Not everyone knows how to properly use equipment for washing clothes, although at first glance it seems as if everything is extremely simple. Even models like LG have their own characteristics. When working with them, be sure to follow the instructions. And if it is not there, certain problems may arise. In this case, you have to look for information related to this issue on the Internet. Below we discuss how to use an LG washing machine.
First you need to start the device correctly. In this case, you should focus on the information that is on the control panel. Since most LG washing machines are assembled in our country, their menu is Russified, which is very convenient for users.
The order of actions to be done
The device is placed on a fairly flat and hard surface. In this case, it is important to adjust the legs so that the machine stands level and on all legs. It should not wobble; this should be checked immediately.
Then connect the device to the water supply, and correctly tilt the hose to drain the water. The laundry is loaded into the drum. In this case, colored and white items, light and heavy items are loaded separately, for example, sweaters and trousers are washed separately from socks, etc.
The further procedure for the user is as follows:
- the required amount of machine powder is poured in and conditioner is added if necessary,
- the machine is plugged into the mains,
- On the device control panel, press the On button,
- after the signal, you need to select the appropriate washing program manually or using the touch control panel,
- All you have to do is click the Start button.
Immediately before starting, you can separately select the appropriate washing temperature and a number of other parameters in a particular case. If the unit is new and has never been used, it is better to run it without laundry on the shortest mode of all, using powder or a special product intended for the first wash.
This will allow you to wash off all the factory dirt that is in the drum, and at the same time check how efficient the purchased equipment is.
Please note that the device can only be used if it is first correctly connected to the drain and water supply. If this is not done, there may be crashes and program freezes.
It is important to check the compartment designed for draining water. It is located directly under the hatch on the device body. There should be no accumulation of any debris or objects that fall into the water during washing.
Automatic machines have a useful function called Drum Cleaning. It must be used regularly to extend the life of the purchased unit.
Activator and drum type machines
The basis of the device is its tank. It is filled with water, then clothes are placed in it, and a suitable detergent is poured in (this can be a high-quality powder and conditioner).
There are different types of washing machines, for example, activator. Water circulates in them due to a special activator in the form of a disk located in the bottom of the tank. The laundry must be loaded into the tank, add detergent and then fill it with water, then close it tightly. When the operating cycle is completed, the water should be drained manually.
As for drum-type devices, they are distinguished by the presence of a drum in the tank. When using them, you only need to load the laundry and add detergent. After this, the tank is closed and water is poured. A number of such devices have a spinning device. Any operations must be performed independently: pouring and draining water, etc.
If you're afraid of making a mistake
Operating an automatic machine is not at all as complicated as it might seem at first glance. The main thing is to follow the basic recommendations for using the washing machine. Basic tips for users:
- do not be lazy to read the instructions for the equipment, even if you have previously used a machine of a different model, and it would seem that you know everything about automatic washing;
- measure the hardness level of tap water and select suitable detergents that protect the washing machine elements from scale formation;
- Do not change the washing parameters if the machine has already filled with water and started working. Otherwise, problems with the electronics may occur;
- do not overload the machine, at the same time do not “drive” the machine with an almost empty drum;
- at the end of washing, wipe the unit, leave the hatch door open;
- Do not place heavy objects on the top cover of the SMA.
Now you know how to start washing on LG machines. If you follow the basic recommendations for using the equipment, the automatic machine will delight you with high quality washing for many years.
Interesting:
- Turning on the Beko washing machine
- Removing shipping bolts on a Candy washing machine
- Rating of Samsung washing machines
- How to use the Atlant washing machine?
- Whirlpool washing machine error codes
- Dimensions of the Indesit washing machine
Reader comments
- Share your opinion - leave a comment
Recommendations
To extend the service life of equipment, it is very important to follow certain washing rules.
- When washing newly purchased products, you first need to look at their label or tag to see if they can be washed by machine, or is it recommended to do it manually,
- First, the linen is carefully sorted by fabric type and color,
- it is important not to forget to check your pockets, remove from them all small items forgotten there, money,
- Before you start washing, you should check that buttons and other parts are securely fastened to the clothes,
- Clothing with zippers, all kinds of jackets, trousers and other similar things should be turned inside out so they can be washed more efficiently.
Typically, various washing powders or high-quality liquid substances are used. Liquid solutions are best. Powders do not always dissolve well in hard water. This is their problem. In addition, liquid substances are better able to wash dirt from clothes.
Some types of powders, as well as liquid specialized products, contain various substances that significantly soften the water used. They are great for hard water. If they are not used, the unit may quickly break down when using hard water.
There are special effective means for bleaching clothes that do not contain chlorine. You can also choose products designed for colored fabrics. To make the linen tender and soft and with a pleasant aroma, and to keep its shape, conditioners are used.
Most frequently used programs
LG machines can have up to twenty different washing modes. With their help, you can wash a wide variety of clothes with high quality. But the majority of users from all this variety usually use only a couple of main modes, while others launch them in exceptional cases, and sometimes do not use them at all. What programs are used most often in practice?
The most beloved mode by many is Quick 30. It allows you to thoroughly wash lightly soiled laundry. In this case, the washing temperature is about + 30 degrees, its duration is half an hour. When starting this mode, it is recommended to load about 2 kilograms of laundry.
Another very popular program is Cotton Quick. The mode is suitable for cotton items. In this case, the maximum drum load is usually no more than 7 kilograms, depending on the specific model of the device.
The temperature is usually about + 60 C. But it can be higher (up to + 90 C). The appropriate spin speed is also selected and the rinse can be selected. In total, the washing time in this mode is about one and a half hours, possibly more.
As for delicate washing of items (the rule also applies to items made of wool), the corresponding program is usually turned on for one hour.
It is possible to turn on the mode for washing baby's clothes. It will effectively deal with heavy dirt and stains. The temperature of this mode can vary from + 60 C to + 95 C
There is a special mode for washing duvets, bulky items, and synthetics. They are used less often in practice, but they may also be needed. There is a program for mixed fabrics. It is possible to select simultaneously several fabrics with different compositions at a temperature of + 40 C.
There is also a special mode that includes Rinsing things, including their subsequent spinning.
It is possible to turn on silent washing. It is suitable for clothes that are not heavily soiled. The most important thing with this type of washing is that it provides a low noise level.
A correctly selected washing mode can protect items from unsuitable temperatures.
Sometimes LG equipment also has various additional functions, for example, half-loading of clothes, easy ironing. Sometimes the device has the ability to lock the doors from children (they are not always available, it depends on the model)
We organize drainage of waste water
The easiest way to organize the drainage of waste water from the machine is to lower the end of the hose into the bathtub, toilet or sink. The liquid will first enter the plumbing, and then into the central sewer pipe. But all this action looks unaesthetic from the outside, and in addition threatens to stain the snow-white ceramics. Therefore, it is better to go the other way and act through the siphon.
First of all, open the instructions for the washing machine. The manual has a special paragraph about connecting to the sewer system, where requirements for the height of the bend of the drain channel may be prescribed. As a rule, it is necessary to raise the pipe by 50 cm or higher. But it all depends on the specific model of the machine.
If the washing machine has a non-return valve, then the height of the bend of the drain hose does not matter.
Having found out the connection details, we install a special siphon under the sink, put a hose on it and secure it with a clamp. If you plan to connect directly to the sewer pipe, then purchase the appropriate rubber gasket. We place it at the joint, and then stretch the sleeve. Do not forget to securely fix all elements, since leakage should not appear.
Control Panel
The control panels of the devices are similar in different models. They may or may not have a display, and its size varies in each model. The location of the various additional buttons also differs.
The selection of programs occurs using the selector. For example, this is what the control panel of the F1296ND4 model is like. The toggle switch here is located on the panel on the left side. It has 13 different programs, and the user is given the opportunity to choose any of them. When selected, a special indicator lights up.
On the right there are buttons, as well as a display with numbers. Here you can find the information the user needs regarding the remaining operating time of the device, the water heating temperature at a given time, and the spin speed.
At the bottom there are the following buttons: start the device, pause (it can always be turned on for a while if necessary), select the appropriate spin speed for clothes (it is indicated in revolutions), select the appropriate water temperature (for example, it can be cold water or water with warming up to + 30 C, etc.), turning on the wash.
There are also buttons to enable additional functions, such as low speed spin and others. When you press two buttons at once, the panel is blocked from use by children. In this case, the buttons stop working. At the same time, the CL code appears on the display.
By simultaneously pressing buttons numbers three and four, you can turn on drum cleaning. It is turned on when the unit is running idle (without clothes) for an hour and a half. In this case, the water heating should be + 60 C.
Using LG washing machines in practice is very simple, especially since modern devices have the information the user needs on the control panel.
Preparing equipment for installation
It will not be possible to immediately connect the machine to the communications and start the wash. Connecting an LG washing machine begins with the preparatory stage. We are talking about a number of mandatory events.
- Read the instructions supplied with the equipment . There is no need to neglect the user manual: the papers describe all the nuances, requirements and operating conditions.
- Carefully unpack the washing machine and remove all protective elements, film, ties and foam from the body.
- Unscrew the transport bolts. This is not difficult to do, but you can make a mistake. It’s better not to take risks, but to study the separate instructions that we have already described on our website.
It is prohibited to start the machine with transport bolts!
- Insert special plastic plugs into the holes from the previously removed bolts. There is no need to buy “chopiki” separately - they come complete with the washing machine.
Now the machine is ready for further manipulations. All that remains is to move the unit to the planned location so that access to the rear wall is free. Next, we proceed in order: first we organize a drain, then we connect to the water supply, level the body and set up the power supply.
