is of a collapsible type and is secured with bolts; after unscrewing them, you need to remove the pulley.
The working metal container itself is removed from the housing, and the bearings are removed.

At this point, the repair of the Atlant washing machine with your own hands is completed; in the future, all that remains is to carry out the assembly process in the reverse order and then check it.

If you are not confident in your abilities, it is better to entrust such work to professionals.

Is it possible to do repairs yourself at home or is it better to seek help from a professional?

Any washing machine is a complex mechanism, the operation of which is carried out through many different elements, structures and wires. Without certain experience and skills, repairing an Atlant washing machine with your own hands can lead to irreparable changes. As a result of inexperienced exposure, the likelihood of final breakdown of the device increases. Or with the condition of additional financing, purchase of damaged items.

Car repairs

To restore operation, in some cases you will have to open the machine, disassemble components and parts, and replace damaged elements (for example, when replacing a bearing). If you are confident in your own abilities, then with the help of recommendations from the video and instructions you can restore it.

Masters involved in repairing household appliances strongly recommend not to take active action in the following situations:

the smell of burning;
smoke from the body.

Important! Failure to comply with safety rules is fraught with life-threatening consequences - electric shock, fire, burns.

If you notice the above life-threatening disorders, then:

disconnect the washing machine from the power system;
put out the fire;
call a specialist.

If there is smoke in the house, immediately open the windows and ventilate the room to avoid poisoning.

Atlant CJSC provides a guarantee for its products (the period can be specified when purchasing household appliances). Therefore, if problems arise during the warranty period, the service center will deal with repair issues with the possibility of a technician visiting your home.

JSC Atlant

If a malfunction was discovered after the established warranty repair period had expired, then for help you should contact trusted specialists who have experience working with these types of household appliances. Only in this case can you be confident in the quality of restoration work.