Hair clipper. Types and work. Application and sharpening

Types of clippers

First you need to understand what type of such device will be the best option for you. It is necessary to carefully read the overview of the features of each of them.

Do not confuse a hair clipper with a trimmer. The main difference between a trimmer and a tool for straightening your hair is that a trimmer is a device for trimming your mustache and beard. Although it is designed the same way.

There are trimmers that are used to remove hair exclusively from the nose and ears.

Vibration motor type

Most often in stores you can see a device for shortening hair with a vibration type motor. This option is the cheapest, and many buyers choose it for cutting hair at home.

This type of device is based on an electromagnetic coil. Such a motor is sometimes called magnetic. It contains a pendulum, which, when connected to the network and the electromagnetic coil is triggered, produces oscillations. These vibrations drive the shearing blades.

There is nothing to break in this device, because everything about it is extremely simple. The noise level of such products is small, but it is there, and there is no great power here. Maximum 15 W.

The two main disadvantages of such mechanisms are vibration and noise. These machines can withstand approximately 20 minutes of continuous operation. Then they start to overheat. Not only their body heats up, but also the cutting knives, which can cause you to get burned.

If the work duration exceeds 20 minutes, and you feel the tool getting hot in your hands, you need to give your electric assistant a rest. Leave it for a while, let it cool down.

Rotary engine type

This device has a real motor - an AC motor. The movement of the knives is determined by a specially designed eccentric. Thanks to the presence of a motor, the power of the device sometimes increases to 45 W.

Due to prolonged operation (more than an hour), the device will, of course, heat up, but unlike its vibration counterpart, only its body will heat up.

The device, which is called rotary, has one big disadvantage. It weighs a lot.

Inexpensive professional hair clippers

In the first selection we will look at 5 professional hair cutting devices from the budget segment. There are many reasons why the prices of hair clippers vary: the dimensions of the device, the quality and size of the knife blocks, the packaging of the product, etc. Therefore, even in the professional segment you can find affordable options.

Moser 1400-0051 Edition

Rating: 4.7

The country of origin of the device is Germany. The case is made in a pleasant retro style, burgundy color. The Moser brand itself is quite widely in demand among beauty salon professionals, and this model itself can often be found in barbershops.

The machine is equipped with a vibration motor that effectively transfers force to the blade for quick and accurate cutting of thick and coarse hair. The durable knife block is made of StarBlade stainless steel, the cutting width is 46 mm.

The regulator in the form of a small lever allows you to choose among seven intermediate settings the desired length for cutting hair - from 0.1 to 3 mm; the height of the knife block of the machine is also adjustable. And when you press the lever in the opposite direction, the knife block returns immediately to the original setting - 0.1 mm. By setting the blade to the minimum cutting length, the machine can be used as a trimmer.

Although it has a fairly standard vibration motor, the Moser 1400-0051 Edition is quite quiet and does not overheat for several hours. And the surprisingly weak vibration throughout the machine does not create discomfort during use.

Using this device, you can not only create haircuts, working with different lengths of hair, but also make edging at the temples and the back of the head. The tool is also convenient for trimming beards, mustaches and removing hair on the ears and nose.

This model has a fairly standard package containing everything you need:

1. hair clipper;
2. universal comb;
3. fixed comb;
4. knife cleaning brush;
5. oil for lubricating blades;
6. protective cover;
7. case.

The case is made of durable plastic that is resistant to accidental impacts. Despite its small size, the machine has quite a significant weight - 520 g. The device operates from a network cable, the length of which is two meters. The machine has a loop for hanging it on a hook.

For the Moser 1400-0051 Edition, you can purchase additional attachments for cutting hair of various lengths, which are not included when purchasing the product. And if the standard knives wear out their service life, you can order a replacement unit.

Advantages

• stainless steel knife block;
• setting up the machine for the trimmer;
• quiet vibration motor;
• weak vibration;
• two meter cable.

Flaws

• no built-in battery;
• heavy weight.

Philips HC5612

Rating: 4.6

The Philips brand does not need any special introduction, but production itself is carried out in Indonesia. The body of the machine is made in a characteristic curved style and has a pleasant blue color. Professional hairdressers often use this model as an auxiliary one, rather than the main one, due to the relative fragility of the device and the impossibility of replacing the knife blocks with larger ones.

The Philips HC5612 machine is equipped with a vibration motor that operates almost silently. The device is designed to work with different lengths of hair, to trim beards, mustaches, and remove hair on the ears and nose. Philips designers have developed an original handle shape for this model; the curvature of the machine allows you to cut hair in hard-to-reach places.

The self-sharpening stainless steel blade block with a cutting width of 41 mm remains sharp for a long time. And thanks to the innovative double-sided cutting unit of DualCut technology, the cutting process is noticeably faster than usual.

In the center there is a wheel-shaped regulator that allows you to select the desired length for cutting hair among 28 settings - from 0.5 to 28 mm. Trim-n-Flow PRO is a specially developed technology that uses an advanced comb to prevent clogging of cut hairs. The body of the tool is waterproof, so it can be washed under water. In addition, the machine does not require blade lubrication.

The model's equipment is not the richest:

1. hair clipper;
2. two hair combs;
3. beard comb;
4. blade cleaning brush.

The device's built-in battery is charged using a power supply connected to the network. Charging time is about 8 hours, after which the machine can work for 75 minutes in autonomous mode. When the battery is low, a special indicator on the bottom of the device's handle lights up.

Advantages

• stainless steel knife block;
• Trim-n-Flow PRO and DualCut technologies;
• waterproof case;
• no blade lubrication required;
• autonomous power supply.

Flaws

• takes a long time to charge;
• fragile body;
• knives cannot be changed.

Rowenta TN-5200

Rating: 4.5

The country of origin of the device is China. The compact hair clipper Rowenta TN-5200 is made of stylish black plastic. Manufacturers of the TN-5200 model recommend the device for hairdressers, emphasizing its versatility. However, versatility is expressed only in the fact that this model, like many others, combines the functions of a haircut itself and a trimmer.

The machine is equipped with a vibration motor. And here, unlike the previous two models in the review, vibration is clearly felt, which may cause the master to experience discomfort. But this is an individual point about which we consider it necessary to warn.

Quick-release blades with a blade width of 42 mm are made of titanium and stainless steel, which makes them ultra-strong and resistant to long-term mechanical stress. Self-sharpening technology keeps the blades sharp for a long time. The knife block does not harm the scalp due to the hypoallergenic coating. And the Turbo function accelerates the speed of the blades, with the help of which the device easily cuts thick hair.

The package includes the following components:

1. hair clipper;
2. cutting comb;
3. comb for trimming beard and mustache;
4. blade cleaning brush;
5. oil for lubricating blades;
6. case.

On the replaceable attachments of the machine there are regulators that allow you to choose among 29 settings the desired length for cutting hair - from 0.5 to 30 mm. This makes it possible not only to cut hair of various lengths, but also to show imagination when trimming your beard and mustache.

Another advantage of the model is its autonomy thanks to the built-in battery. The machine charges quite quickly - it only takes an hour and a half. And the battery life is a total of 2 hours, which is approximately comparable to 8 haircuts without recharging. There is an LED indicator on the case that shows the battery charge level.

The manufacturer of Rowenta TN-5200 has provided wet cleaning of the removable attachments of the device, which saves time after cutting. When purchasing a product, you will receive a bonus case for convenient storage, and the compactness of the device will allow you to take the machine with you on any trip.

Advantages

• titanium blades;
• built-in battery;
• LED indicator;
• Turbo function;
• wet cleaning;
• storage case.

Flaws

• noise and vibration.

GA.MA PRO-8

Rating: 4.4

The country of origin of the device is Italy. The famous Italian brand GA.MA has been producing hair care equipment for many years. This specialization in itself gives rise to a certain degree of confidence in the quality of the model we are considering.

This clipper comes in a nice black color. It has a slightly curved shape, thanks to which it fits comfortably in the palm of your hand, and the brush gets less tired during prolonged use. PRO-8 is well suited for cutting hair both at home and in professional settings.

GA.MA PRO-8 is equipped with a high-quality vibration motor with relatively low vibration rates transmitted to the body. This model is often used in middle-class hairdressers and is valued by hairdressers for its reliability and durability.

This hair clipper is equipped with a wear-resistant and sharp stainless steel blade. This feature, together with the relatively high motor power, significantly adds performance to the PRO-8. The all-metal removable blade block with a 45 mm wide blade contains four length adjustment functions, switched using a small lever on the device body.

By purchasing GA.MA PRO-8, you receive the following equipment:

1. hair clipper;
2. four cutting combs;
3. hair comb;
4. blade cleaning brush;
5. oil for lubricating blades;
6. scissors.

The machine is equipped with four types of combs - from 3 to 13 mm. Each of the attachments allows you to use PRO-8 not only for cutting scalp hair, but also for beards, mustaches and sideburns.

A simple On/Off device switch is built into the body of the machine. The tool is mains powered and equipped with a durable electrical cord. Convenience of storage is provided by a small hanging loop installed on the base of the electrical wire.

Advantages

• durable knife;
• low noise motor with low vibration;
• reliability and durability;
• performance;
• good equipment;
• relatively light weight.

Flaws

• no built-in battery;
• case missing.

DEWAL 03-012

Rating: 4.3

The country of origin of the device is Germany. Products from Dewal are widely known all over the world and have long gained their fans among hairdressers and stylists. Professional tools of this brand attract with their build quality, design, and, most importantly, affordable price.

Of the five hair clippers that we are considering in this selection, Dewal 03-012 is higher quality and technically advanced. Here we no longer have a vibration engine, but a rotary engine with all its advantages - high performance and minimal noise.

This modern machine is often used by hairdressers and barbers to perform edging, but it also copes with hair cutting more than well. The device is equipped with a high-quality knife block with a width of 28 mm, made of stainless steel. It provides the most even cut possible.

The length of the haircut is adjusted by changing one of four attachments and a switch in the form of a chrome slider, which is fixed in three positions. The length of the hair cut varies from 1 to 12 mm. And the built-in Turbo mode speeds up the cutting process with one click.

When purchasing a product, as a bonus you receive another removable knife block, with a narrow cutting surface and a coverage width of 6 mm. For stylists and professional barbers, such a knife block is indispensable, as it is excellent for shaping the contours of a beard and mustache.

The model's equipment is quite good:

1. hair clipper;
2. 4 combs;
3. replaceable knife;
4. charger with stand;
5. oil for lubricating blades;
6. blade cleaning brush.

The machine is also perfect for children's haircuts due to its low noise level and low vibration. The device is very light - only 140 g, it is pleasant and comfortable to hold in your hand, working throughout the day. Thanks to the Soft Touch coating and ribbing on the sides, the machine does not slip in the palm of your hand.

This model has a built-in battery, which is charged using a special stand for 5 hours. Also, if necessary, the machine can be used directly from the network.

Dewal 03-012 has a nice design. At the base of the handle there is a round color display showing information about the remaining operating time and the current mode. The buttons for turning on the instrument On/Off and Turbo mode look nice, which are additionally illuminated with bright backlighting.

Advantages

• compact;
• rotary engine;
• performance;
• slight noise and vibration;
• the charge lasts for a long time;
• sharp blades;
• spare knife block;
• Can work both from battery and from mains.

Flaws

• long-term battery charging - about 5 hours;
• no storage case.

Power type

The main feature by which all machines differ is the type of power supply. There are devices that operate from a wall outlet, as well as battery-powered options.

Mains powered machines

Network-powered devices have three main advantages:

• long uninterrupted service;
• are cheaper;
• “live” longer because there is no risk that the battery will fail.

There were also some drawbacks:

• you are tied to the location of the outlet;
• When there is a power outage, activities stop.

If your choice is a similar type, then carefully consider the choice of cable. It is worth choosing a long wire (at least 1.5 m). The cord must be flexible and secured with a swivel joint. This will prevent the wire from getting twisted and tangled at the junction with the device.

Rechargeable hair trimmers

Such devices have many advantages. They:

• lungs;
• have no vibration;
• do not make noise when used;
• equipped with quick-release knives that can be easily replaced with more suitable ones.

Disadvantages of battery devices:

• battery charging takes quite a long time (sometimes about eight hours),
• short work (30-50 minutes),
• unreliable quality of charger cables.

Cordless types of the device are useful when working away from an electrical outlet. You need to select them based on the same parameters as regular wired ones. The manufacturer is obliged to warn the user, indicating the time it takes to fully charge the battery and its battery life.

If you do not want to sacrifice either convenience or the duration of the session, then buy universal equipment. It can work both from a power outlet and from a battery. True, you will have to pay more for it.

Professional hair clippers in the mid-price category

In this selection we will look at 4 professional hair cutting devices from the mid-price category. Devices in this segment are equipped with a more powerful motor and have additional functions that allow the tools to work smoothly and with maximum comfort.

Moser 1661-0460 TrendCut Li+

Rating: 4.9

The country of origin of the device is Hungary. This machine comes in black color with a very compact body. The device is perfect for cutting hair at home and in hair salons with low traffic. The 1661-0460 TrendCut Li+ is also used for cutting children’s hair; due to the installed rotary motor with a noise reduction system, it does not cause discomfort to children. The machine operates without significant vibrations and does not overheat for a long time.

The model's equipment is pleasantly surprising:

1. hair clipper;
2. 10 replaceable combs;
3. oil for lubricating blades;
4. blade cleaning brush;
5. scissors;
6. comb;
7. haircut cape;
8. bag for storing the device.

The removable knife block of the device is made of Magic Blade stainless steel with a blade width of 40 mm and chrome plated to protect against corrosion. The minimum blade installation length is 0.7 mm. Also suitable for the machine is a knife block for performing contours Moser 1450-7310 Medical Contour, with a blade size of 0.1 mm. This hair edging blade block is purchased separately from the Moser 1661-0460 TrendCut Li+ kit.

By installing additional attachments, the device can be used as a full-fledged trimmer. Using an edging knife block, trim the beard, mustache and sideburns. The device does not have a button for adjusting the settings, so you can change the length of the hair cut by replacing the comb. The set includes 10 nozzles - from 1.5 mm to 25 mm.

The oblong ON button with a small built-in indicator is made in the style of a Parker fountain pen. And the ribbed surface of the switch increases the convenience of the work process, eliminating accidental shutdown. The lower part of the handle, made of embossed plastic, will not allow the machine to slip out of the palm.

This model operates both from a built-in battery and from the mains. An innovation for the Moser line is a lithium battery that can be charged at any time without waiting for the device to completely discharge. When the battery is fully charged, the machine works for an hour and a half in autonomous mode. The device charges to 100 percent in 4 hours. The LED panel indicates the battery charge level.

Advantages

• a set of replaceable combs;
• comfortable ergonomic shape;
• holds a charge for a long time;
• motor with noise suppression system;
• excellent equipment;
• runs on battery or mains power.

Flaws

• narrow knife block.

Andis AAC-1

Rating: 4.8

The country of origin of the device is the USA. It is not only powerful, but also incredibly stylish. The spectacular brutal design of Andis AAC-1 attracts from the first minutes, and the technical characteristics harmoniously complement the external data of the model. This tool is a favorite of many barbers. The model can often be found in hairdressing salons with a large flow of clients.

This is a machine with a vibration type motor, but which uses XTR technology. This is an innovative development to effectively reduce the temperature and noise of the motor, and it gives the model strong advantages. The engine really runs quietly and does not overheat even under intense loads.

The Andis AAC-1 package includes:

1. hair clipper;
2. oil for lubricating blades;
3. 9 combs;
4. protective cover for the knife block.

When you purchase this product, you will receive chrome-plated, corrosion-resistant Blade Set 69115 blades made from durable carbon-rich steel. The machine does not have a function for quickly changing knives; they are attached to screws.

The length of the blades varies due to the side lever - from 0.5 to 2.4 mm. The blade block with an ideal cutting width of 45 mm changes the length of the cut, due to which you can use the popular cutting technique called “fading”. The blade easily and quickly deals with thick and coarse hair.

During the cutting process, you can use any of 9 cutting levels from 0 to 25 mm by installing plastic combs. The attachments are secured with a reliable Snap On mechanism, which easily prevents the common problem of attachments jumping off when cutting.

The Andis AAC-1 machine runs on mains power, but due to the standard 2.7-meter cable, there is no discomfort during the work process. However, some users are unhappy with the lack of a battery. Like most models of this type, there is a hanging loop.

The body of the machine is made of matte-glossy plastic, quite durable and comfortable. And the narrowed aluminum alloy handle is comfortable to hold in your hand. The metal lid removes heat well, reducing the heating of the machine when using the device throughout the day.

Advantages

• large selection of attachments;
• wide knife block;
• long cord;
• spectacular design;
• quiet operation;
• effectively prevent overheating.

Flaws

• no built-in battery;
• no cover.

Oster 616-91

Rating: 4.8

The country of origin of the device is the USA. Model 616-91 is one of the most famous and time-tested. This, without exaggeration, is a real legend whose appearance and design are so perfect that they have not undergone major changes for many years and even decades. Many professionals have used this vintage device at least once.

One of the key features of this model is a pair of removable alloy steel knives - 0.25 mm and 2.4 mm. This simple solution is highly valued by barbers, as these blades are the most practical when working with any type of haircut. The model is equipped with a high-quality vibration motor, which guarantees uninterrupted and powerful operation of the device.

Oster 616-91 is a vibrating machine with a removable knife, and this is another advantage. It can also be used effectively as an edging tool. The device is designed for use throughout the day without interruption. Reduced noise and vibration levels contribute to comfortable work for the technician.

Many professionals, even after many years, remain adherents of this model, because of its external simplicity and ease of use. With new and new batches the composition and quality of components does not deteriorate at all:

1. hair clipper;
2. oil for lubricating blades;
3. blade cleaning brush;
4. 2 knives;
5. 3 combs;
6. cover for replacement knife.

The machine is sold complete with the latest precision-machined knife blocks made of alloy steel with the addition of titanium. Quick-release blades allow you to install any knives in one motion and make cleaning the device and the blocks themselves extremely easy.

The coverage width of standard knife blocks is 46 mm and 49 mm, and the cutting length is from 0.1 to 4.5 mm. Also a nice bonus for any hairdresser are thinning blades. And with the help of three attachments with sizes of 6, 9 and 12 mm, you can not only trim your beard and temples, but also create an excellent hairstyle working with any hair length.

The On/Off button is located on the side of the device handle. The machine runs on mains power, but the 2.8-meter cable allows you to comfortably use the tool without worrying about limiting your freedom of movement. The body is quite durable, most of it is made of metal. The model also has a loop for hanging.

Advantages

• a legendary model, tested by time and generations of craftsmen;
• several knife blocks;
• durable body;
• “perpetual” motor;
• durable blades;
• moderate noise and vibration;
• good set.

Flaws

• no built-in battery;
• no case.

Oster 616-50 Soft Touch

Rating: 4.7

Another hair clipper from Oster, series 616, equipped with all the necessary functions for comfortable work with hair of any type and hardness. The country of origin of the device is the USA.

This model has significant similarities with the previous version, but there are also differences. This model was made into a limited edition by “pumping up” its external components. The durable handle with a special anti-slip Soft Touch coating ensures maximum grip security. Another difference of the model was its modern design. The technical specifications have not been changed.

Among professional hair clippers in the mid-price category, the Oster 616-91 and Oster 616-50 models can easily be called “top” tools. The modern type of vibration motor device ensures long-term operation without breakdowns. The machine makes little noise and almost does not vibrate during use, and its motor prevents the possibility of overheating.

The model kit includes:

1. hair clipper;
2. 2 knife blocks;
3. 3 combs;
4. blade cleaning brush;
5. oil for lubricating blades;
6. protection of the standard blade.

The width of the knife block of the device in coverage is 46 mm. Both blades of the machine with anti-corrosion coating are made of high-quality stainless steel. They are suitable for both simple cutting and edging. The minimum cutting height is 0.25 mm, and the maximum is 2.4 mm. It is possible to adjust the cutting height of the knives by adjusting the clamping screws. There is no lever on the device to adjust the length of the haircut. Adjustment occurs by changing the nozzles; there are three of them in the set - 6, 9 and 12 mm.

This model runs on mains power only. The length of the wire is almost a record in this class - 3 meters. The case has a metal loop for hanging and a side power button, just like the model discussed above. The weight of the machine is quite impressive - 560 g.

Advantages

• several knife blocks;
• durable body;
• “perpetual” motor;
• durable blades;
• minimal vibration and noise;
• Soft Touch coating;
• 3 meter wire.

Flaws

• no built-in battery;
• significant weight.

Shortening hair using an attachment

For example, you need to cut a haircut for a person with thick hair. You have a set of attachments at your disposal. As a rule, the sizes of these plastic devices are as follows: the smallest is 3 mm (it is very easy for her to cut hair), and the largest is 12 mm. As a rule, the size of each nozzle is indicated on it by the manufacturer.

Fast operation of the tool with a nozzle requires a power of at least 10 - 15 W from the cutting device. It is much better when it has a rotary type of motor. However, vibration machines from Oster, for example model 616, which has a power of only 9 W, are able to cope with such a task.

In the case when you use a cutting tool that has little power, the advice of a professional will be important. This tip is this: if you need to deal with very thick and long hair, the first thing you need to do is pick up a pair of scissors.

Separate the strands and shorten them along their entire length in a chaotic manner. At the same time, you do not need to monitor the accuracy of the cut - now you are only helping your electric assistant. A little later, you will put the attachment on the cutting knife, walk with it over the uneven areas and smooth them out.

Contrary to popular belief, coarse hair can be cut with an electric clipper much easier than fine, fluff-like hair. Children's hair, as well as the hair of older people, is often thin and soft.

Housing, ergonomics, design

Appearance for such a device is far from the most important parameter. Nevertheless, it is always much more pleasant to hold in your hands a high-quality, stylish machine that is assembled wisely, using reliable and environmentally friendly materials.

As a rule, modern hair clippers are made of plastic. It is clear that this material varies significantly in its strength and durability. You can tell cheap plastic by its appearance. Plus, it smells bad. High-quality material looks monolithic, has no pungent odor and has increased strength.

A number of manufacturers produce models made of special lightweight metal. Such machines are much stronger, but also much more expensive.

In order for the device to be convenient to operate, it must have good ergonomics. The controls can be located either on the side or on the top. Rubberized pads prevent the risk of the machine slipping, which is especially dangerous during operation. The shape should help securely grasp the body, and not interfere with this.

There is no need to buy devices that have tacky design elements and unusual shapes. They are inconvenient to operate and your hand may get tired. Don’t be too lazy to look for a machine with rubberized pads or a soft-touch coating - they stick well in your hand and don’t slip. A device that suddenly falls out of your hand can not only fall and break, but also injure a person with sharp knives.

Models with Soft touch coating

• 8 070 ₽

  10 770

  -25%

  Valera Vario Pro 7.0 Hair clipper, cordless, rotary, cut 0.8 - 20 mm

  Article: VP 7.0

  Add to cart

  Available: Tomorrow

• 3

  10 580 ₽

  11 750

  -10%

  Oster 616-50 Soft Touch Clipper, vibrating, mains, 9 W, 2 knives, cut 0.25 - 13 mm

  Article: 616-50

  Add to cart

  Available: Today

• 7 210 ₽

  8 020

  -10%

  Andis RT-1 SuperLiner 04820 Edging machine, network, 12 W, 0.1 mm cut, 4 attachments

  Article: 04820

  Add to cart

  Available: Tomorrow

Manufacturers

Moser and have proven themselves well in beauty salons .

The instruments of the American company Oster have very positive characteristics . It's a good choice.

There are no Russian companies among the manufacturers of such products. Such devices are not produced in Russia.

Chinese companies will be able to please the buyer at a low price. Unfortunately, all such tools made in China have low power and a vibration motor. Do not forget that you are not purchasing a device for one day, so its capabilities will be important to you.

What is the price

As a rule, the price of these products does not depend on their type and power. For example, a professional vibration machine Oster 616 can be purchased for 7,790 rubles, and a rotary Moser Genio 1565-0077 will cost only 5,960 rubles.

It's all about the packaging and various useful functions. The price of high-quality electrical appliances of this type ranges from 3,000 to 11,000 rubles.

Do not purchase such products if they are of low cost (RUB 1,000 or less). They have a vibration motor and low power. None of the parameters you need will be found in the printed instructions accompanying the product.

In cases where important characteristics are not specified by the manufacturer, be careful!

It is possible that a cheap tool will please you at first, but it will quickly cease to perform its main function. Often such devices cannot be repaired.

Where can I buy

Buy electrical products intended for shortening hair in stores or departments of large shopping centers that stock professional hairdressing tools. Online stores will be happy to offer the purchase of such a device for home use. The best option is the one that suits you.

Go to these addresses, check out the assortment (the links lead directly to product selections - open and choose):

• Eldorado - the cheapest car costs 395 rubles.
• Citylink - the selection includes 28 pages with products.
• Polaris is the official store of the manufacturer.

Types of cars by motor type

The motor is the heart of any machine, and it determines how powerful it will be, how fast the knife will move and, accordingly, how smoothly and accurately it will cut hair.

In order to feel confident in the store when purchasing a professional hairdressing tool, we recommend that you remember the two main types of motors - rotary and vibration .

Rotary cars

The name “rotary” comes from the English verb to rotate

- rotate, move in a circle. The main driving element of the motor, called the “rotor,” performs rotational movements and transmits impulse to the knife. Rotary motors are quieter, have more power and durability compared to vibration motors, but they are also more expensive. In our opinion, this is quite fair - such characteristics justify their price.

Vibrating machines

A vibration motor, unlike a rotary motor, produces more noise and has less power. True, vibrating clippers cost less than rotary ones, which makes them a very attractive option in the eyes of a novice hairdresser. At first, a vibrating hair clipper is indeed a good tool, but for intensive work with a large flow of clients, this type of clipper is not very suitable.

Rating of the best cars

You can purchase hair trimming equipment at a very affordable price. Although it would be unfair to demand impeccable service from a cheap copy. Still, they get dull and break faster than their more expensive counterparts. Therefore, decide what is more important to you: durability and quality or price.

Please take a look at this option.

Philips HC3522/15 Hairclipper Series 3000 – sample for 3,400 rubles. It has a comb with which you can adjust the shortening from 1 to 23 mm. When used without it, the length is only 0.5 mm. With a charged battery, the period of uninterrupted operation is 75 minutes. Stainless steel blades with double sharpening have self-sharpening properties.

Pros:

• does not require lubrication;
• comb design prevents clogging;
• the blade can be washed with water;
• operates for a long time on a single charge.

Minuses:

• over time, the capacity of the energy source decreases;
• It is inconvenient to switch settings with one hand.

Five more popular models:

1. Braun NS 5090 for 6,990 rubles.
2. Rowenta Driver TN1600F0 for RUB 1,290.
3. Philips HC3535/15 for RUB 3,090.
4. Moser 1400-0451 for RUB 1,990.
5. Philips HC3504/15 for RUB 1,990.