13 Best Miter Saws

When processing building materials (wood, plastic, chipboard, fiberboard, plywood, aluminum, etc.) without a miter saw, it will be much more difficult to complete the tasks. With the advent of this tool, the time spent on creating tenon joints, all kinds of cuts and notches, oblique cuts, etc. was significantly reduced. And the use of combined equipment made it possible to perform almost the entire range of work on the preparation of materials based on wood or plastic.

Our review presents the best miter saws that are freely available and widely represented on the domestic market. For the convenience of the reader, the information review has been divided into several categories. Based on the reviews and characteristics of each individual model, an individual rating was assigned, according to which the tool received its position in the rating.

How to choose a quality miter saw?

It is important to choose a miter saw carefully, paying attention to several criteria at once. Only in this case will you be able to purchase a high-quality device that will serve for a really long time and with high quality, no matter how often you use it.

Be sure to consider various criteria when choosing miter saws
Naturally, there are other criteria. You definitely need to look at the price, since the cost of miter saws can vary greatly: similar models can have a price of 50 and 10 thousand rubles.

The manufacturer is also important - we do not recommend purchasing products from unknown manufacturers. There is a high probability that the device will simply stop working in a month or two, and no one will be able to change it, or repair it, because there will either be no warranty, or it will be “fake.” It is better to trust professionals and purchase miter saws in specialized stores.

These are the manufacturers that have earned the respect of consumers.

1. Bosch is a fairly popular manufacturer of miter saws and other equipment. Devices from this manufacturer are of high quality and relatively low price.
2. Makita - miter saws from this manufacturer are presented in a wide range. The price of the products is rather high, but the quality does not disappoint.
3. Metabo is another popular manufacturer whose products attract attention with their quality, high engine power, and excellent equipment protection.
4. Bison A domestic manufacturer whose miter saws, like other power tools, have a budget price. The quality is top notch.
5. DeWALT - this manufacturer has miter saws with and without broaching. The price of the equipment is rather high, but this can be forgiven for the high quality of all power tools.

It is worth purchasing miter saws from well-known class=”aligncenter” width=”1116″ height=”1339″[/img] The most popular manufacturers of miter saws

Premium miter saws

Evolution RAGE3-S

It is small in size, which greatly facilitates the transportation and storage of this equipment. When using the tool, you will not have to change the disk if there is a need to cut a material of a different nature, which greatly saves time and increases labor productivity. Using a laser pointer, you will always be able to see the start and end of the cut, regardless of the angle of inclination of the blade. If necessary, the user can install a diamond-coated blade and cut ceramic tiles and even concrete products. The control handle has well-thought-out ergonomics - your palms and wrists do not get tired even with prolonged use of the tool. The device can successfully work with wood, aluminum and even steel. It is manufactured using patented RAGE technology, which provides reliable protection against overfeeding.

More: Top 10 best sealants for the bathroom, how to choose the right sealant

The saw is equipped with a high-quality, high-strength gearbox, which ensures low engine speeds and increased torque. The workpiece can be secured from above or from the side; the saw has a broach. Illumination of the working area is provided. If nails, screws or staples get under the saw blade, nothing will happen to it. All work is carried out without sparks, the cutting line is very clean, and there is a protective casing.

Advantages:

• Increased strength of the gearbox, allowing it to withstand both heavy loads and vibration that occurs when sawing steel;
• Reasonable price for a professional tool;
• Carefully thought out security system.

Flaws:

• Needs grounding.

Evolution RAGE3-S

Metabo KGS 315 Plus

One of the most powerful units in our entire review of the best miter saws. It is intended for sawing workpieces made of wood, plastic and various non-ferrous metals. It is strictly prohibited to use it for cutting ferrous metal. The tool is multifunctional, has small overall dimensions, so it can be used even in a home workshop. The motor power is 2200 W, which allows you to work even with hard wood. The working platform is carefully polished at the factory, so the material will easily slide both along the table and across it. The side shelves have a sliding mechanism, so you can work even with wide workpieces. The spindle is locked at the touch of a button. When the saw blade block is raised to the non-working position, it is covered with a protective cover. The saw deviates in both directions from the vertical.

The desktop is quite wide - its dimensions are 1070x505x365 mm; due to the adjustment lever, it can be rotated to the right by 47 degrees and to the left by 60 degrees. The gearbox is equipped with a belt drive, the number of disk revolutions can be adjusted - from 3100 to 4100 per minute, and there is a laser cutting line indicator. There is a smooth engine start system that reduces vibrations during startup, as well as a system for maintaining the number of revolutions regardless of the applied load.

Advantages:

• Quite a strong and reliable car;
• A soft start system is provided;
• Small overall dimensions;
• There is an adjustment of the number of revolutions;
• High build quality.

Flaws:

• Quite expensive;
• You won't be able to cut ferrous metal with it.

Metabo KGS 315 Plus

Makita LH1040F

Finally, we can introduce you to the leader of this part of our rating - this is a special combined miter saw from a world-famous manufacturer. It can be used both for its intended purpose and as a sawing machine. The tool can work with wood, soft metals and other similar materials. The diameter of the saw blade is slightly smaller than the standard one - 260 mm, the opening for installation is ordinary - 30 m. The rotating mechanism allows you to tilt it 45 degrees in each direction from the vertical. The saw can process workpieces whose thickness does not exceed 40 mm. A U-shaped extension is included in the kit. To prevent the disk from jamming during operation, the design is equipped with an original riving knife.

The device is equipped with an electric motor whose power is 1650 W. It starts up every time as smoothly as possible, largely thanks to the inrush current limiting system. The unit is carefully protected from all kinds of overloads by double insulation, so it can be used even without grounding. There is a braking system that stops the disk almost immediately after turning off the power. The maximum number of tool revolutions is 4800 per minute. Using original technology, you can even perform a rotary cut.

Advantages:

• Quite powerful products that can work with a wide variety of materials;
• All design control elements are conveniently located;
• No backlash was found, including when setting the required cutting angle.

Flaws:

• The illumination of the work area is somewhat weak;
• High price.

Combination saw LH 1040 F Makita

Makita LH1040F

Mid-range miter saws

BOSCH PCM 8

This product is an excellent choice for those who prefer to work at home. All cuts are high quality, accurate and efficient, regardless of the material used. The saw is capable of cutting even soft metals such as aluminum or copper. The workpiece is fixed using the original clamp. The laser greatly improves cutting accuracy. The tool has a carefully designed dust removal system to keep your work area clean. The power of the engine installed here is 1200 W, its maximum speed is 4700 per minute. The maximum cutting height is 70 mm. The diameter of the saw blade is standard - 210 mm with a mounting hole size of 30 mm. The overall dimensions of the entire structure are 770x410x570 with a weight of 20.5 kg, so moving the product from one place to another is not very easy.

More: Top 10 best onion varieties, choosing the best onion varieties!

The work area is illuminated with LED flashlights. It is worth noting that such a device can be used without grounding, since the device is equipped with a double insulation system. The handle is rubberized, the palm does not slip off it. The head will not lower by itself - the safety button will prevent it. If desired, the product can also be used to make grooves. Manufacturers have installed a spindle locking system, so you can replace the disc within seconds, and there is also a very effective cutting scale.

Advantages:

• Not too expensive products;
• High quality manufacturing and assembly;
• Carefully thought out security system;
• Availability of LED illumination of the working area and laser guide;
• Precise angles can be adjusted almost instantly.

Flaws:

• Quite a bulky product.

BOSCH PCM 8

Kraton MS-1900/254

The product has an electric motor with a power of 1900 W - this is one of the highest indicators in our entire review, the number of revolutions is 4800 per minute. The device operates efficiently and reliably, and practically does not break down. It is allowed to use not only wood as a working material, but also plastic, laminate, aluminum profile and other similar materials. The saw has small overall dimensions, so it is easy to move from one place to another. The main structural elements are made from high-quality alloys of low mass - the weight of the entire device is not very large. The saw is equipped with double guides that allow you to move the saw blade, in turn, this design solution allows you to work with wide workpieces - up to 310 mm.

The product is equipped with a spindle locking system, so the disc can be changed quickly if necessary. Dust is removed efficiently, since the saw has a special suction pipe, which can be connected to a dust collection bag or connected to a vacuum cleaner. The dimensions of the saw blade here are standard, and the tilt angles are also 45 degrees in each direction. The guide is located on linear ball bearings. Table extensions can be removed when not required. The cutting line is indicated by a laser pointer. The workpiece can be additionally secured in a special clamp.

Advantages:

• There is a disk immersion limiter, which allows you to make a cut to the required depth;
• There is a soft start system;
• High cutting accuracy;
• Excellent reliability;
• There is a broach that increases the cutting width to 310 mm;
• No backlash was noticed during testing.

Flaws:

• There is no protective cover.

Kraton MS-1900/254

Miter saw Metabo KGS 216 M

The tool is great for working with a wide variety of materials - wood, plastic, various decor intended for interior decoration. It belongs to the professional class, so it can be used not only at home, but also in the workshop. The product is equipped with a reliable electric motor, which has a high-quality protection system against overheating and overload, so the unit can be used in intensive mode. The product has a rubberized handle, overall dimensions and weight are insignificant. The design includes a broach that allows you to increase the cutting width to 305 mm. There is a cutting depth limiter. There are scales on the frame so that you can accurately set the angle.

The table is made of cast aluminum alloy, which resists even strong impacts. This greatly extends its service life. LED lighting is provided. The functionality is expanded, so the length of the table can be increased even without the use of special tools. The engine power is 1500 W; it provides a rotation speed of up to 5000 rpm per minute. On the body you can find side handles for comfortable carrying of the tool, a spindle lock is provided, and there are hooks for winding up the power cable. When folded, the saw is secured with a special lock.

Advantages:

• Excellent reliability;
• High revs with not the most powerful engine;
• Very convenient to work;
• Professional tool;
• Rubberized handle;
• Relatively small mass;
• Can be easily transported from place to place;
• Long power cable.

Flaws:

• There is no soft start system.

Review METABO KGS 216 M / IDEAL MITER SAW FOR THE WORKSHOP AND HOME

Miter saw Metabo KGS 216 M

Miter Saw With Broach Which Is Better

The best Miter saws rating: photos, characteristics, prices, reviews

We have collected for you photos, characteristics, prices and reviews of the Best Miter Saws rating.

Bosch GCM 8 SJL

• Miter saw
• power 1600 W
• disc diameter 216 mm
• weight 17.3 kg

from 23290 rub. up to 42400 rub.

Reviews of Bosch GCM 8 SJL

Advantages

Very stable. Everything you need can be configured and pulled out. Good angles, large broach and saw depth. The corner locks are very convenient so you don’t have to adjust them every time. If you connect a vacuum cleaner, it collects almost 100% of the shavings.

Flaws

Noisy (although this is a property of almost any trimmer)

A comment

I use it at home for a variety of woodworking projects and more. The tool gives pleasure from its use, you even want to come up with new problems to solve with the help of this cross-cutting tool. (I don't use it as a professional)

Advantages

Workmanship, functionality, laser with cutting illumination

Flaws

terribly large and heavy. It only tilts in one direction. Rotation angle 52 degrees

A comment

I bought this miracle with a GTA 2600 workbench 2 weeks ago to build a frame house. I’m just delighted with it, it met all expectations in terms of functionality and performance. We cut 200x50 boards easily and naturally. Dexter miter saw with broach review, video.... Which crosscut is better? The coolest tools with a miter saw are your choice. The only negative is that it is simply huge and heavy. Carrying it is very inconvenient, transporting it is even more inconvenient. There is an error in the description. The rotation angle is 52 degrees, which was very disappointing because... There were cuts at 55 degrees, I had to saw with a circular saw.

Advantages

Excellent working new dust removal system, precision, ease of operation, pleasant details

Flaws

Disc diameter is too small

A comment

I have long wanted to buy a cross-cutting machine, but there was no reason. The reason appeared in the form of painted MDF skirting boards for my apartment. Because The repair process takes quite a lot of money. When choosing a saw, I had to listen to the toad and buy a not very expensive one. As a result, I bought this saw on sale complete with a Bosch GTA 2600 gift table. Painted MDF is probably one of the most difficult materials to cut. A little bit - it immediately chips. But Bosch did not make a mistake - even with a standard blade (48) it coped with the task perfectly, and subsequently bought a CMT 273 series disk with 64 teeth - there are no chips even when sawing on the front surface. The plinth is high (100mm), so I had to cut it flat with my head tilted. The saw handles angles just fine. The head tilt scale is small, but I use a digital angle gauge, so this is not a significant drawback for me. When miter splicing two two-meter sticks, non-straightness occurred only in the vertical plane of the plinth, about 3 mm at 4 meters. The transparent laser protection curtain is very well made. When it becomes covered with sawdust, you can pull it out to wipe it and the laser shines brightly again. After a month of use, the emitter itself did not need to be cleaned. The dust removal system with two inputs works great! When the vacuum cleaner is connected, an insignificant amount of sawdust flies past. The gift workbench is beyond praise. It unfolds instantly, does not wobble, simple adjustment of the reach and height of the supports is very convenient. The only thing I added to it was to glue felt legs to the frame so as not to scratch the floors with them when folded upside down. I am 90% satisfied with the purchase, because... I wanted to buy something with a larger disk. I'm looking at Bosch GCM 12 GDL and Dewalt 780

Advantages

Clear cut, smooth start, good laser.

Flaws

Well, yes, a little big, but stable.

A comment

Gentlemen, I highly recommend it. I read the reviews and decided to buy it, I’m extremely happy. It’s a cool saw. It’s clear that it’s not cheap, but the quality is excellent. If you buy it, you won’t regret it.

Makita LH1040F

• Miter saw
• power 1650 W
• disc diameter 260 mm
• smooth start
• weight 14 kg

from 29557 rub. up to 35560 rub.

Reviews of Makita LH1040F

Advantages

No backlash, precise angles, lightweight and transportable, but at the same time stable.

Flaws

Hard start with rattling sound. As I understand it, it’s not just me. It is not a malfunction.

A comment

A good all-rounder, I finally bought an accurate tool, and not plus or minus a bast shoe. Enkor, now you can throw it away to someone. Unfolds 50 mm oak beams without straining. The DeWalt DW 710 is resting - it can only cut matches. Of course, there is no laser, a fixed rail with one-sided fastening, no soft start, no vice included, but for 14 thousand no one has them.

READ Husqvarna 137 Chainsaw Doesn't Start Cause

Makita LS1216

• Miter saw
• power 1650 W
• disc diameter 305 mm
• smooth start
• weight 26.1 kg

from 53371 rub. up to 65188 rub.

Reviews of Makita LS1216

Advantages

The quality of the cut is more than ideal, tilt adjustments in all planes, smooth start, quick stop.

Flaws

A comment

We make wooden stairs; there are simply no other saws suitable for such work. The device is simply excellent. The ideal assembly and design of the guides ensure very soft and precise movement of the saw without the slightest backlash. The cut turns out almost as polished. It takes two people to carry a fairly heavy 27 kg.

Advantages

High quality. 5 years warranty, although from Makita it’s 1 year, the rest I understood from the seller.

Flaws

NO LASER! and there is no light. Why not do such things in the TOP model is a mystery to me. It is clear that there are L and LS models that have it, but they are not supplied to Russia. In my opinion, the blocking of the guides was not implemented very well. It was worth thinking about the anthers for the guides.

A comment

On the case it says that it was made in Great Britain, although other sources say Japan. Special thanks to the VseInstruments store. Despite all the turbulence with the ruble, we worked at 5))

JET JSMS-10L

• Miter saw
• disc diameter 254 mm
• weight 18 kg

from 17500 rub. up to 23522 rub.

Reviews of JET JSMS-10L

Flaws

A comment

Nice saw. I've done so many things with it at the dacha in 3 years. Helped a lot. Miter saw with or without broaching, which is better? Miter saw with broach can. I made floors in the house, a shower and toilet, a shed, and so on for small things. You can do it with such clarity with a circular saw, but it’s more difficult and takes longer. Yes, it’s heavy, about 30 kg. For me, this is a plus. I laid a two-meter board and tightened it, it didn’t even move.

Which miter saw to choose for DIY? Comparison of cheap miter saws Stanley STSM1510 and Makita LS1040

UPD. Catch a little insider. saw

will cost less than 200 in the near future. That's it then. let's live!

My criterion for choosing a miter saw video response to a subscriber

Discounts on hand and power tools. electrical instruments from China.

And the prices now are just terrible. They jumped twice. It's good that I took it before the price went up. Now the toad would strangle for a long time

Advantages

Adequate price for functionality. The broaching mechanism allows you to work with a wide board. When there is no need for high cutting accuracy, it is convenient to use a laser instead of a template. The set includes table extenders and a clamp.

Flaws

The disadvantages are not fundamental. Inadequately large packaging - after purchase I only had to put the saw in the trunk. There is space to install a clamp on the left and right, but on the right it is useless, since that is where the engine goes down. It would be better to make a horizontal clamp mount on the right or supply a low clamp. The kit could have included a small plastic triangle for setting angles of 90 and 45 (like Makit). The bag for collecting sawdust is rather decorative - for normal operation you need to connect a vacuum cleaner. A soft start wouldn't be amiss.

A comment

After purchase, you only need to install the table extenders and the clamp, everything else goes in its place. Initially, the horizontal angle of 90 was set with an error of about 2 degrees, the laser also looked a little to the side. I set it to 90 on a small square - I got a deviation of about 2 mm by 60 cm (I checked it by placing the cut block on the end and measuring the deviation of the sides of its top from the square). Then I figured out to take a large square and set the angle when the saw was fully pulled. A similar deviation became about 1 mm per 60 cm. It is probably no longer possible to obtain a more accurate result without a trained hand due to the fact that with your hand you can slightly accidentally deflect the saw to the left or to the right when cutting. I worked on it for 2 weeks and made about 200 cuts. I liked the saw. I'm just thinking about getting a disk with more teeth for more accurate work.

READ Miter Saw Bison 210 1500

Advantages

Good cutting width (305 mm with broach ) for trimming for this money.

Flaws

The silumin guide was cracked in half. Where the guide bolts are attached, the base is cracked in 2 out of 4 places. Cannot cut 50mm boards at a 45 degree angle.

A comment

Good price-performance ratio. I can't speak for the quality - the crack appeared after a few days of moderate use. I built and finished 2 houses with her help, while she is still alive, I changed the guide (800 rubles). At some point the laser stopped pointing, but the light was on. Which miter saw is better, rating of miter saws with broaching. The device is better. Quite heavy.

Advantages

Incredibly powerful and productive saw. Build quality 10

Flaws

The laser pointer is sensitive to sudden changes in voltage - it immediately burns out (but this is a trifle - I have never used it at all).

A comment

An incredibly reliable tool for super-professionals - I personally tested it over 5 years in incredibly difficult conditions.

Bosch PCM 7

• Miter saw
• power 1100 W
• disc diameter 190 mm
• weight 8 kg

from 10834 rub. up to 16981 rub.

Bosch PCM 7 reviews

Advantages

Lightweight, compact. Very precise cutting of corners.

Flaws

1. The laser shines at a very sharp angle (almost parallel to the floor), which is why it does not always fully illuminate relief workpieces (for example, a door frame). Because of this, it is sometimes impossible to saw off the exact length the first time: you first have to cut it by eye with a margin, then gradually move the workpiece so that the disc is exactly above the mark. In principle, you can do without a laser in this way, which is what I did when the batteries ran out. 2. The clamp is a little short, which is why sometimes you just have to hold the workpiece with your hand, but this does not affect the quality of the cut and ease of use. 3. After several dozen cuts, the plastic handle of the angle lock broke. It turns out that there are amateurs who use the connection of plastic with metal in power units at Bosch. The breakdown is not critical, this lock can be tightened with pliers, but I always expect the highest quality in everything from a Bosch tool; The joints stained with snot somehow do not fit with the image of this company. 4. The protective casing rises with quite a lot of force (resting against the workpiece, the roller does not roll along it, but simply gets stuck), creating inconvenience in work. I decided to remove this cover. I won’t say that I advise everyone to do this (after all, safety is safety), but working after this became incomparably more convenient.

A comment

Much can be forgiven for the low weight of the saw, this is its huge advantage. It's a pity that it has a small disc diameter. But now saws with a 25 cm disc have already appeared from Metabo and Makita, and they are not much heavier than this saw - 9-11 kg each. If they hold the angle as accurately as this one, then it's probably better to take them. I haven’t seen any light saws from Bosch with a 25 cm disc. Yes, I still don’t recommend using Bosch saw blades: in my experience, they have a very short resource, and one disc for a manual circular saw started smoking so much from the very first centimeter of sawing, that it was impossible to be in the room (the defect was either in the sharpening or in the setting of the teeth). I use Runex disks: they cost 1.5-2 times less than Bosch, and in terms of performance characteristics they are heaven and earth.

Advantages

Compactness, weight, build quality, lack of play (precise saw angles and perfectly straight ends), price of the machine itself, price of saw blades.

Flaws

A little noisy when turned on, after a moment the sound becomes quite comfortable. Less than half ends up in the sawdust bag, the rest scatters about a meter and a half. Both shortcomings are rather nitpicking, the drink was super.

A comment

Purchased for sawing aluminum profiles for mosquito net frames, it performs its task perfectly, I cut up to 8 profiles at a time, the quality of the ends is beyond praise. The laser is very convenient - I have never missed a cut. The size and weight of the saw make it quite possible to carry it in the trunk and carry it to sites. A miter saw is a circular saw with an electric drive for broaching. 190mm discs are quite common and not expensive, for example, a disc with which I cut an aluminum profile was bought for 500-odd rubles.

READ Garden Saw For Trimming Trees

Advantages

Lightweight, compact, laser helps a lot, fast

Flaws

I haven’t found one for myself, unless there is such a large selection of saw blades for this particular model (diameter 190 mm and socket 30 mm)

A comment

I purchased this model after reading a lot of reviews and comments on the Internet. There were certain doubts, since I had previously used a miter saw from another manufacturer and there were certain problems with the accuracy of cutting corners. I use this saw to install doors, cut corners and lay laminate flooring. The circle does not saw through the laminate to the end (the diameter of the circle is 190 mm), but due to the fact that the laser beam is very bright and accurate, it is not a problem to saw through it on the other side. So it was perfect for my purposes. And if you take into account the compactness and weight, it becomes obvious that this is a worthy model. Separately, I would like to say about cutting the corners, they are ideal and, what is important, you can set almost any angle value. I recommend this model for purchase.

Advantages

Weight, size, laser pointer.

Flaws

Haven't noticed it yet.

A comment

Cuts wood perfectly, like clockwork. And working with a laser pointer is generally a pleasure - it maintains the cutting angle perfectly. So far, after six months of use, not a single problem. I recommend!

Metabo KGS 216 PLUS

• Miter saw
• power 1600 W
• disc diameter 216 mm
• smooth speed control
• smooth start

from 30267 rub. up to 38025 rub.

Reviews of Metabo KGS 216 PLUS

Advantages

A very quiet saw if you compare the Younger brother kgs 216. The perfect cut leaves chips only if the saw blade is damaged. The laser does not get clogged, it is possible to fine-tune (clockwise, right to left and laser thickness, respectively) Smooth start (workpieces never flew off) Bilateral slope of 45 degrees. Telescopic movement without play (it can be adjusted if it gets loose). A good disc included, I sharpened it a couple of times in a year (there are also some disadvantages).

Flaws

Now comes the fun part. This is her WEIGHT. 21 kg. The car is good but very heavy. It’s not at all compact even in the stowed position (the carriage is 45 degrees all the way) I was very surprised by its dimensions when they brought it to me. The Saw Blade is good, but its price is around 2600 rubles and there are simply no cheaper analogues. The 216 blade is produced only by Metabo and is killed by chipboard once or twice. Well, a small minus: the elastic bands (under the legs) were lost after a year of work. I advise you to glue them right away.

A comment

Due to the weight of the dimensions and the disk, 4 points. But I'm still happy. I’ve already paid back my money 20 times or even more.

Advantages

Very precise cutting, the laser is not clogged with sawdust. Wonderful belt drive. Low noise

Flaws

Perhaps the weight could be a little less

Advantages

A clean, accurate saw, a very high-quality and reliable tool, the included saw blade cuts boards like butter, I work in the winter, no complaints about the plastic elements or the cord, which is important because In winter, many cords become tanned, and the plastic becomes brittle and begins to break and crack.

Flaws

The protective casing becomes loose over time and begins to cover the laser.

A comment

An excellent tool for your tasks.

Advantages

Precise saw, no play, comfortable handle, laser mark.

Flaws

On my copy, latch 90 operates at 90.5. That is, it lies by about 0.5 degrees. I don’t know, maybe this can be adjusted, I just set the angle by hand, without a latch. Dear =)

Source