Device

Trimmers are popularly called electric mowers.
The trimmers are equipped with a strap that allows you to hold them on your shoulder while working. The main purpose of electric mowers is to cut grass in difficult landscape areas. Trimmers can also be used to trim bush branches.

A cord, which is a fishing line or string, is used for cutting grass. The branches are cut using a disk equipped with blades or knife attachments. During the mowing process, the grass or branches are thrown to the left by the spindle rotating counterclockwise.

Main design elements:

• Barbell . It can have two versions: telescopic and sliding. In the middle of the shaft there is a handle with a start and stop button, designed to hold the trimmer during operation. The rod is adjustable in angle of inclination.
• Belt system . Designed to reduce the load on the trimmer's hand during operation. The shoulder straps are adjustable in length.
• Working head . For safe operation, it is covered with a protective cover that separates the cutting attachment from the mower’s legs.

Electric mowers consist of an engine with a long rod attached to it, at the end of which a cutting mechanism is attached. Inside the rod there is a shaft that transmits the driving impulse from the engine to the cutting mechanism. It can be flexible or rigid.

The structure of an electric trimmer.

The driving impulse can be transmitted in three ways:

1. Through sequential coupling of parts.
2. Via flexible shaft.
3. Directly from the motor shaft to the spindle.

The rotation speed of the cutting mechanism of various models is from 3000 to 12000 rpm.

Assembling the trimmer in STEPS

Preparing the trimmer for use is quite simple - let's do it in FOUR
simple
STEPS
.

STEP 1: Attach the tool handle

1. Unscrew the thumbscrew 2. Remove the top cover of the fastener

3. Insert the handle into the fastener

4. Install the cover

5. Tighten the screw

To adjust the handle, you need to loosen the thumb and move it.
Then you should fix the screw. FUBAG electric trimmers are equipped with rubberized handles, which increases convenience and safety of use. They allow you to hold the instrument securely even in wet hands.

STEP 2: Install the protective cover

1. Align the holes in the protective casing and in the fastening bar.

2. Secure the casing to the bar with screws and washers using the key included in the kit.

In this model, the casing is secured with metal plates on both sides.
This guarantees additional reliability and durability of the trimmer. The casing itself is made of dense but flexible plastic. Such material will definitely not break off when hitting small obstacles. We advise you to pay attention to this if you are just going to choose an electric trimmer or a gas trimmer.

STEP 3: Attach the shoulder strap

One of the simplest manipulations when assembling an electric trimmer.
Many people will understand how to attach the shoulder strap intuitively. For those who are not sure, we decided to add several important points to the instructions: 1. Connect the carabiner with the ring for attaching the belt 2. Adjust the position of the fastening ring on the bar 3. Fix the ring with the fastening screw

STEP 4: Install the line spool

1. To begin, align the hole on the washer with the hole in the gearbox cup and lock it with a special rod.

2. Unscrew the fastening nut from the hub clockwise. 3. Remove the cup from the shaft and the pressure washer

Important! We leave the flange washer.

4. Twist the spool of fishing line counterclockwise until it stops, holding the rod.

When choosing a trimmer, you should take into account the quality of the spool included in the kit. Often, it is the coil that becomes the subject of savings to reduce the overall price of the product. How to identify a deficiency? A good spool is of high quality plastic, opens easily and allows you to thread the line without much difficulty.

Features of electric mowers

Electric grass trimmers operate on 220 V mains voltage. The range of such devices is limited by the length of the cable. Autonomous devices are equipped with a rechargeable battery. This equipment can work without recharging for 20-25 minutes. According to the type of power supply, trimmers are divided into stationary and autonomous.

According to the type of cutting device, electric mowers with fishing line, knives and discs are distinguished. Designs are also divided according to the location of the engine. It can be top or bottom.

Devices are classified by class:

• Household.
• Semi-professional.
• Professional.

Advantages and disadvantages

Electric mowers have a number of unconditional pros and cons.
The benefits include:

• Compact and simple design. It is convenient to store the products in disassembled form.
• Maneuverability and the ability to cut grass in places that are difficult for lawn mowers to reach.
• Ability to mow grass and trim bushes.
• Light weight.
• No gasoline emissions.

Flaws:

• The need for regular maintenance
• Increased noise level during operation;
• Low power.

To ensure an even cut of the grass, the device must be held in a level position for a long time, which puts a lot of stress on the mower’s hand.

Best models for grass

The rating is based on the opinions of experts and the popularity of devices among users. It includes stationary and stand-alone devices.

Bosch ART 26 SL

An economy class model with good technical characteristics. The engine power of the Bosch ART 26 SL is designed for mowing grass in small areas with difficult terrain. Cutting width – 26 cm. Cutting element – ​​fishing line. Engine power – 280 W. The average cost of the model is 2500 rubles. The assembled weight of the Bosch ART 26 SL is 2.25 kg.

Advantages:

• Low cost.
• Availability of automatic launch system Semi-Auto Feed.
• High quality grass cutting.
• Reliable cutting mechanism design.

The model has no obvious shortcomings.

• Ivan R. review:

The power and thickness of the fishing line is not enough to mow grass with thick stems. I like the fact that the electric mower is the size of a plastic bag.

Huter GET-600

Economy class model. The average cost is 2200 rubles. Designed for summer cottages. Grass cutting width – 32 cm. Motor power 600 W. The cutting element is a fishing line. It is easily replaced thanks to the push reel. Huter GET-600 copes well with short grass. The weight of the assembled product is 2.3 kg.

Advantages:

• Quiet operation.
• Maneuverability.
• Easy to assemble and disassemble.
• Good power.

No disadvantages have been identified in the Huter GET-600 model.

• Anton U. review:

What I like about the trimmer is how easy it is to assemble and disassemble. But the original fishing line is no good. You need to immediately change it to 2 mm. The length of the handle is too small for people whose height is more than 175 cm.

Daewoo DATR 450E

The average cost of the model is 2000 rubles. Model with a motor located at the bottom of the device. Assembled weight – 1.48 kg. grass cutting width – 22.8 cm. Daewoo DATR 450E cannot be used for cutting grass in wet areas. This is the main disadvantage of the trimmer. The telescopic rod allows you to adjust the length of the holder. Maximum device speed is 1200 rpm.

Advantages:

• Compactness.
• Light weight.
• Possibility of adjusting the length of the holder.
• Good balancing.

Igor Zh. review:

Lightweight, silent model. Very convenient to adjust the length.

Interskol MKE-30/500

The model is equipped with a non-collapsible telescopic collapsible rod with a movable handle. Power Interskol MKE-30/500 has a power of 500 W. Grass cutting width 30 cm. Cutting head rotation speed – 9500 rpm. The cutting tool is a fishing line. Assembled weight 2 kg. The average cost is 2500 rubles.

Advantages:

• Low noise and vibration levels during operation.
• Good balancing.
• The presence of a cable holder in the design.
• Compactness.
• Light weight.

The main disadvantage is low power.

• Sergey I. review:

Thanks to the folding rod, it is convenient to transport the electric mower in the trunk of a car. The big minus is the lack of a hanging strap. The power button is not fixed. Copes well with weeds with thick stems.

Denzel TE-1200

Stationary electric mower with engine power of 1200 W. The grass cutting width is 38 cm. The weight of the assembled product is 4.7 kg. Denzel TE-1200 is equipped with a carrying strap. Rotation speed of the cutting element is 7000 rpm. The average cost of a product is 4,700 rubles.

Advantages:

• Reliability of the design.
• High performance.

Disadvantage: limited range.

• Mikhail Sh. review:

Copes well with mowing tall grass. After 2-3 hours of continuous operation, vibration begins to be felt.

Greenworks 1200W GST1246

The average cost of the product is 6990 rubles. The model is distinguished by a reliable, good quality cutting part. The trimmer easily copes with thick weed stems. The line has an automatic feed. The cutting width is 41 cm. The design is equipped with a protection system against accidental activation. Model weight 4.5 kg. Motor power 1200 W.

Dignity:

• High performance.
• Reliability of the design.

The main disadvantage is the high noise level during operation.

• Yuri E. review:

During prolonged operation, the engine does not overheat. You can change the width of the grass cut.

Stavr TE-1700R

The average cost of the product is 4500 rubles. The model is very quiet. Engine power 1700 W. Rotation speed 10000 rpm. Weight 6 kg. The width of the grass cut is 23 cm. The weight of the assembled product is 8 kg.

Advantages:

• High performance.
• Reliable assembly.

The main disadvantage is the heavy weight.

Alexander Sh. review:

Excellent cutting quality. When installing knives, it is able to cope with bush branches with a thickness of 5 mm.

What is a gasoline trimmer?

The tool is a fuel-powered scythe. It is used for cutting ornamental grass and weeds, as well as for cutting hay. A gasoline-powered trimmer copes with the tasks without any problems, while it is lightweight and easy to maintain, and does not require much storage space. Some models are equipped with additional functions, making it possible to cut small branches of trees and shrubs. There are options that, in addition to their main purpose, can be used, for example, for removing snow and cleaning paths.

Gasoline trimmer device

Weed control is carried out in different ways, one of the quickest is mowing the grass with a mower. Today there are various modifications on sale, endowed with numerous functions. Modern gasoline lawn mowers consist of the following components:

• engine;
• hose;
• control knobs;
• heads;
• drive;
• cutting tool;
• protection.

Characteristics of a gasoline trimmer

When purchasing a particular tool, pay attention to the design and technical equipment. The gasoline trimmer has the following parameters:

1. Engine's type
   . It can be two-stroke (2T) or four-stroke (4T). The second one is quieter and vibrates less, but costs more.
2. Power
   . The indicator determines what loads the equipment will withstand. A device with a power of 175-550 W can only cope with thin lawn grass; to remove coarse, thick and wet weeds, a power of 600-1000 W is needed.
3. Cutting part
   . The equipment used is a fishing line, a knife or a disk. The width of the treatment and, as a result, the speed of removing thickets depends on the type chosen. A gasoline lawn mower, thanks to the disc as a cutting tool, processes the selected area faster.
4. Design and ergonomics
   . The weight of the device can range from 4 to 9 kg. This indicator is affected by the volume of the engine and gas tank. Comfort depends on the type of strap and handle. Lightweight models are equipped with a loop-shaped handle and more powerful ones with an ergonomic bicycle-type handle.

How to choose?

When choosing products, buyers pay attention to 3 main indicators:

• Manufacturer's warranty.

• Price.
• Performance.

Expert opinion

Kuznetsov Vasily Stepanovich

The cutting speed and the ability to use trimmers depend on the width of the grass cut. Electric mowers cope with work in the country, with an engine power of 0.3-0.7 kW and a cutting element rotation speed of 6000-7000 rpm.

Do you already have experience cutting grass with an electric mower?

Of course I want to try

How to choose a trimmer - tips for beginner gardeners

To choose a trimmer for mowing grass, you should first study the characteristics of the selected model, as well as determine the conditions in which the tool will be used.

The main parameters of each brush cutter include:

• power - this indicator is measured in kW. The speed of operation of the scythe in different operating conditions depends on it. The higher this parameter, the faster the standard cutting element rotates, and the larger the area that can be mowed. As a rule, an electric or brush cutter with a power of 0.25 to 1.8 kW is suitable for household use. For use by utility workers, a more powerful trimmer with an output of 1 to 2.5 kW is suitable. For mowing lawns in small areas, it is best to choose a mini trimmer with a power of no more than 0.7 kW;
• engine speed - this parameter also affects the speed of the garden scythe. For low power models it is less than 7000 rpm. A professional trimmer is capable of operating at speeds from 7500 to 12000 rpm. For operation in small local areas, the best option is a tool operating at a speed of 6000 rpm, and for operation in large areas of various enterprises, models whose operating speed ranges from 9000 to 1200 rpm are suitable;
• grip diameter - this parameter depends on the length of the cutting knife and the possibility of maximum line extension. At the same time, the cutting width is limited by the dimensions of the plastic casing. For working on large areas, a walk-behind mower is suitable, capable of covering from 30 to 42 cm of area. For mowing grass in small areas, a hand tool with a working width of 25–27 cm is suitable;
• weight – the convenience of long-term use of the tool depends on this indicator. The weight of most models ranges from 1.5–9 kg. Household electric scythes weigh the least. Gasoline models, due to their higher power and the presence of additional mechanisms, weigh an order of magnitude more. If the gardener has the ability to connect the trimmer to the electrical network, then for working on the site it is best to choose a model weighing no more than 5 kg. If this is not possible, then you can buy a lawn mower weighing up to 7–8 kg.

The choice of a trimmer is also influenced by the ability to use different cutting elements to work with it. The universal tool can be used to install not only a mowing reel with fishing line, but also a cutting knife. This model is suitable not only for grass, but also for hay.