All the ways to hang a microwave on the wall

Basic ways to install a microwave oven in the kitchen

Methods for installing a microwave oven depend on its location in the kitchen space; these can be the following options:

• free-standing placement - the device is installed on a countertop, window sill or bar counter;
• installation in cabinet furniture, building structures or a specially made cabinet for household appliances;
• hanging installation - when fastening elements are mounted on the wall surface on which the microwave oven is installed.

Option to use a special shelf for installing a microwave oven

How does the fastener work when installing a microwave on a wall?

The main task of such supports is to securely fix equipment at a height, most often above the kitchen work area. The main requirement is the ability to withstand long-term static loads created by the weight of the installed equipment. The fastening elements of a microwave oven in the suspended installation method are fixed to the surface of a wall or other building structure using expansion dowels or anchor bolts, which depends on the material of these structures.

Reliability of fixation is ensured by the dimensions of the fastening elements (diameter and length), as well as their compliance with the material from which the surface on which they are installed is made. The standard mounting kit for a microwave oven includes fastening elements, but they may not be suitable for specific installation conditions

Microwave wall mount and its choice

You should approach the issue of choosing fasteners for fixing a microwave oven on the wall with special responsibility, because the quality of fastening and the safety of people in the kitchen depend on the quality of the fasteners.

Among the main parameters that determine the type of fasteners are the dimensions of the furnace and the total weight of the structure. In relation to the dimensions, the brackets are variable in length, so they are adjusted depending on the length of the unit.

They are selected to a certain, pre-measured length. But when taking into account the weight of the microwave, you should compare it with the material from which the wall on which it will be mounted is made. For example, when fixing a microwave on a concrete wall, no problems arise and it is possible to use less durable fasteners than when installing it on a wall made of plasterboard. But, first, it is recommended to read the instructions or technical parameters of the fastener, which must indicate the maximum weight of the device that it can withstand. It is preferable to choose fasteners with a small margin of 0.5-1 kg.

Pay due attention to such elements as clamps. They are designed to prevent the stove from accidentally falling. Most modern fasteners are equipped with them.

The last, but quite important parameter for choosing reliable and good fasteners is the attractiveness of the appearance. Although the fastener is almost invisible in the kitchen, manufacturers still offer a large selection of these parts in different colors and textures.

Most often they are plastic or steel. A combination of these materials is possible, which fits well into any interior style.

Types of wall mounts for microwave ovens

Devices designed for wall-mounted installation of a microwave oven are of two types - brackets and a stand, which differ in their design, but are similar in the method of mounting on the wall.

Brackets for microwave oven

Brackets are two L-shaped holders, in which one shelf is attached to the wall surface, and the second serves as a base on which the equipment is installed. A shelf intended for installing a microwave oven may have a telescopic design, making it possible to adjust the length of this element to the size of the model of the household appliance. The shelf, designed for mounting to the wall, has holes for attaching the bracket. Microwave bracket model “Holder MWS-2002” The brackets are made of metal and can be made without painting, in the case of using stainless or other non-corrosion steel, and also painted with powder paint.

Microwave oven stand

A stand or, in other words, a shelf hung on the wall and intended for installing a microwave oven, can be of various shapes and designs, made in a factory or independently from scrap materials. The main element of such a product is a shelf, fixed to the wall surface using corners, brackets or other structural elements using fasteners, as in the case of using brackets.

The shelf can be made of metal or durable plastic, wood or glass, and the structural elements that provide fastening to the wall are made of metal. Option for installing a multifunctional wall-mounted stand made of metal

How to hang a microwave oven on the wall correctly

The location of the appliance in the kitchen can be very diverse: above a small refrigerator, in a corner, above a floor stand, etc. The main thing is that the chosen location complies with the rules of ergonomic space. By following our recommendations, you can choose the most practical place for your microwave oven.

• We attach construction tape around the perimeter of the marks so that less construction debris falls onto the floor;
• Drill four holes according to the previously marked marks. We choose a drill of such a size that it is slightly smaller than a butterfly dowel or the same size if using an anchor;

Drywall today is an integral part of modern renovation. They cover the walls and ceilings in all areas of the apartment, including the toilet with bathroom and kitchen. But in this situation, many people have problems with how to hang a rather weighty object on such a wall, because the material may not withstand the load.

This issue is especially relevant for the kitchen, where there is little free space and you need to fit a lot of appliances.

• measure the length of the microwave;
• we measure its boundaries on the wall;
• depending on the types of brackets along the edges of the device, we determine where they are screwed into the wall;
• We mark them with crosses. In such a situation, do not forget to check the marks for evenness according to the building level.
• clearly consider the location of the device;
• You only need to use the fastening system for your model;
• Before purchasing fasteners and brackets, make sure they are in good working order and durable. There should be no chips, cracks or deformations on the fastening elements. Therefore, it is best to use steel products;
• You can only hang the device on the wall using anchor bolts or butterfly dowels. Otherwise, the structure will not be strong and may tear out the fastenings after a while.

How to Choose the Suitable Microwave Oven Holder

When choosing a microwave mounting element for installing it on the wall, the main criteria will be the following indicators:

1. Load capacity - determines the strength of the holder used, the ability to withstand the weight of the installed device without deforming the structural elements.
2. The ability to adjust the length of the shelf on which the microwave oven is installed.
3. Reliability – guaranteed by the manufacturer’s brand and the presence of a warranty period.
4. Price.

IMPORTANT ! In the absence of information about the weight of the microwave oven, it is best to purchase brackets with a permissible load of 70 kg of the weight of the equipment installed on them. Placing the microwave on the mounting brackets

Step-by-step installation instructions

Before hanging the microwave on the microwave oven bracket, you need to prepare the necessary tools and fasteners. You will need a drill with a perforation function or a construction hammer, a tape measure, a pencil, a level, a concrete drill and screws with dowels.

• First, the required distance between the corners is measured - it should correspond to the distance between the legs of the stove. On the wall, at the location of the stove, two vertical lines are drawn with a pencil, corresponding to the measured value.
• One of the corners is applied to the line and holes for fastening are marked on it. Next, using a hammer drill, the necessary recesses are made and dowels are driven in. The corner is placed against the wall and screwed into place.

For more precise markings with three holes, the bracket can first be screwed to the top mounting location, then mark the other two mounting points. Afterwards, the fixed corner is moved to the side and two other recesses are drilled, dowels are driven in, after which the corner is returned to its place and finally fixed on the wall.

• After installing the first holder, using a building level, the mark of the lower part of the second corner is transferred to the wall.
• The second bracket is applied to the wall, points for fastening are marked on a vertical line, recesses are drilled into which dowels are driven in, and the corner is attached with screws to the wall.

How to choose a mounting location for the bracket

To make it convenient to use a microwave oven, you need to choose the right place to install it. If such equipment is placed on the wall, experts recommend the following solutions:

• access to the device door must be free both to the control elements of the device and to the internal space of the working chamber;
• It is not recommended to place the microwave above the sink or next to the hob;
• the installation height above the floor should be such that it is convenient for all family members to use the device;
• When choosing an installation location, it is necessary to take into account the presence of a nearby plug socket through which the device will be connected to the electrical network.

FOR YOUR INFORMATION! For each microwave oven, there are original mounting brackets designed for a specific model. Placing the microwave on a shelf made of chipboard and metal mounting angles

How to choose a bracket for a microwave oven - mounting options

Despite the variety of mounts for microwave ovens, there is a set of indicators that you need to know when choosing a bracket:

1. Load capacity.
2. Possibility of adjusting the distance between metal corners.
3. Reliability of fastening.
4. Company manufacturer.

And the main thing is what dimensions of the microwave oven the bracket is designed for. After all, even if almost all models of microwave ovens have similar dimensions, their depth may well vary. And the length is not so important, since it is easy to adjust, increasing the gap between the corners of the structure. Therefore, adjusting the depth (or width) is quite difficult.

Read about how to install the bracket here:

About the shelf for a microwave oven - in a review article on our website

Read about what needs to be installed on the brackets in the article “Microwave oven with oven”

In addition, you should not forget that for a microwave oven to work well and for a long time, there must be a certain distance between it and the wall. Therefore, before buying a bracket for a microwave oven, add about 15-20 cm to its depth. Detailed information can be found in the passport for the household electrical appliance or simply by measuring the dimensions with a ruler.

How to hang a microwave on the wall

When all the elements are in place, you can begin installation and assembly of the structure. At this stage you need to prepare the fasteners and tools necessary for installation. When installing on lightweight partitions made of wood or plasterboard, anchor bolts are used; for brick or concrete walls, expansion dowels are used. In both cases, to carry out the work you will need an electric drill or screwdriver, a construction level, a tape measure and a pencil, as well as a set of screwdrivers, a hammer and wrenches. The bracket for the “Bravo FS01” microwave oven has a somewhat unusual design that allows you to adjust the size not only according to the length of the shelves, but also according to the distance between them. The work is performed in the following sequence:

• at the selected location, markings are made according to the holes on the bracket body;

Important! When marking the mounting points of the brackets, the locations of the fasteners on both brackets should be located in the same horizontal plane.

• holes are drilled at the marked points, the diameter of which must correspond to the fastening elements;
• when installed on light partitions, the holes are drilled through, when placed in solid walls - to the depth of the expansion dowel or anchor used;
• the fastening elements used are installed - the expansion dowels are hammered in, and the anchor bolts are secured using wrenches and a fixing nut;
• Brackets are installed and fixed in a given position.

Option for installing a shelf for a microwave oven from slab lumber. When the installation of the brackets is completed, it is necessary to check the observance of the horizontal plane between the shelves of the holders, they must be located in the same horizontal plane, as well as the strength of their fastening to the wall. After this, you can begin installing the microwave oven on the mounted structure; to do this, perform the following activities:

• the shelves of the brackets extend to the desired length, and if there is movement in width, this size is also adjustable;
• the microwave is installed on the prepared structure;
• its stability and the length of the power cable are checked to connect to the plug connection.

Placing brackets above a washing machine or refrigerator is completely justified and convenient to use

How to hang on the wall

Since it is better not to place a microwave next to an oven, gas stove or refrigerator, it is more convenient to hang the device. This not only ensures safety, but also saves space in the kitchen. You can easily reach the oven and set the temperature and cooking duration.

Brackets

Ready-made brackets are available for sale. They come in different colors. You can find ones that will match the tone of your microwave.

Brackets are steel holders with rubber linings. They are attached to the wall using glue and a plug. Withstands weight up to 80 kg.

Installation is carried out using:

• screws (included in the bracket kit);
• drills;
• screwdrivers;
• hammer drill;
• construction tape;
• plumb line.

First you need to make horizontal markings. The latter should be verified with a plumb line. It is necessary to drill holes and drive a couple of plastic plugs into them. They are needed for driving screws.

Important! Before purchasing, you should inspect the brackets for damage. If there are chips and scratches, it is better to choose another set.

Shelf

You don’t have to buy a shelf at a hardware store; you can make it yourself. To do this you will need plywood, board or hard plastic.

First you need to take measurements at the place where the shelf will be attached. Then you need to drill holes and put rods in them. To fix the position, you should take the clamping screw. It should be facing the wall. Otherwise it will be conspicuous. You can use corners.

The nuances of making your own wall-mounted bracket with a shelf for a microwave oven

When making it yourself, the most affordable option is to use chipboard or natural wood (boards) as a shelf for the microwave and metal mounting brackets. In this case, the main points that need to be taken into account when performing work will be the following nuances:

• the strength of the material used (chipboard, board) must be such as to ensure reliability during long-term operation of the microwave oven;
• metal mounting brackets must also have a certain strength margin in order to withstand the weight of the device without deforming its structure;
• the geometric dimensions and shape of the shelf can be arbitrary, but sufficient to accommodate a microwave oven.

The design and shape of the shelf for a microwave oven can be different, they depend on the imagination of the manufacturer and the availability of raw materials

How much does a good wall bracket for a microwave cost?

Brackets for installing microwave ovens, as a rule, are included with a specific model, but if they are not available (in a budget package), these products can be purchased separately. Such holders are sold in hardware stores and trade organizations dealing in household goods. The most popular bracket models are shown in the following table.

The price for microwave brackets indicated in the table is given as of the second quarter of 2021, when sold through a retail chain. If you still doubt whether or not you can install a bracket or stand for a microwave oven yourself, we recommend watching this video.