How to remove a bra wire from a washing machine 2Stiralki.ru

A modern washing machine is an indispensable assistant in the home. She will wash and almost dry the clothes, and some models will also iron them. But it often happens that, along with the laundry, various kinds of objects get into the tank and remain there: coins that fell out of a pocket, torn buttons, rivets, or a bone from a bra got into the washing machine. And if a small object is less dangerous for the internal parts of the device, then a piece of women's underwear, due to its shape, can cause great harm. How to remove a bra wire from the washing machine? Of course, you can call a qualified technician, he will revive the machine in a matter of minutes. The cost of such a service will be from 1000 rubles, depending on the city and service center. But if you wish, you can save on the services of a specialist and solve the problem yourself.

What kind of damage can a bra wire cause?

The danger with this part is that it is narrow, so it can easily leak through the drum hole directly to the bottom of the tank. When the drum rotates quickly, the bone in the tank may become sideways, creating a hole that will cause a leak;
The bone can simply tear off the heating element, standing between it and the tank;
It (less often than the two previous cases, if we analyze our experience) can pierce the cuff of the hatch - the machine will begin to constantly leak when washing;
A metal pit (if not removed in time) can stain the laundry a rust color and partially block the drum, causing the system to malfunction.

This is interesting: The washing machine draws water but does not wash

What to do if a bra wire gets into the machine?

You need to be wary when you hear your machine suddenly begin to make atypical and unusual sounds: metal knocking on metal or grinding. At this point, washing should be forcibly stopped to minimize possible harm. The water (if any) must be drained, and things must be taken out. And be sure to carefully check all the laundry removed from the machine. Maybe you'll get lucky and the bone will get stuck in it. The problem will be solved very quickly.

If this does not happen, you can begin to search for what kind of foreign object got into the machine and where it is located. You need to stock up on an ordinary flashlight, patience and some free time. We must try to look inside and, slowly turning the drum, inspect as much space as possible. As a rule, the bone:

remains at the bottom of the drum or in its perforations,
falls to the bottom of the tank,
due to its non-standard configuration, it gets stuck between the drum and the tank,
rarely, but still ends up in the pump, filter or drain pipe.

The choice of methods for extracting a dangerous loss depends on where exactly it ended up. Only after determining its location can you think about how to get the bra wire out of the washing machine. With a prompt reaction and quick stop of the equipment, the chances of preventing a foreign object from getting into hard-to-reach places increase.

Removing through the drum

But the choice of any solution to the problem should begin with the fact that you disconnect the machine from the network. These are basic safety measures.

Perhaps one of the best options is if the bones get into the drum. In this case, removing them is much easier. Then slowly rotate the drum and, feeling with your hand, carefully check its entire inner surface. It does not matter what brand the unit is - Samsung, Bosch or Indesit. The operating principle of this method of removing a foreign object from a washing machine is approximately the same.

Why check by hand? The fact is that it is sometimes difficult to notice a metal bone on the metal surface of the drum. If it is lying in the drum, we carefully take the part, pull it out and consider ourselves really lucky.

Is it necessary to promptly remove the bone from the machine?

There is one subtlety in this case: there are also cases when a bone gets into the washing machine, but does not cause a grinding noise. And this does not affect the operation of the equipment in any way.

However, some time will pass and the car may begin to rust. This will become clear by the fact that red spots will appear on clothes and underwear. Another problem is also possible. The bone may move and cause the machine to break. That’s why, if a piece of laundry gets lost after washing, it’s better to immediately think about how to remove the bra wire from the washing machine.

It is important to assess the possible harm to the washing machine if a bone is stuck in it. It is also important to understand what it is made of and what material it is made of. The further method of removing the bone, as well as where it may be located in the machine, also depends on this.

The parts of the bra cups, made of plastic, are quite harmless. In the sense that the bones are flexible. And they cannot do much damage to the washing machine. No drum, no tank. In many cases, such bones break. Their pieces settle in the drain filter.

IMPORTANT! But the “spare parts” of a metal bra can most likely damage the mechanisms. However, there is one good way to solve the problem. You can remove the metal bra wire from the washing machine using a magnet.

What danger does a stuck bone pose to the machine:

“It can slip under the drum, stand across and pierce the wall of the tank. After this, the machine will leak. You cannot handle such repairs on your own. You'll have to call a specialist.

— The bone can catch on one edge of the heating element, and the other on the drum. In this case, when the drum rotates at high speed, damage to the heating element is possible. Moreover, although rarely, it happens that the heating element even comes off.

— The bone can easily pierce the sealing cuff of the hatch, since it is rubber. And this will require replacing the cuff.

— If a wire from a bra gets into the drum of a washing machine, it may jam. If this happens, the machine will display a message indicating that an error has occurred.

How to remove a bone from a machine depends on the material

Underwires made from different materials are inserted into women's confinement underwear. They come in both plastic and metal.

Iron elements can cause more serious damage to the parts of the washing machine, but you can also try to get them out using a magnet without disassembling the device. While to remove the plastic bone you will have to disassemble the washing machine. But if a bone from a plastic bra gets into the washing machine, it will not cause much harm, since it is flexible and soft compared to metal. But in any case, you will have to work hard to remove the foreign object from the device. So, the bra wire ended up in the washer. How to get it out? This can be done in several ways, depending on what part of the device it is located in.

Solving the problem yourself

If the user discovers that the bra wire is missing, it is worth trying to find the missing item yourself:

Carefully examine other items of clothing that were washed along with the bra.
At the end of washing or an emergency stop of the washing machine, you should carefully inspect the drum. Very often foreign objects get into the holes in the drum.
You can also look for the wire from the bra in the sealing cuff and be prepared for the fact that the element will have to be replaced.

To answer the question of how to remove a bone from a washing machine without disassembling it, you first need to understand where it might be. You can try to remove the bone from the hole in the heating element or in the drain pipe yourself. In more than 85% of cases, the missing bra wire is “hidden” in the location of the heating element. However, independent actions are desirable if the heating element is located on the rear wall of the machine:

We turn the unit with the back wall towards us and unscrew the screws.
After removing the back wall, you will see the drum wheel itself, and at the bottom there is a heating element; you must first disconnect the power wires.
Then loosen the nut that holds the heating element. Carefully remove the heating element by shaking it in different directions.
How to remove a bone from a washing machine through the hole in the heating element? It will be more convenient to use pliers.
Finally, we install the heating element back and connect the wires.

Before you try to remove the wire from your bra through the drain, you need to disconnect the machine from the electricity and make sure that the water is drained. After this, you can start searching for a foreign object:

First, you need to remove the powder receptacle and put the machine on its side, since in most models you can only get to the drain pipe through the bottom.
Next, you need to unscrew the bottom of the washing unit, which usually has special latches.
When you see the drain pipe, you will need to remove it by first unscrewing the clamps.
Remove the missing bone and other foreign objects that have fallen into the pipe.
Rinse the pipe under running water and replace it.

A foreign object in the washing machine could not be detected, but the extraneous sounds are only getting stronger? This means that you will need to completely disassemble the household appliance, and doing it yourself is not the wisest decision. It is much safer and more reliable to contact a service center, where they will promptly help you and advise you on the rules for washing women’s underwear.

How to remove the bodice insert from the machine yourself?

Removing a foreign body from a washing machine occurs in one of three main ways:

Without disassembling the device
Through the cavity for the heating element
From the drain

How to remove a bone from a washing machine is determined based on the model and the results of the camera examination.

Without disassembling the case

If during the inspection a bone was identified in the opening of the tank, you can try to remove it without opening the device. To do this, take a hook, a knitting needle bent in an arc, or a stiff wire. The tool is threaded into the hole, the part of the bra frame is caught, slightly lifted and, turning the drum, pulled out using pliers. A powerful magnet will help speed up the process. It is not easy to carry out the procedure yourself, so it is better to enlist the help of a second person.

Through the hole for the heating element

The method is only suitable for washing machines with a heating element located in the back of the body, like most models from Beko and LG. The work is carried out in stages:

The equipment is disconnected from the network, the water is drained and turned around so as to provide unobstructed access to its rear wall.
Unscrew the fixing bolts and remove the panel.
There is a “wheel” behind the wall. This is the pulley behind which the drum is attached. In some models it is sealed in a plastic case. The wires for powering the heating element are also connected here; they should be disconnected.
Remove the heating element. To do this, unscrew the fastening nut, then, gradually rocking the heater, remove it. It is recommended to descale the removed part.
Through the resulting cavity, access to the bottom of the tank opens, from where the metal arc from the bodice can be easily removed with a knitting needle or tweezers.
Install the heating element on the bracket provided for this purpose, tighten the nut, connect the wires and check the tightness of the assembly, for which the washing chamber is filled with water.

In Samsung brand technology, the heating element is located in the front. It is more difficult to disassemble, so it is better to choose another method of removing the foreign body.

Through the drain

In some cases, a metal arc from the bodice penetrates the drain pipe. To get it you need:

Move the machine to the middle of the room and free up space for maneuvers
Remove the detergent reservoir
Turn the device on its side
Remove the bottom fixing devices (bolts, valves) and remove the bottom panel
Remove the sealing rubber of the hatch
Unscrew the hose connecting the chamber and the drain filter, clean the pipe, remove the part of the bodice that has gotten inside
Reassemble the device following the reverse sequence of steps.

Equipment from different series and manufacturers has some design differences, so before removing the bone from the washing machine, you should study the sections of the instructions containing information about the nuances of disassembly.

Features of washing women's underwear

Wherever a bone gets in the washing machine, it can be removed using any of the following methods, but the problem can be avoided if you follow certain rules and know the safety precautions:

It is better to wash bras by hand rather than in a machine. After all, in this way you will avoid problems with a stuck bone, and the item of women's clothing will remain in its original form for a long time without deformation of the cups.
Use special zippered laundry bags. If you don’t want to spend money on buying bags, then a regular pillowcase with a zipper will do just fine.
Even before washing, you should make sure that the bra is not torn, especially in the area where the edge of the wire comes into contact with the fabric.
Using a container for bras, you don’t have to worry about the foam rubber getting wrinkled.

Signs of bone penetration and a method for identifying where it is stuck

Several symptoms indicate that a bone has gotten into the washing machine:

Grinding noise inside the spinning drum
Rust stains on washed clothes
Lack of underwire in bra

A frame element can end up in one of three places:

At the bottom of the drum
In the tank
In the cavity between the tank and the drum

To identify the position of the bone, you should carefully inspect the washing chamber. Take a flashlight and, slowly turning the drum by hand, inspect all the holes. As a rule, the foreign part is clearly visible at the bottom of the chamber. If it is not visible, it means that the location of the jam can only be determined after opening the equipment. Owners of some models from Bosch and Siemens with vertical loading of laundry are luckier in this regard. Their frames are equipped with special valves through which a foreign body can be pulled out.

Frame wire for a bra: what is it made of and what harm does it cause?

At first glance, if you compare the size of the machine and the linen accessories, it seems that it is unlikely to do any harm. But the point is not in size, but in the material from which the bone is made.

Most often, frames or bones for linen are made of metal or coated steel.

Getting stuck in the tank of the machine, such corsetry parts begin to rust, stain water and washable items, and can tear linen. And these are even the easiest of troubles. Much worse is that a sharp metal bone can easily pierce the washing machine tank, damage the coating of the heating element, tear the cuff or drain pipe.

If the fittings are made of plastic, then they are less destructive.

Although, when a plastic bone has fallen deep into the washing machine, it can also make a mess. For example, pierce the same drain pipe or slip into the pump and disable it.

This is interesting: The dishwasher does not fill with water: causes and solution to the problem

How to prevent the problem?

Before washing, carefully inspect your pockets, and after washing, carefully inspect your clothes and underwear with buttons and accessories for damage. Such scrupulousness will allow you not to start a new wash if an unnecessary item remains in the drum or at the bottom of the tank;
Send clothes with buttons and accessories to the middle of the drum so that they have less contact with the hatch and do not make ringing sounds;
For underwear, be sure to choose the delicate wash program - its main advantage is a small number of revolutions;
Buy special bags for washing bras and corsets. Reliable, simple and effective protection.

Why is it convenient to cooperate with?

We accept your applications daily from 7:00 to 23:00. We work seven days a week and holidays.
We have the most qualified technicians on staff who know the features of any model of washing machine on the market.
Urgent departure on the same day at a reasonable price!
Discounts for regular customers, special offers for you and your friends.

Call us right now - 8 (495) 411-66-77!

The second method is to remove the bone through the heating element

Attention! This method is suitable for horizontal washing machines with a rear heating element, when the heat element is located under the tank at the bottom.

You felt the drum and found nothing sticking out. This means that the accessories that “escaped” from the laundry have already slipped into the tank. From repair experience, craftsmen know that when a bone from a bra falls into the washing machine, most often it falls to the bottom of the tank and gets stuck in the TEN area. And you can get it out by removing the heating element from the washing machine tank. In fact, you need to remove the heating element, find and pull out the bone, and then put the heater in place.

For this:

Remove the back cover from the machine.
Turn off the power to the heating element, remove the terminals from the contacts. Typically, three wires are suitable for the heater: phase, neutral and ground. Phase and neutral have a terminal contact; the grounding contact can be secured with a nut on the central stud.
Loosen the fastening nut on the stud. You will see it when you remove the grounding. Unscrew the nut until it is flush with the end of the stud (there is no need to remove it at all).
Carefully press the pin inside the heating element so that it “sinks” up to the nut.
Move the heating element and remove it from the socket (sometimes serious effort is required).

Attention! Do not swing the heating element by its contacts or pry it with a screwdriver. You will damage the contact pins or sealing collar.

In half of the cases, the bone is removed along with the heating element because it gets stuck in the loop of the heater tube. In other cases, it is found at the bottom of the tank under the installation site. Often, instead of one fitting, there are two, or even three.

Housewives do not always associate the loss of a frame from a cup with the washing machine, and a bone can slip into the tank without noise or knocking, without showing signs of its presence. Therefore, it is located only when disassembling the heater, behind.

Inspect the TEN carefully for damage. Sometimes a metal strip breaks the heater very badly, literally into pieces.

But more often it leaves small dents or scratches on the tube, which are hardly noticeable. And the owners of the machine put the damaged element in the tank, and then are forced to carry out serious repairs to the equipment due to a breakdown of the heater, electrical short circuit and other surprises. Therefore, it is safer to immediately change even a slightly dented heating element.

When the bone is pulled out and the heater is normal, you can put it back in place.

The procedure will be the reverse of disassembly:

Push the center pin outward by pressing on the inner mounting plate.
Insert the heating element into the hole, gently pressing the cuff.
Screw the fastening nut onto the stud. Do not tighten it all the way, you will compress the seal and it will leak water from the tank. It is better to tighten it a little looser and then tighten it if necessary if moisture appears in the hole. But, as a rule, the seal seals the tank well and additional tightening of the nut is not necessary.
Connect the power supply to the TEN.
Plug in the machine and run a test wash without replacing the back cover. To check if there is a leak from the tank through the heater socket.

Attention! Be careful not to touch the inside of the machine with the lid removed while washing.

If everything is in order, there are no leaks, secure the lid, having first disconnected the washing machine from the mains.

How to remove a bra wire from a washing machine?

Why is it dangerous?
How to determine where the bone is stuck?
How to pull it out: key methods
Prevention

If a small object gets inside the washing machine, it may jeopardize the operation and functionality of the machine. Such an object could be a bone that has jumped out of a bra.

Why is it dangerous?

The danger of a bone that gets into the washing machine from a bra is primarily determined by the material it is made of. If it is a plastic part, then most likely it will not be able to damage anything inside the device, but due to its non-standard shape it will remain at the bottom of the washing machine and will be discovered during disassembly of the machine for another reason.

It's a completely different matter if the bra's wire is made of metal. If such an object gets inside the machine, it threatens not only scratches of the drum and damage to the hatch cuff, but also such serious damage as a leak from the tank, disconnection of the heating element, jamming of the drum and even a short circuit.

Even if the metal bone does not interfere with the moving parts of the device, its long stay inside the machine will cause rust. Especially if you are not in the habit of ventilating the unit after use, and the humidity in the bathroom is high.

If you hear a strong grinding sound and the sound of rubbing against metal, this is the first sign that a foreign object is dangerous to the operation of the washing machine. In this case, you should immediately interrupt the wash cycle to prevent damage to the heating element or other parts.

How to determine where the bone is stuck?

A bra bone caught in the drum can be found in the following places:

At the bottom of the drum.
At the bottom of the tank.
Between the tank and the drum.

A flashlight and a little patience will help you find such a small item. After turning the drum in a circle with your hand, inspect it inside and try to see the bottom of the tank. If you don't find a bone at the bottom, it's most likely stuck.

In this case, remove the pulley by unscrewing the bolt holding it. When you return the bolt to its place, do not tighten it all the way. Using a small hammer, gently tap the shaft so that the drum moves slightly and moves away from the tank. Next, slowly rotate the drum, waiting until the bone falls down.

How to pull it out: key methods

In a situation where a bra bone got inside the machine, owners of top-loading machines that have a special hatch were especially lucky. Such a hatch is precisely designed for removing foreign objects that have fallen inside the unit.

All other users have access to the following methods to get a wire from a bra:

Through the drain of the machine. After detaching the front panel, remove the rubber band from the drum. Next, by unscrewing the drain pipe, you will probably find a bone and be able to remove it.
Using a magnet (if the bone is made of metal) or a homemade hook, for which you will need a thin wire. Having pushed the bone with a knitting needle to a place convenient for removal, take the hook, lower it into the hole in the drum and try to pull the bone towards the drum and push it into its hole at least a few millimeters, and then remove it with tweezers.
By dismantling the heater. After unplugging the machine and unscrewing the cover, find the heating element, disconnect the wires, unscrew the nut in the center (not all the way) and press in the pin, then slightly swing the heating element and remove it from the machine. Reinstall the heater in the same order.

You can see some of the methods in the following video.

Prevention

To ensure that you no longer face the problem of removing your bra wire from the washing machine, follow some rules. In most cases, openwork bras are advised not to be machine washed at all, so hand washing will provide 100% protection against wires from bras getting into the machine tank.

If you still prefer to machine wash, wash your laundry in a specially designed bag or container. However, you can simply fold the bras into a cotton pillowcase. In addition, when loading laundry into the machine, inspect the bra and make sure that there is no visible damage in the area of the ends of the wires.

Washing machine height Standard height Will the washing machine fit under the sink? What other sizes are important when choosing? Not many people who…
Service life of the washing machine Requirements according to GOST Manufacturer's data What happens in practice? What factors affect service life?...
How to remove the top cover of a washing machine? How to remove the lid on most side loading machines How to remove the lid on machines with...
Repairing and checking the washing machine engine Types Methods of checking Causes of breakdowns and ways to eliminate them There are many factors that can lead to…

If you are lucky with your car model

Some of those who purchased a washing machine were very lucky, since it is very easy to remove the wire from a bra in some models of the unit. Lucky are those who, for example, bought a top-loading machine under the Bosch and Siemens brands. They have a special hatch through which you can get out small objects that accidentally get into the mechanism.

In this case, we offer you the following course of action:

— Close the drum doors. — Turn the drum half a turn. - Open the latch. Usually the hatch is located opposite the drum flaps. — Return the drum to its initial position with the doors open. — We remove the bone from the special hatch.

IMPORTANT! Please note that in future, in order to avoid such problems, you need to use special bags in which to wash clothes in a machine.

How to get a bone

Now let's look at the options on how to independently, in the correct way, remove a bone from a bra and other items from washing machines LG, Bosch, Samsung, Indesit, Veko, Zanussi, Indesit and other models.

We turn the device towards us so that we have a free gap on the back panel.
Some types of washing machines have a service hatch; if there is one, that’s great. We will need to open it. If it is missing, unscrew all the existing screws that hold the back cover.
Remove the back panel. In front of us we see the heart of the machine, the drum that carries out the washing process. Behind it there is a tank body made of plastic and metal.
The pulley from the tank is saturated with large contacts with wires; this is one of the parts of the heating element. The heating element is located in the tank itself, our task is to remove it.
We disconnect the contact wires of the heating element.
Between the contacts we should see a nut that secures the heating element. We turn it away.
We take the heating element with our hands, try to reach it with smooth movements, moving it towards ourselves.
Now that there is no heating element, we see the freed-up space in front of us. Thus, this will allow us to stick our hand in and find the bra wire in the washing machine by touch.

Disassembling the machine

What to do if another foreign object gets into the washing machine

The bra pit in the washing machine is not the only “uninvited guest.” During inspections, craftsmen find coins (even anniversary coins!), buttons, pins, curtain fittings, Lego parts, bolts, screws, nails and other small items. The dimensions of this “good” are smaller than those of a stone and they are less likely to linger in the perforations of the drum or at the bottom of the tank.

Their favorite habitats are:

Cuff near the door hatch. “Creeping small fry” easily gets into the fold and remains there.
Drain pipe. There are small metal parts, screws, and nails left in it.
Drain filter. There may be a warehouse of coins, nuts and screws, and small plastic items. Everything that slipped through the pipe, but did not have time or could not fly into the pump.

Water pump. It carries light plastic parts, such as parts of a children's construction set, matches, small fittings, and buttons.
Drain hose. Matches, small pins, and plastic dowels fly through the pump.

Since the size of this “good” is small, they usually do not cause significant harm, such as breaking the heating element or damaging the tank. But, for example, a nail or self-tapping screw is quite capable of damaging the heating tube, unraveling the perforation of the drum, or even making a hole in the tank. And it’s easy to break the pump or cause a blockage.

Therefore, if there is extraneous noise in the machine, pump noise or other strange sounds, it is worth looking to see if there are any foreign “guests” in the inside of the washing machine. If it’s difficult to handle on your own, call a repair specialist.

Are foreign objects in the machine body dangerous?

Often, during a thorough cleaning, a decent amount of foreign objects is found in the lower part of the drum casing. Theoretically, a bone, coin or small button will not harm the parts of the washing machine if they do not catch the moving parts of the machine and languish without attention. But more often than not, small parts immediately end up in the filter. And the bone, due to its non-standard shape, will remain to decorate the bottom of the device.

A grinding sound, a characteristic sound of sliding on metal, are clear signs that foreign objects must be urgently removed and the program must be stopped . A foreign object can cause deformation of the plastic insulator of the heating element or bearing seal, and in the future even lead to piercing the insulation of the heating element and a short circuit. Therefore, you should remove such unpleasant guests as soon as possible.

Please note that leaving metal objects in the bins of the machine for a long time provokes rust, and then rusty marks on clean laundry. This rule is especially relevant for devices that are not ventilated after the end of the program or are located in rooms with high humidity, such as a bathroom.

Such different bones

Women's busts and corsets are supported by underwires made of various materials. The possible harm and ease of eliminating the problem sometimes depends on the material of manufacture:

Iron bones can easily cause rusty water and marks on laundry; they are the ones that can scratch the drum the most and cause a lot of inconvenience. If an iron bone from a bra gets into the washing machine, the easiest way to get it out is with a magnet.
Plastic ones are the most harmless, since they are more pliable and flexible and cannot seriously scratch the body. But with the removal of this part of a woman’s wardrobe, you will have to work hard and disassemble the device.

Rules for washing bras with wires

To avoid problems with finding and removing the bone, you must follow the following rules when washing your bra:

always check the integrity of the seams on the product, if there are damages, sew them up before loading them into the machine;
place underwear in a special mesh bag, if there is none, in a pillowcase or other fabric shell that can be fastened;
use washing modes with a minimum number of revolutions (for example, “delicate”, “manual”);
clean by hand.

The presence of a stone in the washing machine drum is quite easy to detect, however, it is more difficult to get it out. The easiest way to remove the part is if it is still held in the holes of the mechanism, but if it has fallen, then you can get it through the drain or electric heater, and only by disassembling the device. In most cases, you can do this yourself, but it is better to prevent this problem from occurring and wash your clothes correctly.

How to prevent breakdown?

Prevention is the best way to prevent equipment failure due to a bra frame. To do this, manufacturers recommend adhering to several rules:

Wash underwear in special zippered bags or plastic frames. The latter will help not only protect the machine from foreign objects, but also prevent the foam cups from being crushed.
Wash the bra only on delicate cycles without spinning. Before loading laundry, you should also make sure that there are no holes or abrasions through which the frame part could jump out.
Give preference to hand washing rather than machine washing.

It is a good idea to check the clothes you are washing for any loose buttons, metal labels or zippers. It is also necessary to remove the contents of all pockets.

We take it out through the heating element

If the bone passes through the drum, it often falls down and gets stuck in the heating element or under it. You will need to remove the heating element to get it out. You can do this yourself if the heating element is located at the bottom of the machine. The procedure looks like this:

Remove the rear surface of the housing.
Disconnect power. Electricity is supplied to the heating element through a three-wire cable. In this case, phase and neutral are usually secured with terminals, and the ground wire is often fixed with a clamp nut.
Having disconnected the grounding from the central stud, you can see the fastening nut. Loosen the nut without unscrewing completely. Press the pin all the way into it.
Move the heating element. Get it. This usually requires considerable effort, but it is prohibited to use a screwdriver or other tools for this to avoid causing damage. Also, do not pull the heating element by the wires.
More often, the bone gets stuck between the heater tubes, so it is removed along with it. If it is missing, you should look in the heating element installation socket. She can fall under it and lie at the bottom.
Inspect the heating element for damage. Sometimes a metal bone can not only scratch it, but also break it into pieces.
After fixing the problem, you need to pull out the pin by pressing on the fastening part from the inside. Insert the heating element into the socket and gently press the cuff.
Tighten the fastening nut. If it is overtightened, it can tear the seal, leading to a leak. The seal seals the tank well, so the nut may be slightly undertightened. After a test wash, you can always tighten it if a drop of water is found on it.
Connect power to the heater.
Run a quick wash to check the operation of the machine. Do not touch the parts until the machine stops washing.

Advice:
If scratches and damage are found during inspection of the heating element, it is better to replace the part. During operation, such a heater can cause a short circuit, lead to machine breakdown and other unpleasant consequences.

Ways to remove a foreign object with parsing

If using wire, a magnet and pliers it was not possible to remove the wire from the bra from the machine (for example, such as the LG FH296WDS), then you will have to do this by choosing one of two other methods: through the hole for the heating element and through the drain. In any case, the washing equipment will have to be disassembled.

One rule for two methods: unplug the washing machine!

How to remove the machine without disassembling?

In some situations, it is possible to remove a bra wire from a washing machine without first disassembling it.

If only the tip of plastic or metal is stuck inside, you need to carefully remove it with tweezers. If it gets inside the device, then you should bend the cuff, move the drum in the opposite direction and try to find the bra part there. Next, if the part is there, take the hook and hook it. Part of the laundry made of metal can be easily removed using a magnet. If all else fails, then you cannot do without partial disassembly of the device.

If you do not have experience and skills in disassembling equipment, it is better to contact StirTech specialists, who will quickly and inexpensively do this work. Call us

Through the heating element hole

You can remove the bra wire from the machine by using the hole in the heating element. You need to rotate the device to remove the back panel. Next, remove the fastening components and the cover. Behind the pulley (large wheel), there is a tank. There are heating element wires under the wheel itself. It itself is installed in the tank. You should remove the heating element by first disconnecting its wires and unscrewing the fastening nut (usually located between the contacts). Then you need to grab the device and gently pull it towards you.

When the mechanism is unscrewed and removed, you need to try to feel the foreign object by sticking your hand inside the hole. You can also use wire or a hook for this.

Boris Vitalievich

master

Ask a Question

Important! Some appliance models have the heater mounted in the front rather than the back. It is quite difficult and inconvenient to disconnect the front panel - it is recommended to seek help from specialists. If you still manage to unfasten the cover, then you need to perform the above actions with the heating element.

If everything works, then install the heating element back and turn on the quick wash mode to make sure the tank is sealed.

Through the drain

If a foreign object ends up in the drain pipe, then removing the heating element will not help. To do this, you will need to remove the pipe itself, which is located at the bottom of the washing machine. The part is attached to the pump, tank and to remove it, you need to carefully unscrew the clamps. Next, remove it and clean it thoroughly.

Sometimes the drain pipe cannot be removed without dismantling the pump, so the pump is removed first.