When carrying out construction and finishing work, you cannot do without high-quality and reliable tools. There is a certain set of devices that can be called irreplaceable. There are also devices available that you can do without, but they significantly increase the speed and efficiency of the production process. Construction staplers, which appeared not so long ago, have already gained popularity and become a mandatory element in the arsenal of every craftsman.
How to choose a construction stapler
Why do you need a stapler?
The device can be called a construction or furniture stapler, as well as an automatic staple gun. The devices were invented about 80 years ago, although the prototype of the modern device was used back in the 18th century.
The history of the stapler dates back to the 18th century
The main purpose of the tool is to fasten materials to the base. As a rule, it is wood or wood-containing boards (chipboard, MDF, etc.). Everything that a stapler can penetrate is nailed to such a surface. This can be a film or membrane for insulating a building, furniture upholstery or its components, roofing felt, carpeting, wooden slats, plastic finishing materials, etc.
The most common use of a construction stapler is in the woodworking industry and in furniture production.
The stapler can also be used to stitch together identical materials. In this case, the bracket is bent (the operation of such devices resembles the principle of operation of office stationery analogues). For example, you can’t do without a stapler when making corrugated cardboard packaging for large equipment. To do this, the tool must be equipped with a counter anvil.
Curling staples are used for stitching cardboard
Industrial stapler for cardboard
Prices for a reinforced stapler for cardboard
Reinforced stapler for cardboard
For convenience, many pistol models used in production are equipped with a foot pedal.
Using a stationary stapler
Stationary models
Any types of fastenings made using a stapler are reliable and durable.
Which construction stapler is better to buy?
From the review of the best mechanical and other construction staplers, it is clear that for each case there is a better option. For example, a mechanical or cordless tool is quite suitable for working with furniture upholstery. The main requirements for it are as follows:
- small weight;
- comfortable rubberized handle;
- sufficient store stock;
- ability to work with standard staples 4-14 mm;
- durability of the device;
- the ability to disassemble it into its component parts in order to lubricate it;
- safety - the presence of a stopper that prevents the staple from accidentally flying out.
Comment! In this regard, the best tools include: Stanley 6-TR250, Bosch HT 14, Bosch PTK 3.6, Milwaukee M12 BST-0.
Types of devices
To secure materials, you can use several types of devices, the operation of which differs fundamentally. Construction staplers can be classified depending on the type of mechanism. For domestic needs, mechanical and electrical devices are usually used, while pneumatics are indispensable when carrying out work on an industrial scale.
Mechanical
The simplest devices are manual. To work with them you have to apply some effort. However, they cost much less than their analogues, and their risk of failure is minimal.
Mechanical construction stapler for staples
Stapler prices
Construction stapler
The production process does not require electrical power or compressed air. Mechanical models have very little wear on parts. The only thing that sometimes needs to be done is to lubricate the tool. But such a device will not be able to nail any material to the base.
Manual models also differ slightly in mechanism.
With coil spring
Such devices are characterized by an insufficiently strong impact, as a result of which they are intended mainly for working with soft wood species.
Stapler device with coil spring
The tool life is not very significant - no more than 12,000 shots. When driving staples, the master feels a decent amount of feedback in his hand, which leads to fatigue during prolonged work.
A mechanical stapler with a coil spring is designed for working with soft wood and has a short resource
With spring (leaf spring)
The disadvantages that are present in the devices discussed above are not present in spring models. They are easier to cock, the shot itself is much stronger and does not require much effort. The recoil when scoring is almost not felt. The tool life is significantly different from the previous version. It reaches seventy-five thousand blows.
The device of a mechanical stapler with a leaf spring (spring)
Electrical
In devices of this type, the spring is bent using an electric drive. The bracket gets hammered after pressing the trigger lever. After this, the spring bends again and the stapler is ready for use.
Electric stapler. For large volumes of work, such a stapler will be indispensable
Carrying out work for a long time means using just such a tool. The speed of the process and the force of its shot are strikingly different from the characteristics of manual analogues. It becomes possible to use larger consumables (there are models capable of driving five-centimeter staples).
Electric stapler (construction electric stapler)
Electric guns can be mains powered or battery-powered. This helps to expand the range of their use, since it is not always possible to connect to the electrical network at the site of construction work, and the length of the cord is limited. But when installing the battery, the problem of excess weight of the device appears.
Cordless stapler
Prices for battery staplers
Rechargeable stapler
Important! If you accidentally press the button while the tool is suspended, the bracket will not fly out. Electric models are equipped with a special mechanism that protects against firing until the tool is pressed to the base.
Pneumatic
The shot force of such devices is comparable to that of electric models and even exceeds it. But the stapler requires compressed air to operate. Only where there is a compressor can devices of this type be used. The average performance of a pneumatic tool is one shot per second. Long pins and nails are not a problem for such a device. No special care is required for pistols of this type. Only O-rings, which are inexpensive, can wear out.
Pneumatic stapler
Prices for the model range of pneumatic staplers
Pneumatic staplers
Important! Despite the fact that a large number of metal parts are used in the design of pneumatic devices, they weigh very little - about 1 kg.
Most tool models are designed to use one type of consumables. But there are also types of staplers that work not only with staples (rectangular or rounded), but also with nails and pins. Such functional devices can be used for a wider range of work.
Hammer staplers, which are designed to secure staples by striking a tool against a structure, are useful in some situations. In this case, we are not talking about the accuracy of the location of the fastening points.
Staple hammer
To remove the equipment, in some cases it is impossible to do without a device for removing staples.
Staple extractor
Staple remover (anti-stapler): how to use
Prices for staple extractors (anti-stapler)
"Rapid" staple extractor R-3
Consumables
Before purchasing a device, you should study the range offered by manufacturers and choose an ergonomic, reliable and durable model.
Almost all models of staplers work with a certain type of staples, differing in material and geometry. The most common type of consumables is “P” - shaped equipment, which can have different sizes. Therefore, before purchasing a device, it is important to determine the type of fasteners required.
Types of brackets, their designations from different manufacturers and sizes
The most popular types of U-shaped consumables are staples belonging to types 53 (7 mm thick) and 140 (1.3 mm thick). When using the second type of equipment, the fixation area increases, and the risk of material breakthrough is significantly reduced. Other types of hairpins are used much less frequently.
For example, to cover upholstered furniture, a tool that works with pins up to 0.8 cm in length is sufficient. To work with materials that are thicker and denser, such as plywood or plasterboard, you need staplers capable of attaching larger staples. Their length can reach up to 1.6 cm.
To fix low-voltage cables of different cross-sections, U-shaped clamps types 36 and 28 are used.
The most common type of nails is 300. With their help you can fix, for example, hardboard on the back of furniture.
Nails, 12 mm, for furniture stapler, with head, type 300
Type 500 pins, which are nails without a head, are necessary for fastening structures when it is necessary to hide the base of the fastener for aesthetic reasons.
Nails 14 mm type 500 for furniture stapler, without head
Important! It is recommended to purchase original equipment to operate the stapler.
What to look for when choosing a tool
A convenient option is the ability to adjust the force. This addition allows you to select the required penetration force for bases of different densities.
The force is adjusted with a screw
Using this device, you can drive the staple flush with the surface, without excessively immersing the consumable into the base and without raising it above the structure. This ensures maximum aesthetics of the fastening. At the same time, the fixed material also does not deteriorate.
Before work, adjust the adjusting screw according to the material of the surface you are going to work with. If it is a loose surface, the force must be reduced so as not to tear the fabric
The rubberized handle makes work more comfortable. A minor improvement helps to significantly facilitate the work of the master.
Mechanical stapler with a comfortable handle
For storing or transporting the tool, it is convenient to fold the handle (lever). The possibility of accidental shots is also eliminated. Otherwise, it is recommended to remove the staples from the stapler.
Handle fixation
Sometimes, when working in confined spaces, the reach of the lever relative to the body matters.
In certain situations, the ability to re-strike a staple that is not completely driven in is useful.
When purchasing an electric tool, you should pay attention to the length of the power cord (it should not be less than 5 m), as well as the insulation from current.
The cord must be long and with high-quality insulation
The rate of fire of some electric models leaves much to be desired. Therefore, it is also recommended to pay attention to this indicator. On average, a stapler should be able to fire about 30 shots per minute.
In battery devices, important characteristics are the battery capacity and its recharging time. It is convenient if the kit includes a second replaceable unit.
A spare battery for a construction stapler can be useful for large amounts of work.
Most household staple guns are made of plastic. Due to this, they are light and not susceptible to corrosion processes. However, the most reliable and durable tool should be made of metal.
Stapler with metal body
Based on the above recommendations, it is not difficult to purchase a suitable stapler model.
Cordless furniture staplers
These models are battery operated. The battery in the device transfers energy to the engine.
MILWAUKEE M12
The device is manufactured by an American company. The battery is connected to the handle. The handle has a non-slip coating, which makes use comfortable. The impact force is easily controlled with your thumb using a wheel. The charge can be seen on the side of the case. There are 4 diodes that display the amount of charge. The device has a very high productivity (140 rounds per minute).
Price: 13,000-15,000 rubles.
MILWAUKEE M12
pros
- comfortable handle;
- excellent store capacity;
- Convenient spout for placing the device in the right place.
Minuses
- heavy weight, bulkiness;
- considerable cost.
Stapler MILWAUKEE M12
BOSCH PTK 3.6 Li 0.603.968.120
The tool is shaped like the letter C. The device has an extended spout, which makes it more convenient to use. The battery has a capacity of 1.3 A/h. The LED charging indicator will show how much energy is left in the device. The handle is made of rubber and is shaped to hold the hand for ease of use. The tool cannot be accidentally triggered due to the tight fit function (in order for the staple to come out, you must simultaneously press the stapler firmly against the surface and hold the trigger). The productivity of the mechanism is 30 staples per minute.
Price: 4000-4500 rubles.
BOSCH PTK 3.6 Li 0.603.968.120
pros
- high battery capacity;
- Excellent value for money and quality;
- 1000 staples from the manufacturer as a gift;
- comfortable handle.
Minuses
- power is not adjustable;
- bulkiness of the device.
Stapler BOSCH PTK 3.6 Li 0.603.968.120
What models are offered by the best manufacturers?
Today, consumers have the opportunity to purchase different types of tools, in any price segment, from well-known world brands to budget models.
| Model | Type | Type of equipment | Number of shots/min. | Weight, g | Equipment, features |
Bosch PTK 3.6 Li | Electric (battery). | Staples type 53, max length - 1 cm. | 30 | 740 | Staple quantity indicator, charger included. |
HAMMER HPE20 | Electric | Staples type 53, max length - 1.4 cm, nails type 300. | 20 | 800 | Rubber pads on the handle, 2 m cord. |
Stanley 6-TR150HL | Mechanical. | Type G staples, max length - 1.4 cm. | — | 670 | Adjustable shot force, metal body. |
Bosch HMT 53 | Stapler (hammer stapler). | Staples type 53, swing length - 0.8 cm. | — | 560 | Handle with finger protection. |
Rapid MS4.1 | Mechanical. | Cable cleats up to 1.2 cm long, nails and pins up to 1.5 cm. | — | 320 | Plastic body, adjustable shot force, convex tip for working in hard-to-reach areas. |
Metabo DKNG 40/50 | Pneumatic. | Staples of various types up to 4 cm long, nails up to 5 cm. | — | 1100 | Switching between staples and nails requires no retooling. Rubberized handle, convenient air vent, shot force adjustment, body made of composite material. To operate, a pressure of 7 atmospheres is required. |
Ryobi 18G ONE+ | Electric (battery). | Narrow 18G staples up to 3.8cm in size. | — | 2420 | LED backlight, the ability to attach to a belt, adjustable impact force, elastic coating of the handle. Battery and charger are not included. |
Metabo TAM 3034 | Electric. | Staples and nails up to 3 cm long. | 20 | 1800 | Adjustable impact force, multi-action impact unit, protective rubber shoe. |
The use of any type of stapler significantly improves the quality and efficiency of construction and repair work. If it is necessary to purchase devices, it is possible to select the appropriate model depending on the consumer’s requirements and capabilities.
The best cordless construction staplers
This tool works by driving the impact mechanism with a motor powered by a battery. This eases the load on the master’s hands and allows him to work longer without interruptions. But the working time is limited by the battery capacity.
Such staplers are produced for various types of staples and nails (U-shaped, T-shaped, I-shaped), which makes them suitable for furniture production or construction. Here is a rating of the best electric staplers, the models of which are equipped with a battery and have a large number of positive reviews in terms of reliability.
| DeWALT DCN 692P2 | AEG B16N18-0 451533 | Ryobi ONE+ R18N18G0 | |||||||
| Length of nails, mm | 50-90 | 19-65 | 16-51 | ||||||
| Weight, kg | 4,1 | 3,1 | 2,93 | ||||||
| Number of batteries included, pcs | 2 | No | No | ||||||
| Magazine capacity (nails), pcs. | 55 | 105 | 105 | ||||||
| Type of nails | D34 | SK64/T | 47/F/055/049/300/J/SK50 | ||||||
| Impact force adjustment | |||||||||
DeWALT DCN 692P2
American cordless stapler assembled in Europe. Equipped with a fully rubberized handle and two batteries with a capacity of 5.0 Ah.
+ Pros of DeWALT DCN 692P2
- The set includes two batteries.
- Can drive nails from 50 to 90 mm long.
- The magazine can hold up to 55 nails.
- There are two modes (single and high-speed) for different amounts of work.
- Can be used at temperatures from -20 to +50 degrees.
- The driving depth is adjustable by the operator.
- The slanted magazine does not interfere with getting to hard-to-reach places.
- When the magazine is empty, activation is blocked.
- If the nail becomes jammed, the body provides functionality for removing it.
— Cons of DeWALT DCN 692P2
- It weighs 4.1 kg, so your hands get tired quickly when mounted on the ceiling.
- It works well only with high-quality nails - if you buy cheap ones, they won’t hammer in completely and the hammer will jam inside.
- Over time, the back cover becomes loose.
- It is very powerful, so when working with soft wood (aspen, spruce), you need to adjust the blow, otherwise it will sink the head deeply.
Conclusion. A professional model for everyday work on a construction site. With brushless motor technology, it can withstand extended use. Suitable for fastening thick boards, beams, plywood, baseboards and cornices.
AEG B16N18-0 451533
Cordless stapler from a German brand. The magazine has a vertical, even feed and holds 105 nails. The impact force is controlled by a rotary switch on the body with an intuitive designation.
+ Pros AEG B16N18-0 451533
- Brushless motor technology extends its life.
- Makes up to 120 beats per minute.
- On one battery charge with a capacity of 5.0 Ah you can hammer up to 1400 nails.
- LED lighting makes working in poorly lit areas easier.
- Correct weight distribution and convenient location of buttons.
— Cons AEG B16N18-0 451533
- Sold without battery and charging adapter.
- Due to the vertical vertical position of the magazine, it can be difficult to get into a tight spot to execute a shot.
- Bulky and weighs over 3 kg.
Conclusion. Excellent stapler, thanks to working with nails 19-65 mm long, it is well suited for quickly fixing both thin and thick materials.
Ryobi ONE+ R18N18G0
A stapler with a rubberized handle and a bottom-mounted battery. It has two diodes for illumination and a wheel for adjusting the impact force at the end of the case.
+ Pros of Ryobi ONE+ R18N18G0
- Easy mode switching from single to serial.
- Clip for carrying the tool on a belt.
- On one 4.0 Ah battery charge you can hammer up to 1600 nails of maximum length.
- Can work with consumables with a length of 16-51 mm.
- Performs up to 60 beats per minute.
- The package includes 500 nails 32 mm long.
- There is almost no recoil to the hands after impact.
- Works well after driving over 20,000 nails.
- Safety guard against accidental shots.
— Cons of Ryobi ONE+ R18N18G0
- Sold without battery and power adapter.
- The vertical magazine makes it difficult to attach materials through small holes.
- Due to the weight of 3 kg, you can’t wear it on your belt for a long time.
- If not adjusted accurately, it leaves a deep mark from the striker.
- Demanding on the quality of nails.
Conclusion. This cordless stapler will be the best for installing lining. Thanks to the high-speed feed mode, you can quickly complete fasteners. When transferring workpieces, the tool can be hung on your belt using a special clip.
